Mesin bending putar

PROD-MASZ Abkantbank Biegemaschine Abkantbank 2m/0.8 BESTSELLER

Kondisi: baru, Tahun pembuatan: 2026, The best-selling and most reliable bending machine from PROD-MASZ! Fast delivery time and high quality! Bending machine from the sole, genuine, and reliable manufacturer PROD MASZ® Technical specifications: - Maximum working width: 2140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max. 145 degrees - Cutting with the rotary shear across the entire working width - Bending beam thickness: 15 mm - Upper beam lift in three positions - Upper beam stroke: 80 mm Degree scale Angle stop Rear support frame for sheet holding Fsdpjb Eg Hyjfx Adgjpb Front depth stops - Weight: approx. 180 kg The rotary shear (maximum cutting capacity 0.8 mm / steel) The machine complies with CE regulations and comes with a 12-month warranty. Price: €1,050.00 Delivery costs: €180 Rotary shear 0.8 mm – plus €350 Manual seam closer – plus €75 Delivery: every week Cash on delivery! We look forward to hearing from you! Invoices are issued with 0% VAT as an intra-community supply or plus 19% VAT, as applicable.

Kondisi: baru, Tahun pembuatan: 2025, This highly precise folding machine guarantees and enables the bending of steel sheets up to 1 mm, and for all non-ferrous metals, 30% higher bending capacity. Prod-Masz folding machines are distinguished by high quality, robustness, optimal functionality, and attractive design! Only high-grade materials are used in the manufacturing of these folding machines. Ultra-precise folding machine suitable for steel, copper, zinc, and aluminum sheets. These folding machines and all standard spare parts are available from stock. ZGR-3140/1.0 Maximum working width of the folding machine: 3140 mm Bending capacity: up to 1.0 mm (steel sheet) Bending angle of the machine: max. 145 degrees Bending beam thickness: 20 mm Cutting with rotary shear across the entire working width Upper beam adjustable to three positions Free passage opening: 80 mm Degree scale Angle stop Depth gauges Weight of the folding machine: approx. 600 kg Rotary shear 0.8 mm, additional 350 euros Hand seaming machine, additional 75 euros Delivery costs: 360 euros Price: 3400 euros Delivery time: every week Cash payment upon delivery We look forward to your inquiry! Invoices are issued with 0% VAT as an intra-community supply or plus 19% VAT. Fpodpjctuptofx Adgob

Kondisi: baru, Tahun pembuatan: 2025, Punctual delivery, reliable equipment! Prod-Masz folding machines – your best choice! Folding machine from the one and only genuine and reliable manufacturer PROD MASZ® Highly precise folding machine suitable for steel, copper, zinc, and aluminum sheets. These folding machines and all standard spare parts are available from stock. Shipping: 180 Euro Those who know us, know we keep our promises :) Long-standing employees guarantee continuity and a high standard of quality. Through ongoing training, they meet the highest demands. Fpsdpfx Asbntdmodgeb Bending angle: 145 degrees Working length: 2.14 m Width: 0.90 m Height: 1.20 m Daylight opening of the clamping beam: 80 mm Bending beam: 24 mm STEEL SHEET: 1.2 mm For non-ferrous metals approx. 30% higher bending capacity. The adjustment system allows for precise bending forms with various sheet thicknesses. The rear support tray is sturdy and easy to remove. Weight: 290 kg Roller shear ( up to 0.8 mm ) – plus 350 Euro Manual seam closer – plus 75 Euro Delivery schedule: weekly Payment in cash upon delivery We look forward to hearing from you! Invoices are issued either with 0% VAT for intra-community supplies or with an additional 19% German VAT.

Kondisi: baru, Tahun pembuatan: 2025, Delivery every Monday and Tuesday – RELIABLE! The PROD-MASZ brand stands for top-quality sheet metal bending machines. For over 20 years, we have provided complementary and optimal solutions for residential, industrial, and agricultural construction. Advanced technical expertise and modern technology enable our company to develop products that fully meet the needs of today’s professional roofers. Those who know us are aware that we are a trustworthy company :) Fpodpockm Hmsfx Adgeb ZGR-2140T/0.8 incl. transport rollers Technical specifications: - Working length: 2140 mm - Sheet thickness: 0.8 mm - Bending angle up to 145° - 12-month warranty - Upper beam can be raised in three stages - Max. daylight opening between beams: 80 mm - Non-ferrous metals: 30% more sheet thickness capacity - Weight approx. 180 kg - Bending beam: 15 mm - Rear rack for sheet support - CE certificate - Optional: roller shear +350 EUR, manual folding tool +75 EUR - Delivery costs: 180 EUR - Cash on delivery - Weekly deliveries We look forward to hearing from you!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Max. working width: 2520 mm For sheet thickness up to: 1.5 mm Fjdpoqi Awwefx Adgspb Upper beam opening width: 180 mm Adjustable bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Space requirement: 3630 x 750 x 1250 mm

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Fpodpfx Aed Ab H Hedgob Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! Straightening Press 150 tons with electric motor and additional manual hand operation via lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We can also build a custom press according to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode using a lever to raise and lower it. For precision tasks (e.g., pressing bearings, straightening, etc.), the press also features a manual hand pump, allowing you to finely adjust the force manually. The pressure cylinder is mounted on a sliding carriage, which allows it to be laterally shifted. This enables you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Pull chains for easy height adjustment - Heavy-duty machine frame - Laterally adjustable cylinder (mounted on sliding carriage) The press can be tested under power at our location. ----- Numerous other workshop presses available in various designs, sizes, and with optional additional equipment! 30, 60, 100, 150, 180, 200 tons. ----- Simply contact us for a non-binding consultation. The stated price is net, plus 19% VAT. All information provided without guarantee. Fjdpfx Adef Sqckogspb Europe-wide delivery possible! ----- The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place through telecommunications (email, fax, phone, messaging portal). We will first provide you with a non-binding offer, which will include our general terms and conditions and cancellation policy with company information, prior to purchase or conclusion of contract.

Kondisi: baru, Tahun pembuatan: 2025, Folding brake 3.64 m / 0.65 mm – Folding Bench, Swing Bending Machine - Working length: 3640 mm - For sheet thickness up to 0.65 mm (for non-ferrous metals: 30% greater sheet thickness) - Steel sheet: 0.65 mm - Bending angle: 145 degrees - Cutting along the entire working length - Upper beam lift in three stages - Maximum clear gap between beams: 80 mm - Rear frame for sheet holding - Gas pressure springs for lifting the beams - Weight: 550 kg - Warranty: 12 months - We deliver to Germany with our own delivery vehicles - CE certificate - Rotary shear 0.8 mm – €350 - Manual seam closer – €75 - Price: €2,600 - Delivery costs: €390 - Delivery: Weekly Fodpfx Adecntl Sogopb - Payment: Cash on delivery We look forward to your inquiry!

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: 01-15792, Offer 24194 Technical Specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 – 135° - Bending angle lockable with end stop - Upper beam operated via side handwheel - Max. upper beam stroke: 85 mm Fpsdpfxstylguj Adgjb - Max. adjustment of bending beam: 80 mm - Bending process assisted by counterweight - Required space: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1620 kg

Kondisi: baru, Tahun pembuatan: 2025, Prod-Masz is your competent and professional partner for the manufacture of sheet metal processing machines. Trust, honesty, and reliability are not just empty words with us! Model: ZGR-2140/1.2 Technical specifications: - Maximum working width: 2140 mm - Bending capacity: up to 1.2 mm (steel sheet) - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm - Upper beam adjustable to three positions - Gas pressure springs Fedpsccfh Hsfx Adgjpb - Clearance opening: 80 mm - Degree scale Angle stop Rear frame for supporting sheet metal Front depth stops - Weight: approx. 290 kg - The machine complies with CE regulations and comes with a 12-month warranty. Roller shear 0.8 mm available for an additional 350 euros Price: €1,550.00 Shipping: €180 Delivery: 2-4 days Cash payment upon delivery We look forward to hearing from you!