Meja putar las, perangkat pemutar

Protec W 3000

Kondisi: baru, Semiautomatic band saw for high-performance and highly precise cutting of medium-sized solid bars and profiles. The robust construction provides the machine with the necessary rigidity and cutting unit precision. Band operation is via a two-speed motor and a special reduction gear with bronze gear and tempered, ground worm screw. Flywheels are appropriately dimensioned. Sturdy band guides made with sealed ball bearings and adjustable carbide (Widia) plates. Blade tension is achieved by an electromechanical device with a micro-switch blade rotation control. Cpodpfx Abjfibd Tehju Safety devices are installed on the flywheel covers and the blade for operator protection. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repeated cuts to the same length Band cleaning device with brush Hydraulic power unit motor: 0.37 kW Electric pump for band coolant: 0.09 kW Vice jaw height: 200 mm Vice jaw length: 185 mm Worktable height: 760 mm Machine weight: 820 kg

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Technical specifications: - Load capacity: 15,000 kg - Net weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm - Roller diameter: 250 mm Cjdpfxsd Iuqae Abhopu - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Kondisi: baru, en-GB: GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid bars, and all types of profiles. Materials: Hard or mild steel, non-ferrous metals, plastics. Process: After setting up the workpiece support and the lateral stops, the burred workpiece is simply held against the brush, which rotates around its own axis. The workpiece itself is not rotated – this motion is performed by the brush. The material of the workpiece, burr thickness, and desired edge rounding determine the contact pressure and duration, typically around 1-5 seconds. Cpsdpfx Ajd Hmnfsbhsu Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, steplessly adjustable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø 300 (250) x 50 mm or 3 pieces Ø 300 (250) x 35 mm Drive power: 3.0 kW Power consumption: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Fuse: max. 16A Control voltage: 24V DC Width: approx. 500 mm + handwheel 74 mm + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max speed 82 dB(A) Scope of delivery: - Rotational head deburring brush machine GratMaxx with power socket (without cable) - Workpiece support table with adjustable angle stop and workpiece stops - Tool for brush replacement - Brushes not included in the scope of delivery! Accessories: F50201 Wire brush, twisted wire 0.38 mm F50202 Wire brush, steel wire 0.2 mm F50203 Wire brush, steel wire 0.38 mm F50204 Wire brush, stainless twisted wire 0.38 mm F50205 Abrasive nylon brush U180 F50206 Abrasive nylon brush U120 F50207 Wire brush, stainless wire 0.20 mm For further technical data, please refer to the attached PDF document.

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), The roller stand is also available for rental (including trial rental). Maximum load: 100 t per set, consisting of 1x drive unit and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotational speed: approx. 130 – 1,250 mm/min Cpjdpfx Absmk Iktehju Roller material: polyurethane Control: wired hand pendant Additional available options, e.g.: additional idler units, foot switch

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Csdpoqakbrsfx Abhopu Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Rotational speed: 0.03 - 1.6 rpm Cpsdpfx Asfxgp Uobhou Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transfer: 800 A

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Cedpfx Asftdh Iebhepu Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Further information is available upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Cpsdpfx Abeq N E U Aohsu Operating hours: 270 h Electric: yes

Kondisi: bekas, technic_details_001 Cpodpfx Abswa I Shjheu

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole, 100 - 200 mm Plate diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Cpsdpfx Aehua Dqebhou Rotational speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction