Einstander-hydraulikpresse-mit-ziehkissen-hydraulische-ziehpresse-tiefziehpresse-c-gestell-prod

RÖCHER REP 100.01 SZ

Single-column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ
Hydraulic Drawing Press
Machine No. 15.499 Year of manufacture 2003
Pressing force: 100 tons
Ram stroke: 500 mm
Throat depth: 370 mm
Installation height: 600 mm
Table surface: 850 x 700 mm with through-hole Ø 150 mm
Ram surface: 700 x 600 mm
Ram ejector force: 16 tonnes (160 kN)
Ram ejector stroke: 100 mm
Ram ejector with internal thread M24 x 1.5 mm
Drawing cushion force: 40 tonnes (400 kN)
Drawing cushion stroke: 200 mm
Drawing cushion surface: 530 x 530 mm
Pressure dwell time: 0 to 90 sec.
Table height above floor: 910 mm
Hydraulic operating pressure: max. 300 bar
Hydraulic tank capacity: 700 liters
Rapid approach speed: approx. 400 mm/sec
Pressing speed up to 23.8 tonnes (238 kN): 5 to 68 mm/sec
Pressing speed up to 100 tonnes (1000 kN): 5 to 16 mm/sec
Return speed: 50 to 400 mm/sec
Main pump motor rating: 18.5 kW
Auxiliary pump motor rating: 4 kW
Electrical connection: 400 Volt, 50 Hz (63 Amps)
- Operation and programming via PC 670 touch panel, keyboard, and mouse
- Machine control via SIEMENS S7-300 PLC
- Ram stroke and pressing force programmable via the control
- Drawing cushion with drawing and ejection function
- Drawing cushion force infinitely variable
- Ram and drawing cushion equipped with direct position measuring system
- Drawing cushion can be moved in and out of the press area for punching operations using the through-hole
- Floor-mounted setup, drawing cushion does not extend below floor level
- Pressure and position cut-off
- Fixed stop with indirect measuring system
- Pressure dwell time infinitely programmable
- Table surface with bores for drawing cushion ram rods
- Ram with ejector
- Cutting stroke damping
- Stroke release via two-hand operation, foot switch, manual lever, and pushbutton on control panel
- LEUZE light curtain as reach-in protection for safety operation
- Front mirror columns at the press table laterally movable
- Electrical switch cabinet mounted on machine frame
Giodpfoyupuljx Acyop
- Hydraulic oil cooler with fan motor (oil/air cooling)
- Manual central lubrication pump
- 2x hose lines for tool temperature control or cooling on the ram
- Piece counter in the control system
- 306 recorded operating hours
- Operating manual, hydraulic diagram, and electrical diagram available
Space required for press L x W x H: 3100 x 1800 x 4160 mm
Weight: approx. 13 tonnes
Very good, as-new condition

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.