Machining center

Röders RXP400DS/RXD5

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected Load: 15.3 kVA Rated Current: 25.6 A Short-Circuit Resistance: 2.5 kA Max. Turning Diameter: Ø 200 mm Max. Turning Diameter x Length: Ø 200 x 380 mm Swing Over Bed: Ø 450 mm Swing Over Cross Slide: Ø 300 mm Workpiece Weight (one-sided support): 120 kg Spindle Diameter: Ø 100 mm Spindle Nose: JIS A2-6 Spindle Bore: Ø 66 mm Spindle Speed Range: stepless Spindle Speed: 75 to 3000 rpm Number of Tool Stations: 12 Turret Type: Multitasking V12 Turret Tool Mounting External Turning Tools: 20 x 20 mm Tool Mounting Internal Turning Tools: Ø 32 mm Driven Tool Speed: 6000 rpm Travel Distance Z-Axis: 400 mm Travel Distance X-Axis: 165 mm Travel Distance Y-Axis: 80 mm Feed Rate Range: 0.001 to 1000 mm/rev Rapid Traverse Z-Axis: 25000 mm/min Rapid Traverse X-Axis: 20000 mm/min Rapid Traverse Y-Axis: 10000 mm/min Tailstock Quill Diameter: Ø 55 mm Tailstock Quill Stroke: 80 mm Machine Height: 2040 mm Installation Area: 2120 x 1750 mm Machine Weight: 4800 kg Year of Manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided. Crjdpfx Aajy R A N Asvsi

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 Csdpfxeuhbnno Aavori - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle speed: 3,000 rpm - Max. bar diameter: 80 mm - Max. machinable diameter: 300 mm - Max. diameter over bed: 520 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle speed: 6,000 rpm - Max. bar diameter: 53 mm - Minimum C-axis resolution: 0.001° - Travel: 520 mm TURRET - Number of positions: 12 - Travel X/Z: 230 / 460 mm - Driven tool speed: 4,500 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 22.5 kVA WEIGHT AND DIMENSIONS - Footprint: 3,050 x 1,860 mm - Machine height: 1,850 mm - Machine weight: 5,500 kg EQUIPMENT - Control: OSP-P300L-R - Coolant tank * with high-pressure pump - Chip conveyor - Parts remover - Parts conveyor belt - Bar feeder: Top Automation FU352 - Fire suppression system * * NB: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, DETALLES TECNICOS Cedpfx Aajxfka Nevori

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turrets: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8,000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6,400 [rpm] - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] Credeypxqrepfx Aavei - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total connected load: 28 [kW] WEIGHT AND DIMENSIONS - Footprint: 3,870 x 1,670 [mm] - Machine height: 2,500 [mm] - Machine weight: 6,000 [kg] MACHINE HOURS - Powered hours: 23,240 [h] - Operating hours: 19,500 [h] EQUIPMENT - Control: Traub TX 8i-p - 3-color status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Bar feeder interface

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2016, jam operasional: 90 h, Fungsionalitas: fungsi terbatas, jenis bahan bakar: diesel, daya: 44 kW (59,82 hp), daya nominal: 44 kW (59,82 hp), daya kontinu: 44 kW (59,82 hp), daya semu kontinu: 55 kVA, For sale: Diesel generator ETT-55E (55 kVA) Condition: Used. The cooling pump is not functioning; oil is entering the engine and the oil pump needs replacement. Otherwise, technically in good condition. Start-up is possible. New fuel pump included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous operation in industrial or construction environments. Technical specifications: Model: ETT-55E Operating hours: 90 h Power (Standby): 55 kVA / 44 kW Power (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Generator (alternator): WHI224D, brushless, with automatic voltage regulation (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Control and equipment: Crjdpsxlngasfx Aavsi Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switchboard – for mains/generator control Protection against overvoltage, overload, and low oil pressure Soundproof enclosure – reduced noise level Manual or automatic operation modes Application: The generator is suitable for: • Industrial enterprises, warehouses, and production facilities • Construction sites and mobile workstations • Backup power supply for hotels, hospitals, office buildings, or farms A reliable solution when a stable, uninterrupted power supply is required. If you have any further questions, we will be happy to assist.

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm Tool holder: SK40 Magazine positions: 30 pcs Crjdpfx Aaew Dud Sjvoi Table clamping surface: 630 mm Machine type: 5-axis CNC milling machine Manufacturer: DMG Model: DMU 60 P

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x320 mm Max. platen size: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 interface Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Cedpfx Aaek Rnq Nevori Pump/Motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 23.532 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 550 mm, daya motor spindle: 31.500 W, kecepatan spindel (maks.): 6.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 110 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 320 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: tiga fasa, torsi: 170 Nm, saluran batang: 65 mm, tinggi total: 2.490 mm, panjang total: 6.910 mm, diameter luar chuck: 160 mm, lebar total: 2.092 mm, Diameter batang (maks.): 65 mm, hidung spindel: 140, berat keseluruhan: 9.000 kg, gaya umpan sumbu X: 5.000 N, gaya umpan sumbu Y: 5.000 N, gaya makan sumbu Z: 5.000 N, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Dijual sebuah mesin bubut CNC INDEX C200, tahun pembuatan 2018, dari inventaris mesin kami sendiri. Mesin ini berfungsi penuh dan dapat diperiksa serta didemonstrasikan dalam kondisi beroperasi di lokasi kami. C200 dilengkapi dengan fitur lengkap yang meliputi spindel utama dan spindel kontra, tiga dudukan perkakas, serta perkakas yang digerakkan, dan sangat cocok untuk produksi massal yang efisien dari komponen bubut presisi yang kompleks. Data Teknis / Fitur: - Produsen: INDEX - Model: C200 - Tahun Pembuatan: 2018 - Pengontrol: INDEX C200-si berbasis Siemens Sinumerik 840D SolutionLine - Spindel Utama D65 - Spindel Kontra D65 - Diameter benda kerja: maks. 65 mm - Kecepatan spindel utama: maks. 6.000 RPM - Kecepatan spindel kontra: maks. 6.000 RPM - 3 dudukan perkakas - 14 stasiun per dudukan perkakas - Perkakas yang digerakkan - Sumbu Y pada dudukan perkakas 1 dan 2 - Sumbu C pada spindel utama dan spindel kontra - Sistem suplai pendingin bertekanan tinggi - Konveyor serpihan - Sistem pembuangan benda kerja / perangkat pengambilan portal - Antarmuka untuk magasin pemuat batang UNIMAG4 - Antarmuka pengguna iXpanel - Koneksi: 400 V / 50 Hz - Daya terukur: 54 kW - Daya sambungan: 65 kVA - Arus terukur: 94 A - Sekering maksimum: 100 A Fitur dengan tiga dudukan perkakas, spindel utama dan spindel kontra, serta teknologi otomatisasi dan periferal yang ada, memungkinkan pemrosesan lengkap yang fleksibel dan produktif dari komponen massal. Konfigurasi teknis didokumentasikan dalam konfirmasi pesanan INDEX asli. 20260930101605 Jam operasi saat ini menurut pengontrol mesin: - Waktu operasi: sekitar 23.532 jam - Sistem hidrolik: sekitar 22.288 jam - Waktu operasi spindel / penggerak menurut penghitung jam operasi: - S1: sekitar 2.298 jam Csdpez Hmxnefx Aaveri - S2: sekitar 4.189 jam - S3: sekitar 1.954 jam - S4: sekitar 5.998 jam - S5: sekitar 8.006 jam Saat ini, mesin tersebut berada di pabrik kami dan dapat diperiksa serta didemonstrasikan dalam kondisi beroperasi setelah perjanjian sebelumnya. Gambar detail tambahan, dokumen teknis, serta penawaran resmi dengan daftar fitur lengkap akan kami sediakan dengan senang hati jika ada minat yang konkret.

Kondisi: bekas, Detail Teknis: Berat badan benda kerja maksimum: 7000 kg Diameter benda kerja tanpa unit pemrosesan: 1870 mm Diameter benda kerja dengan unit pemrosesan: 1870 mm Jarak antara pusat bantalan: minimal 200 mm Berat rotor: 7000 kg Crjdpezuyd Nefx Aavji Diameter rotor: 1870 mm Diameter poros bantalan: 40 - 180 mm Pengendali: CAB 690 Tegangan: 380 V / 50 Hz Berat benda kerja 40 - 7000 kg Mesin dapat menahan beban berlebih hingga 9.000 kg pada beban simetris, yaitu maksimal 4.500 kg per penyangga bantalan. 1 x rangka mesin yang dapat dipisah, panjang 3,85 m + 2,0 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel Paths: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid Traverse: X, Y, Z: 30 m/min Feed Force: X, Y, Z: 3,700 N Resolution: X, Y, Z: 0.0001 mm Rotational Movement of the Motor Spindle – B Axis Rotational Range: -15 – 100° Rotational Range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. Speed: 20 rpm Drive Torque: 750 Nm Hydraulic Clamping: 50 bar Holding Torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100%: 10 kW Power at 25%: 15 kW Rated Torque: 100%: 8 Nm 25%: 12 Nm Speed Range: 50 – 30,000 rpm A Axis (Bar Capacity Ø 40 mm) Spindle Type: A4 Max. Bar Diameter: 40 mm Max. Speed: 35 rpm Drive Torque: Nominal: 112 Nm Max: 238 Nm Resolution: 0.0001° Axis Clamping (A Axis): Pressure: 70 bar Holding Torque: 130 Nm Tool Changer Number of Tool Disks: 2 Positions per Disk: 24 Max. Tool Weight: 1 kg Rotation Speed: 60 rpm Max. Tool Diameter (adjacent positions occupied): 50 mm Max. Tool Diameter (adjacent positions free): 63 mm Max. Tool Length (from spindle nose): 95 mm Secondary Slide Travel Path: 80 mm Feed Force: 1,700 N Tilting Moment: 90 Nm Resolution: 0.0001° Hydraulic Pressure for Tilting: 100 bar Workpiece Manipulator Pneumatic Vertical Slide Gate: Ø: 25 mm Stroke: 710 mm Linear Stroke per Motor Revolution: 70.4 mm/rev Max. Transfer Speed: 60 m/min Max. Workpiece Weight: 5 kg Max. Manipulator Stroke: 1,120 mm (2×560 mm) Max. Vertical Stroke: 150 mm Part Intake Ø / Length: Ø 32 mm / 100 mm Part Ejection Ø / Length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip Force: 45 N (at 6 bar) Max. Gripper Opening: 14 mm (2×7 mm) Pneumatic Equipment Operating Pressure: 6 bar Hydraulic System Operating Pressure: 95 – 105 bar Credswv Hnmopfx Aavei Coolant System Coolant Tank Volume: 80 liters Chip Tray Volume: 30 liters Kinematic Viscosity in Operation: 10 – 15 cST SCOPE OF SUPPLY Including, but not limited to: - Willemin Macodel W 408 B Machining Center - Extraction unit - Fire extinguishing system - Probe - Coolant system - Oil cooler - Data backup - Complete operating documentation - Exact scope of supply as per photo series No guarantee is given for the accuracy, completeness and timeliness of the information provided.