Röhm 20641 | KFM 130/2 Chuck Daya 130 MO KFM 2-Rahang | ZA110 PF003850

Röhm 130 MO

Kondisi: bekas, Tahun pembuatan: 1961, de2c1c73 Fpodpfswwl I Iox Adqjn

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm Fpedpfx Asw D Aq Tedqon various rollers as accessories

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Fjdpfeuz If Nsx Adqspn Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: baru, diameter ulir metrik (min.): 3 mm, diameter ulir metrik (maks.): 16 mm, berat keseluruhan: 500 kg, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.500 mm, panjang umpan sumbu Z: 200 mm, torsi: 24 Nm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 50 rpm, daya: 0,005 kW (0,01 hp), The CMA three-axis controlled thread tapping center is specifically designed for the post-processing of laser-cut sheet metal parts, as well as complete machining of, for example, small components and tubes. The machine offers the following machining capabilities: - Thread tapping - Drilling (standard / with chip break / tube cycle) - Countersinking - Flow drilling (with optimized feed curve) - Reaming - Simple graphical programming Fpjdpjrbz T Nefx Adqon - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to those by Demmeler and Siegmund welding tables) - Radial tool compensation with patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard configuration: Automatic tool changer with 10 positions, mounted on the gantry of the machine

Kondisi: baik (bekas), kedalaman pengeboran: 1.500 mm, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 1.300 mm, panjang umpan sumbu Z: 1.500 mm, Hersteller: TBT Tiefbohrtechnik Modell: BW 250-S Steuerung: SIEMENS 840D Baujahr: 2007 Bohren, Fräsen und Gewindeschneiden für Wärmetauscherböden und -platten Schwenkbare A-Achse: +25 bis -15 Grad Filtrations- und Kühlsystem: 1.000 Liter Späneförderer: 2.000 x 1.200 mm Auswurfhöhe Fräswerkzeug-Wechselsystem Tower Station mit 20 Werkzeugplätzen ELB-Bohrkapazität: 3 - 35 mm Fräskapazität: 250 cm³/Min Verfahrwege aller Achsen: 15.000 mm/Min (X-Y-W-Z) Maschine im Betrieb: ca. 15.000 Spindelstunden Umfangreiches Werkzeugpaket Technische Daten Max. Bohrdurchmesser (Stahl): 40 mm Bohrtiefe: 1.500 mm X-Achse: 2.000 mm Y-Achse: 1.300 mm Z-Achse: 1.500 mm W-Achse: 750 mm Tischbelastung: 15.000 kg Tischabmessung (L x B oder Durchmesser): 1.600 x 1.200 mm Spindelaufnahme: HSK 63 Mk Spindelleistung: 11 kW Drehzahl: 8.000 U/min Abmessungen (ca.): Länge: 7.200 mm Breite: 7.800 mm Fpsdpsv A Uw Dofx Adqsn Höhe: 4.250 mm Gewicht: 23.000 kg Bitte beachten Sie: Die Angaben auf dieser Seite wurden nach bestem Wissen und Gewissen von uns und, so weit möglich, vom Hersteller bezogen. Die Informationen werden in gutem Glauben bereitgestellt, jedoch kann für die Richtigkeit keine Gewähr übernommen werden. Eine vertragliche Zusicherung oder Garantie kann daraus nicht abgeleitet werden. Wir empfehlen Ihnen, alle wichtigen Details separat zu überprüfen.

Kondisi: baru, Bernardo TM 36 BLO/ R 1200 Electric Tapping Machine Technical Specifications Tapping capacity*: M5 – M36 Tool holder: GT 24 Fpsdpfxepag R Ro Adqsn Max. speed: 30 – 150 rpm Adjustable angle: 0° – 90° Max. working radius: R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power: 1200 W Voltage: 230 V Weight approx.: 35 kg * Material strength 400 N / mm2 Scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro-spray system - Air blowing device - Quick-change tool holder - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Features - Standard micro-spray system ensures constant cooling and minimal coolant consumption - Includes air blowing device for chip removal – optimum visibility of the drilled hole - Includes quick-change chucks for through and blind hole taps - Swivelling motor unit allows tapping at any desired angle between 0° and 90° - Higher precision compared to manual tapping – guarantees perpendicular (90°) threads - High productivity: significant time savings versus manual tapping - Quick-change chuck with integrated slip clutch prevents tap breakage - Includes pivoting arm with large radius for easy positioning of the tap on the workpiece - Suitable for tapping in steel, stainless steel, aluminium, and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series €830.00 plus 19% VAT.

Kondisi: hampir baru (bekas), Mesin Bor Lubang Dalam Ryazan Model PT295106 x 4000mm Produsen: Ryazan Fodpoxzp Rlsfx Adqepn Model: PT295106 Tahun: 1985 Kondisi: Bekas Nomor Stok: 2850 Tinggi Titik Tengah: 550mm Kapasitas Bor Padat: 200mm Panjang Maks Bor: 4000mm Headstock Spindle Berongga: 500mm Kecepatan Spindle Headstock: 16-250 rpm Daya Penggerak Headstock: 50/75kw Panjang Bor Maks di depan Headstock: 3500mm Panjang Bor Maks dengan spindle berongga 500mm: 4000mm

Kondisi: bekas, Tahun pembuatan: 1981, National 2-3 Hot Former Induktionsheizer, Zuführer, Richtmaschine Fpodpfx Adowl Iw Usqen

Kondisi: bekas, Tahun pembuatan: 1971, de-hu-001 Fodpfx Adeyt Rz Djqspn

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), 1 Fpedjxaphnjpfx Adqen