Memotong gergaji

Randek SP700

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Ffsdeh Ayyqopfx Abhju Complete line: 11.5 m Technical information subject to change.

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Ffodpfxed H Sc Es Abhju Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivel heads. Drilling heads on each side at the front included. Very good condition. Available immediately. Ffodpsd N Rb Dofx Abheu

Kondisi: bekas, Tahun pembuatan: 2010, Chalet construction machine Used, good condition, lightly used Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-approved Fjdsvwfqqspfx Abhefu up to 140 mm round log corner joints Sawing: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, sold as seen, without guarantee or warranty

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Fedjwtgcxepfx Abhjfu Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Kondisi: baru, Tahun pembuatan: 2026, Build size: 6 Nominal heat output: 170 kW -- Complies with 2nd BImSchV and CE -- Combustion chamber fully lined with fireclay For spaces up to: 4,800 m³ (according to DIN) Fuel types: Firewood, chipboard, wood chips, wood briquettes Fuel consumption: 40–50 kg/h Fan air volume, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Fjdpfxjdlhdbj Abhefu Flue gas outlet connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 Volt

Kondisi: baru, Tahun pembuatan: 2025, CHIPPER MACHINE, brand KÄLIN Hobeltechnik, model MPC-P: • Approximate production of wet shavings: 3,800 kg/h Fsdpfevk Saxex Abhsfu • Log carriage dimensions: 2,800mm x 1,100mm x 1,300mm • Maximum log length: 2,650mm • 2 symmetrical, removable cutter heads of 1,140mm each, divided into 3 sections of: - Diameter: 200mm - Length: 380mm - Number of knives: 8 - Cutter heads can be sharpened as a complete unit, without needing to remove the knives - ULTRA-FAST CUTTER HEAD CHANGE, less than 15 minutes! • 2 spare sets of cutter heads for replacement during the sharpening process • Cutter head motor power: 90kW / 120 HP • Carriage speed controlled by ELECTRONIC INVERTER: 0.6 to 36 m/min • Automatic control of the feed-to-load ratio • 1 feed drive motor, heavy-duty double chain drive: 15kW / 20 HP • Material level control system within the carriage to prevent running empty • Electrical cabinet and control panel with touch screen for function management • Lower motorized discharge conveyor for shavings: 5,000 mm x 800 mm • Weight: 11,000 kg • CE-compliant

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Ffjdpjurwy Asfx Abhou

Kondisi: sangat baik (bekas), Beam Cutting Center STROMAB CT800 Beam cutting center for large cross-sections, making it an optimal solution for carpentry and timber frame construction. Thanks to electronically controlled 5-axis technology, it fulfills all requirements for straight, inclined, and compound cuts. It guarantees maximum processing speed and finished product quality while reducing labor input and maximizing productivity. The CT800 can process beams of any length with cross-sections from 120×45 mm to 290×280 mm. The beam feed system features powered rubber wheels and pneumatically tilting top pressure rollers. Specification: - Motor power: 18 kW - TCT saw blade: 800 mm - Number of electronically controlled axes: 4 - Saw table rotation: 0° ÷ 340° - Table rotation speed from 0° to 340°: 18" - Blade tilt angle: 90° ÷ 45° - Positioning speed: 0 ÷ 17 m/min Cutting range: - At 90° with a single stroke: mm 280×290 / 250×390 / 200×450 - At 90° with table traverse and repeat cutting: mm 280×770 / 250×840 - At 45° with a single stroke: mm 200×210 Ffedpfx Abjwtw Avjhsu - At 45° with table traverse and repeat cutting: mm 200×760 - Maximum longitudinal cutting height: mm 300

Kondisi: belum diuji (bekas), Tahun pembuatan: 1991, Torwegge multi-blade saw Chain width: 250 mm Cutting height: 100 mm Ffjdpeucnukofx Abhju Total connected load: 39 kW