Set pengelasan

Red Rock Automation Ltd LPE0.25-0.5C-WD

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, gores kuas bulu: 35 mm, kecepatan spindle penggilingan: 1.670 rpm, berat keseluruhan: 4.000 kg,

Tahun pembuatan: 1992, Kondisi: baik (bekas), 21 leveling rollers, Ø 80 mm Knedpfxog Iirne Aahof Strip width: 500 - 1,650 mm Strip thickness: 1 - 5 mm

Kondisi: bekas, various types available Kedsdc A Sbepfx Aahonf

Kondisi: bekas, tinggi total: 1.700 mm, panjang total: 6.000 mm, lebar total: 1.700 mm, Empty weight: 6,500 kg Price: On request Metal Lathe Model: Conventional Kodpfx Aownhy Isahenf Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Centre distance: 4000 mm Centre height: 325 mm Swing diameter: 630 mm Spindle bore: 80 mm Spindle speed: 11.2-1800 rpm Machine dimensions: 6000 x 1700 x 1700 mm Machine weight: 6,500 kg - Documentation available: No - CE certificate available: No - Control: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Centre distance [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000 mm x 1700 mm x 1700 mm (L x W x H) - Transport weight [kg]: 6,500 kg Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Lukas van Rossum

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Knedpevx E Ncjfx Aahsf Immediately available from stock

Kondisi: bekas, Tahun pembuatan: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Kedpfx Asg Ip Efjahjnf Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Required space approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Knedpfxjxddvne Aahsf Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 1961, Hammer weight: 750 kg Ram stroke: 660 mm Blow rate: 100 /min Blow energy: 2040 kJ Distance from saddle base to lower edge of ram guide: 6600 mm Reach: 750 mm Steel forging - rectangular up to 240 mm Steel forging - diameter up to 270 mm Drive power: 75.0 kW Hammer weight: 16.5 t Anvil weight: 15.5 t Total weight: 32.0 t Space requirements (W x D x H): 3.2 x 1.45 x 3.45 m Knjdpfxsvuulle Aahef Forging hammer Operating mode: pneumatic Can only be offered in our warehouse without commissioning – video available from consignor prior to dismantling

Kondisi: baik (bekas), Tahun pembuatan: 1963, Vertical turning lathe Ksdevi Hryepfx Aahsnf Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5 - 180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further specifications, see data sheet. Machine documentation available. Machine dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Kondisi: bekas, Tahun pembuatan: 1995, diameter pembubutan di atas alas geser: 500 mm, Universal lathe Manufacturer: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Type: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions: L 2.7 x W 1.2 x H 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change tool holder Ksdpjwudhusfx Aahjnf • Rotating centre • Coolant pump • Machine lamp All details without guarantee. A demonstration under power is possible at any time in our showroom.