Perangkat pengatur suhu Regloplas P160

Regloplas P160/9/SG51/1K/RT45

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Lhsdpfx Alolz Rvlozjl Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Lhedpfjftm Hrex Alzol Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Peripheral devices Brand: Tool - Temp Lhjdpfsh Hbpwsx Alzol Type: TT - 157E Available: 14 units

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 50 rpm, For sale is a machining center of the brand Deckel Maho, model DMU 50 M, equipped with CNC control and manual rotary axes. The machine is in very good condition, fully functional, and immediately ready for operation. A special feature is the option to operate it in an open enclosure. Technical specifications: Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotary range: 360° (mechanical) Swivel range: +90/-15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request. Transport and loading can be arranged at extra cost, Europe-wide. Prices are subject to VAT. Inspection by appointment is possible. Contact us — our team is happy to assist you. Trade-in or exchange possible! Machine purchase and sales BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Lodpfsu Unh Iox Alzohl For more information or contact options, please visit our website.

Kondisi: bekas, Regoplas RT50 Термо-масляный терморегулятор Термо-масло до 300°C Lhedpfx Alsdmn E Hozel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x320 mm Max. platen size: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Lhsdpfx Ask Rnq Nelzjl Control system: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 interface Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/Motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Kondisi: bekas, Unit pendingin, pendingin air sirkulasi, pendingin air, chiller O. Hellwig Tahun pembuatan: sekitar 1995 Kapasitas pendinginan: sekitar 8 kW Daya nominal unit pendingin: 3 kW Refrigeran: R422D Kapasitas tangki air: sekitar 35 liter Kapasitas aliran pompa sirkulasi: 40 liter/menit Lsdpfx Ajpu R Ncolzehl Daya pompa: 0,63 kW Koneksi air: 1/2 inci Koneksi listrik: 380 Volt, 50 Hz - Pengaturan suhu melalui potensiometer putar Dimensi (P x L x T): 1100 x 750 x 140 mm Berat: 285 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 5.743 h, produsen pengendali: HEIDENHAIN, model controller: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-position tool changer. The working area measures 600 x 450 x 450 mm and supports a maximum workpiece weight of 500 kg. It is ideal for the precise machining of metals and alloys, offering a stable construction and efficient cooling system. Consider purchasing this MIKRON VCP 600 vertical machining center. Contact us for further information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle hours: 5,743 • Tool changer: 30 tools • Positioning accuracy: ±3 µm • HSK 63 tool holding system • Key features: • Versatile application: precise machining of various materials • High-performance spindle for fast, accurate processing • Stable, robust construction for high accuracy with heavy workpieces • Automation-ready: integrated functions for automated tool and workpiece changing • Efficient cooling system for optimized performance and tool life • Application: ideal for tool and mold making as well as the production of high-precision components across several industries Additional equipment Lodpox Imtyofx Alzohl • m&h 3D probe • Vice: not included

Kondisi: bekas, Tahun pembuatan: 2010, nomor mesin/kendaraan: AT91, Used CIP Tetra Pak, year of manufacture 2010, 15T/h This used CIP Tetra Pak, manufactured in 2010 with a capacity of 15 tons per hour, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning processes in bottling and food processing facilities. Consequently, this system ensures an effective hygiene cycle without the need to dismantle the production line, thereby optimizing downtime and reducing both water and cleaning agent consumption. Tetra Pak produced this used CIP system in 2010 with a throughput of 15 t/h. Its operational capacity of 15 tons per hour makes it suitable for high-output facilities while ensuring hygiene standards in compliance with food and beverage industry regulations. Technical features of the used CIP Tetra Pak, year 2010, 15T/h: The Tetra Alcip 1 executes a controlled wash cycle to remove organic and inorganic residues from production circuits. The system incorporates dedicated tanks for water, alkaline cleaning agents, and acid, and automatically regulates temperature, chemical concentration, and wash cycle duration according to plant requirements. This increases the efficiency of cleaning operations. Furthermore, the used CIP Tetra Pak, built in 2010, automates the cleaning process, reduces the risk of cross-contamination, and enhances production efficiency. The system allows operators to configure various wash parameters, enabling adaptation to specific production requirements and thorough cleaning of filling lines, piping, and heat exchangers. Safety and process control: The system features advanced safety mechanisms, including: - Sensors that continuously monitor cleaning agent concentration. - Temperature and pressure controls throughout the cleaning cycle for optimum performance. - Alarm systems that detect and manage sanitation anomalies, preventing potential failures. Lodpewga Iujfx Alzehl These features ensure reliable operation of the used CIP, minimize operational errors, and optimize water and chemical usage. The automated monitoring also increases safety and reduces maintenance requirements. Operational benefits: Using this used CIP Tetra Pak increases plant productivity in several ways. Primarily, it reduces downtime: the continuous washing system completes rapid cleaning cycles without the need for component disassembly. Additionally, it optimizes resource use: the automated dosing system prevents chemical wastage. The system also ensures regulatory compliance by maintaining high hygiene standards in line with industry requirements. The automated nature of this system helps manufacturers streamline their cleaning procedures, resulting in both improved production continuity and reduced operating costs. The system’s configurable cleaning parameters also allow for adaptation to specific production needs...

Tahun pembuatan: 2023, Kondisi: baru, lt-lv-ee-baltic-machine-offer Lhodpfxeiy N Npe Alzol