Mesin spotting

Reis Tus 130-200

Kondisi: baik (bekas), Tahun pembuatan: 1998, Manufacturer: REIS Model: TUS 130 - 200 Control: Siemens SIMATIC OP7 Year of manufacture: 1998 Kwedpou U Nb Ajfx Aglot Specifications Metric Distance between uprights: 1360 mm Installation height: 1700 mm Table length: 1600 mm Ram stroke: 1800 mm Approach speed: 200 mm/min Working speed: 50 mm/min Return speed: 180 mm/min Table travel: 1700 mm Dimensions (estimated) Length: 4900 mm Width: 2800 mm Height: 5600 mm Weight: 18,800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 550 mm, kecepatan spindel (maks.): 18.000 rpm, berat keseluruhan: 12.500 kg, Kami menawarkan Hermle C42U Dynamic dalam kondisi sangat baik dengan opsi berikut: Varian Dynamic dengan meja Ø800 x 630 Pendingin internal dengan filter sabuk kertas Heidenhain Touchprobe Blum Laser Kjdpfx Aeya I Dieglswt

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Kwsdpjgyd T Eefx Aglot Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Kwsdpfx Agjr A Hcbelst Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 11.832 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 500 mm, kecepatan rotasi (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 38, sudut putar sumbu A (min.): -139 °, sudut putar sumbu A (maks.): 91 °, sudut putar poros C (maks.): 360 °, TECHNICAL DETAILS Travel Paths X-Axis: 850 mm Travel Paths Y-Axis: 700 mm Travel Paths Z-Axis: 500 mm Control Type: Heidenhain TNC 640 Rapid Traverse Linear X-Y-Z: 35 - 35 - 35 m/min Acceleration Linear X-Y-Z: 6 m/s² Feed Force Linear X-Y-Z: 7,000 N Max. Throat Clearance: 625 mm Workpiece Dimensions Max. Diameter: Ø 650 mm Max. Height: 500 mm Interference Circle (A-Axis) at 0° Position: Ø 885 mm Spindle Data Speed: 15,000 rpm Power/Torque: 20% duty cycle, 20 kW / 173 Nm Tool Interface: SK 40 Tool Interface Type: SK 40 Magazine Slots: 38 Chip-to-Chip Time: approx. 6 s Max. Tool Length: 300 mm Tool Diameter with Adjacent Slot Occupied: Ø 80 mm Tool Diameter without Adjacent Slot Occupied: Ø 125 mm Max. Tool Weight: 8 kg Max. Magazine Loading: 152 kg Swivel Rotary Table Clamping Surface: Ø 650 x 540 mm Swivel Range: +91° / -139° C-Axis Drive Type: Worm Gear A-Axis Swivel Speed: 25 rpm C-Axis Rotational Speed: 30 rpm Table Load with Single-Sided Drive: 600 kg Accuracy to ISO 230-2 Deviation (A in X-Y-Z-Axis): ≤ 0.006 mm Cooling System (IKZ) Standard Tank Capacity: 122 l Coolant Tank Capacity: max. 570 l at 40 bar Ksdpevw Sdqofx Aglswt Pressure: max. 40 bar Flow Rate: 11/27 l/min Power Supply (IKZ): 400 V / 50/60 Hz Power Consumption (IKZ): up to 20 kVA Filters: Pre-filter, paper band filter Operating Pressure Hydraulic Pressure: 120 bar Compressed Air: 6 bar Lubrication System: Minimum quantity grease lubrication MACHINE DETAILS Control System Power-On Time: 20,178 h Machine Power-On Time: 19,094 h Spindle Running Time: 11,832 h Weight: approx. 9.5 t Power Supply Voltage: 400 V / 50/60 Hz Power Consumption: up to 30 kVA FEATURES - BLUM probe - BLUM laser tool measurement - Extendable chip drawer - Swivel rotary table - Chip rinsing gun - Emulsion mist extraction - Scraper belt conveyor - Blowing device - Blowing air through spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical thermal compensation by Heidenhain - Electrical hand-held operating module by Heidenhain.

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), A CNC universal milling and boring center from SHW is available. Travel range X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, spindle speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44,000kg. Documentation available. An on-site inspection is possible. Kedpfouh Aziox Aglewt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, TAKISAWA EX-122 MESIN BUBUT CNC Kategori: Pusat Pembubutan CNC Nomor Referensi: 311121 Kapasitas: Ø610 x 1524 mm Tahun Pembuatan: 2007 Spesifikasi Teknis: CNC Kontrol: Fanuc 21iT KAPASITAS KERJA Diameter Pembubutan Maks.: 610 mm Panjang Pembubutan Maks.: 1524 mm Diameter Swing: 910 mm Rel Pandu: Linear Motion (LM) REVOLVER Revolver: 10 Posisi EKOR MESIN Tailstock: MT5 SPINDEL Kwedpfox Ehhdex Aglet Kecepatan Putar Maksimal: 1200 RPM Hidung Spindel: A2-15 Lubang Spindel: 200 mm Jenis Spindel: Penggerak Roda Gigi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, doosan-puma-400lma-en-es Kwedpfxeyb Sqpo Aglot

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pemotongan: 560 mm, DOOSAN PUMA 400 LMB KONTROL FANUC 21i DIAMETER PEMBUBUTAN MAKS: 560 MM PANJANG KERJA MAKS: 2000 MM AYUNAN MAKS DI ATAS TEMPAT TIDUR: 770 MM AYUNAN DI ATAS PELANA: 590 MM Sumbu X, Z & C – 360 derajat, 0,001 derajat presisi Chuck hidrolik, diameter 380 mm Steady rest hidrolik (blok SMW) Lubang spindle: 132 mm Menara alat 12 posisi Konveyor serbuk logam Kedpfxsyciq As Aglswt Diameter quill: 120 mm Morse taper: 6 Perjalanan quill: 120 mm Kebutuhan daya: 60 KVA Dimensi lantai: 4220 x 2180 mm Berat: 10 ton