Van panel

Renault Master 170 Kühlkasten 230V Standkühlung

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Nsdpsgwbbqofx Abwewh Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Nwsdpsd Nt Rqsfx Abwoh Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Nedpfxodh Tfgo Abwowh Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Nwsdpfxjh Ryhne Abwsh Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: sangat baik (bekas), SINGLE-SIDE DESTACKING STATION - Upper crossbeam movable by 180° (horizontal) - Console table with vacuum clamps - Lift platform (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and control panel - External roller conveyor for the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belts for transfer at 90° of the sheets - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm 10 - 40 - Min. sheet dimensions mm 250 x 320 - Max. sheet dimensions mm 1200 x 3000 Nwedpfx Abod Tyvxswjh - Total connected load kW 11

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 Nwjdpfelikvhsx Abwsh X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: sangat baik (bekas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection: enclosure Lateral adjustment of aggregates carrier: manual Cam spacing (mm): 500 FORMATTING UNIT (per side): Pre-milling cutter AS 10 (5.8 kW) 2 x Hogging unit DT 10 (5.8 + 5.8 kW) Nwedshvahhopfx Abwoh Spraying unit (for liquid release agent) EDGE BANDING UNIT (per side): Edging unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°, pneumatic Multi-profile routing unit (CNC-controlled) RF 40 (1 kW x 2) 0 - 25° Multifunctional unit (radius and profile trimming) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool change (tools) 2 universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC-controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: baik (bekas), Here are your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used pallet rack beam from the manufacturer Redirack for purchase. Technical specifications for the pallet rack beam: Racking system: Redirack The scope of delivery includes: 01x Pallet rack beam, used Colour: orange Box profile: 160 x 50 mm Clear span: 3,610 mm Max. load capacity per pair of beams: 3,500 kg, with evenly distributed load 02x Locking pins, used Version: fully galvanized For securing the crossbeams against accidental lifting Our range of services: (Prices on request) Assembly and installation Nwsdpfxedyqg Ej Abwsh Please observe our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Kondisi: sangat baik (bekas), PC control Power Control Nsdpfxeivawps Abwewh Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 20

Kondisi: sangat baik (bekas), COMPLETE FOUR-SIDED PANEL PROCESSING AND EDGE-BANDING LINE, max. working width: 3,000 mm, equipped with automatic feeding and stacking system, comprising the following machines: X03001A) Feeding gantry (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Panel turning device (90° LONGITUDINAL–CROSSWISE) "RBO" Model GPK 1 X03001D) 2nd double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 2 - 11 X03001E) Panel turning device (90° CROSSWISE–LONGITUDINAL) "RBO" Model GPK 2 Nedpsi Rbg Tofx Abwowh X03001F) Stacking gantry (with 2 unloading stations) "RBO" Model Winner S 3200