Dua kali lipat. FORMAT MESIN PITA TEPI

HOMAG KFR 620 / 19 / QA / 25

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Nodpsiidm Nsfx Al Telh The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): Nlsdpfegwbbqex Al Teh No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), WEINIG window production line Nedpfjh H Iyxex Al Tjlh consists of: Unirex 3000 machining centre Univar 15 Unitex 15

Kondisi: baru, Tahun pembuatan: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Nlodpfx Aoi Hplkel Teh Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Nsdpfx Alei Hn Sre Telh Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Nlsdpfx Alsh Ryhne Tjh Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Nedpfxodh Tfge Al Telh Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Kondisi: bekas, Tahun pembuatan: 2014, berat benda kerja (maks.): 25.000 kg, panjang total: 10.000 mm, tinggi total: 6.000 mm, lebar total: 10.000 mm, berat keseluruhan: 60.000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 Mesin Bubut Vertikal CNC Modernisasi: sebagai bagian dari retrofit pada tahun 2014, menggunakan Siemens SINUMERIK 840D SL Area kerja: Diameter ayunan: 2.800 mm Diameter ayunan maks. / Diameter bubut: 3.000 mm Beban meja maks.: 25.000 kg Tinggi bubut maks.: sekitar 2.100 mm Jarak perjalanan sumbu X: ±1.550 mm Jarak perjalanan sumbu Z / Langkah kepala: 1.500 mm Penggerak utama dan spindel Penggerak utama: Motor utama Siemens Daya penggerak: 130 kW Kecepatan spindel maks.: 4.500 putaran/menit Jenis operasi: S6, 40% Peralatan: 2 spindel vertikal Pengganti alat dan periferal: - 2 pengganti alat otomatis - Sistem pendingin dan pelumasan - Pengangkut serpihan - Sistem penyedot kabut oli Nedpfszmkzpjx Al Tjlh - 2 unit hidrolik terpisah Jam operasi: sekitar 12.571 jam menurut penghitung jam operasi mekanis Diameter meja: 2.800 mm Pengendali: Siemens SINUMERIK 840D SL Berat komponen maks.: 25.000 kg Diameter ayunan: 3.000 mm Tinggi bubut maks.: 2.100 mm Berat sekitar: 60.000 kg Dimensi (P x L x T) sekitar: 10000 x 10000 x 6000 mm Tahun pembuatan: 2014 Kondisi: baik Syarat pembayaran: 100% uang muka sebelum pengiriman Syarat pengiriman: EXW dari pabrik Siap digunakan: Tidak

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), Automatic dual-table slot mortiser with oscillating tips BALESTRINI 2CAP Nlsdpfx Alogmucps Teh Maximum tenon length: 120 mm Maximum mortise depth: 80 mm Spindle speed: 9,000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Pneumatic workpiece clamp Overall dimensions: 1000 x 900 x 1250 mm Weight: 500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, length: 8750 mm, width: 5250 mm. Nlodsqvnl Tjpfx Al Tjh