Tekan hidrolik

Repkon Doppelständermaschine

Kondisi: siap digunakan (bekas), X/Y/Z/U/V travel: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Godpfx Adsuqackotebg

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 620 h,

Kondisi: bekas, HYDRAULIC PRESS CAMP 250 t Double-column press Gbsdpfx Aegr Ur Rodteg Piston stroke: 500 mm Table dimensions: 570 x 570 mm Distance from table to piston: 600 mm Distance between columns: 570 mm Approach speed: 95 mm/s Working speed: 7.5 mm/s Return speed: 135 mm/s Motor power: 30 HP

Kondisi: bekas, Tahun pembuatan: 2003, Die-sinking EDM machines Travel range X: 350 mm Gbedpfxovyzf Nj Adteg Travel range Y: 250 mm Travel range Z: 300 mm Table size X: 500 mm Table size Y: 400 mm Max. workpiece size X: 780 mm Max. workpiece size Y: 530 mm Max. workpiece size Z: 300 mm Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Electrode changer: 4-position Generator: 64 amps Lowerable tank Control: Charmilles

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Gbjdpfxeph Uk No Adtjg Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: baru, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end bearing Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2,150 kg Gbjdpfx Adoiffwqetjg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on a yield strength of 250 N/mm² Material: (ST 37 - ST 42 construction steel)

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Side walkways Godpetiwgijfx Adtjbg Floor-level installation

Kondisi: bekas, Tahun pembuatan: 2001, Sheet width 3200 mm Sheet thickness 3.0 mm (mild steel) Sheet thickness (stainless steel) 2.0 mm Opening width / Upper beam 300 mm Upper beam speed 40.0 mm/sec Bending beam adjustment 80.0 mm Working height 900 mm Bending beam speed 90.0 degrees/sec Control MULTIBEND 5000 Backgauge - adjustable 10 - 1550 mm Accuracy +/- 0.1 mm Air pressure 5.0 bar Operating hours approx. 1,000 h Total power requirement 2x 4.0 kW Voltage 400 V Weight 4400 kg Dimensions (L-W-H) 4295 x 2225 x 1775 mm Original price approx. €85,000 Machine with only approx. 1,000 operating hours (!!) Good condition (!!) Gedpfx Aoxabz Todtebg Special price on request - Inspected condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility for bending cassettes, boxes, and profiles ! High flexibility in workpiece design ! High productivity and throughput ! Easy to operate Equipment: - motor-driven universal folding machine "RAS 73.30" * high-precision mechanics with advanced control technology * suitable for both single-piece and series production * robust high-speed model with rapid axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * Material and tool library * Swiveling - front right * 1x emergency stop button - CNC electric-motor adjustment of upper beam * Fast closing and opening speeds * Programmable opening and closing heights * Radius bending without special tools (multiple bends) * Rigid upper beam for straight bent parts * 1x set RAS segmented upper tooling .. height 80 mm * RAS "Click-In" tool clamping system (pneumatic) - CNC electric-motor bending beam adjustment * Fast swiveling motion: short production times * Crowning system compensates for deformation due to bending forces * 1x set RAS segmented bending tools - CNC electric-motor backgauge * Fast positioning, repeatable accuracy * Support plates hold the sheet weight * Support plates made of stainless steel with ball rollers - 2x movable double foot switches - 1x RAS tool trolley for bending tools (mobile) - Operating manual (PDF) + original circuit diagram

Tahun pembuatan: 1981, Kondisi: bekas, Translation: Pressing force: 40 t Upright spacing: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Gbodpob U Hw Tjfx Adtsg Installation height: 360 mm Ram bore: 40 H 7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Hydraulic cushion pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid advance speed: 240 mm/s, steplessly adjustable

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Gbedpfx Aow Au H Rsdteg Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Pre-fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully functional, very good condition. Dismantled and stored, immediately available.