Bangunan komersial 22x70 + 23x20 m

Resteel

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with crank: yes Nwjdpfx Aeizkhvohwsc Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Kondisi: baru, Step-by-Step Painting Systems Elboy Industrial Solutions designs and manufactures a broad range of paint shops tailored to your products. With ELBOY, you can use virtual reality during the design phase to navigate through your facility, allowing you to implement desired modifications at this early stage and avoid unexpected outcomes later on. Nedpfx Asdy Dw Aohwowc We provide engineering and manufacturing services for your application, with particular emphasis on environmental protection and occupational safety across processes such as sandblasting, filling, washing, priming, and top-coating for all product sizes. Step by Step systems are available with overhead conveyors or floor conveyors and can be configured to accommodate products of any size. Booths for sandblasting, chemical washing, pre-coating, drying, filling, top-coating, and curing can all be integrated into the system. To carry out the processes specified by the system in sequential steps, automatic doors open upon completion of each process, and the product automatically advances to the next processing station. These fully automated systems are operated via a 15-inch touchscreen and offer various reporting options, such as main computer monitoring, product reporting, outcome reporting as required, and remote control. These are paint shops that are engineered and manufactured by our specialists according to your capacity, operational requirements, and other specifications. For requirements such as electrostatic powder coating, wet coating, sandblasting, painting, coating, washing, and similar systems, maximum efficiency is achieved with minimal staffing and optimal use of space.

Kondisi: bekas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Nwsdev Uq Tlepfx Ahwec Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)

Kondisi: baru, Tahun pembuatan: 2025, The SQUALO 515 single-shaft multi-blade or multi-rip circular saw, in the LM version, is distinguished by its advanced mobile blade system. The machine is equipped with motorized feed rollers on the worktable and top motorized pressure rollers, ensuring effective all-wheel drive for precise and consistent material transport. In the LM (Mobile Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three mobile blades. These mobile blades can be dynamically positioned to accommodate various trimming and multiple cutting requirements. Nsdpfx Ahehpbxijwewc A distinctive feature of this model is the possibility to expand its cutting capacity: by using special spacers, the number of blades used simultaneously can be increased up to six. It is important to note that the blades mounted on these special spacers operate at a predetermined fixed distance, allowing for the efficient production of components with standardized widths. This versatility enables the machine to seamlessly switch from operations requiring flexible blade positioning to serial production with fixed cutting intervals.

Kondisi: bekas, omga-t55-300-2009 Nwedexvh E Ropfx Ahwoc

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Nodpjxnlgcjfx Ahwswc Location: Garbsen

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Max. cutting width: 310 mm, chain width: 340 mm, engine power: 30 kW Nwsdpfxswyagds Ahwec

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin Nedpowvqklsfx Ahwswc • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baru, A two-zone container, divided into a paint booth and a preparation area - External dimensions: 6058 x 2438 x 2591 mm - Internal dimensions: 5538 x 2170 x 2485 mm - Shipping container: 20DV - Door: integrated into the cabin door - Window: with metal security grille - Lighting: 4 LED lamps - No assembly required – ready for immediate use Control – automatic via external central control unit Power supply – 380 V Delivery includes: - Fan – 3 kW - Airflow velocity – 0.7 m/s - Air flow rate: 9,500 m³/h - Recirculation – closed loop system Heating: - Riello 40G20 oil burner - Heat-up time: 10–15 min - Maximum temperature: 800°C Filters – pre-filter, paint stop filter, cardboard filter, activated carbon filter Safety features: Nodponbd Nbjfx Ahwowc - Emergency stop - Pressure lock on the door - Temperature monitoring system - Fault indicator Equipment: - 16A socket outlet - Air preparation unit - Pneumatic hose reel

Kondisi: bekas, Tahun pembuatan: 2006, lebar total: 4.600 mm, tinggi total: 1.830 mm, Dimensions (L x W x H): 217 x 460 x 183 cm Price: On request - Year of manufacture: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs]: 4 - Spindle 1: - Spindle diameter [mm]: 40 - Spindle 2: - Spindle diameter [mm]: 40 - Spindle 3: Nedjwnig Njpfx Ahwjwc - Spindle diameter [mm]: 40 - Spindle 4: - Spindle diameter [mm]: 40 - Infeed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Extraction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170 mm x 4600 mm x 1830 mm (L x W x H) - Transport packages [pcs]: 1 Financial information VAT: The indicated price is excluding VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial items Yorick Diebels