Mesin uji tarik-mesin uji universal

Richard Hess MBV GmbH H3000-H5000TM mit Langwegextensometer

Kondisi: sangat baik (bekas), We are offering you a Zwick / Roell universal testing machine (tabletop tensile testing machine). Zwick / Roell materials testing machine Model: BDO-FB0.5TH - Load testing in tensile/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Test area width: unlimited - Test area depth: 100 mm - Max travel without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection for operation: COM 1 - Power supply: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Cgsdod Sr S Ijpfx Abhen We are happy to answer further questions by phone.

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), A 3-axis precision milling machine DMG Mori is available. Travel range X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An inspection on site is possible. Cgjdpfx Abevi N D Sehen

Tahun pembuatan: 2022, jam operasional: 10 h, Kondisi: baru, Universal testing machine H5TMC Mechanical construction: according to DIN EN ISO 7500-1 2 backlash-free ball screw drives, driven by AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 test area up to rated load: Test area width: 420 mm (optional widening: +190 mm / +330 mm / +620 mm) Max. test stroke without test tools, adapters, and load cell: 1025 mm (optional extensions: +250 mm / +500 mm) Optional: Conversion to floor-standing model, required additional component: base table Travel speeds: Testing speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Csdpfjiq Hw Ujx Abhegn Force measurement: Measurement range: within 0.4 - 100% of the rated load, class 1 (optional class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If, at the customer’s request, a factory or DKD calibration is to be performed at the installation location, this will be charged separately. Crosshead position measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position Resolution of the crosshead position measurement:

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: Cedpfjd Rzc Rox Abhegn vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs (

Tahun pembuatan: 1999, Kondisi: bekas, Used Entex Extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Csdpfx Absbqt Arshsgn We can also offer you an Entex PL WE 70!

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the Cedpou Uvalsfx Abhjgn permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Tahun pembuatan: 2018, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead Travel: 520 mm Working Depth: 66 mm Overall Height: 1010 mm Weight: 45 kg Test Speed: 1 to 500 mm/min Return Speed: 500 mm/min Travel Resolution: 0.01 mm We offer a wide selection of grips: screw clamps, wedge grips, pneumatic and hydraulic grips. Compression plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on extensometers, climate chambers. Load cells selectable in 50N, 100N, 200N, 500N, 1000N, 2000N or 3000N versions. Includes Hess software for Windows 8, 9, 10, or 11 for universal testing procedures, simple testing also possible without a PC, and one 5kN SP 56g screw grip with pyramid or rubber jaws 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring devices. Calibration for both tensile and compression modes in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust aluminum and stainless-steel (V2A) frame equipped with recirculating ball screws, linear ball bearings, and belt drive. The bellows cover protects spindle and guides. The testing machine is microprocessor-controlled and equipped with a membrane keypad. The two-line LCD display shows force and travel values. The machine can be operated as a standalone unit or connected to a PC via USB interface. Travel is measured by an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001 mm). The machine comes with a standard load cell: 0.03% linearity and corresponding calibration. An optional second channel allows for an additional load cell or displacement transducer. The universal testing machine is available with two different travel distances: 500 mm or 1200 mm (with load cell, without test fixtures). Scope of delivery: One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N or 3000N), certificate, 220V power cable, USB cable, user manual, and CE declaration of conformity. Load Cell 3000N Measuring Range: 1-3000N (tension and compression), with nominal 2mV/V output signal Overload Protection: +/-100%, Linearity: +/-0.05%, Hysteresis: +/-0.03%, Repeatability: +/-0.02%, Cgjdpfjt Rg H Asx Abhjn including 1.5 m connection cable and calibration certificate.

Kondisi: baru, PUSAT PEMROSESAN 3-SUMBU BARU DARI PABRIK HEIDENHAIN TNC 7 kontrol jalur digital Layar TFT HEIDENHAIN 16" Paket HEIDENHAIN (motor, sistem pengukuran, dan handwheel) Csdshy Atfepfx Abhegn Sumbu-X: 1.430 mm Sumbu-Y: 670 mm Sumbu-Z: 640 mm Ukuran meja: 1.500 x 620 mm Kapasitas beban meja: 1.200 kg Kecepatan spindle: 10.000 rpm (pendingin oli) Taper spindle: SK 40-BIG PLUS (BVD 40) Daya motor spindle maksimum: 32 kW IKZ – pendingin internal – 20 bar Kecepatan rapid: 30.000 mm/menit Akurasi posisi: ± 0,005 mm Akurasi pengulangan: ± 0,003 mm Penukar alat WZW: 30 slot (opsional hingga 60 slot) Konveyor serbuk serpihan rantai engsel Persiapan sumbu ke-4 (meja putar) Rumah pelindung penuh Hanya pertanyaan dari Jerman yang akan dijawab.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, tahun perombakan terakhir: 2004, it-hu-01 Cjdpfx Asg Ryqkebhjgn

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/refurbishment: HILGERS/TEICHMANN Conversion/refurbishment: 2000/2023 Cgsdpsqfc Egsfx Abhon Crane equipped with: - Double-rail trolley with 4-corner wire rope system - Magnet system prepared - Radio remote control - Optional with magnet beam or spreader