Mesin penggilingan rotor

RICHARDON R 400 CNC R

Tahun pembuatan: 2021, Kondisi: baru, Type: gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace capacity: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Ijdpfx Aaog E S Inehetr Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7

Kondisi: baik (bekas), Tahun pembuatan: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control system: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Drilling range: 1 – 10 mm Process: Single-lip drill Drilling depth: Plunging spindle: 110 mm Sealing housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Frequency: 100 – 800 Hz Itodpfx Ajvcbg Soahjr Weight: Approx. 2.6 t We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Kondisi: baik (bekas), Tahun pembuatan: 1987, jam operasional: 2.685 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 240 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 400 mm, panjang total: 5.235 mm, tinggi total: 3.045 mm, lebar total: 3.990 mm, kecepatan spindel (maks.): 640 rpm, kecepatan spindel (min.): 55 rpm, berat keseluruhan: 11.000 kg, Perlengkapan: dokumentasi / manual, Gear hobbing machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Iedpfx Asw Dcx Rjahetr Fully functional machine, which underwent a general overhaul just a few years ago. Investments made: - Overhaul including milling head (2021): approx. €70,000 - All hydraulic hoses replaced (2021): approx. €3,500 - New oil mist separator (2021): approx. €5,000 Many tools and clamping devices available, see pictures and attachments.

Kondisi: bekas, Tahun pembuatan: 2015, TAKISAWA TS4000YS vuodelta 2015 CNC-ohjaus FANUC 32i-MODEL B Itjdpfx Aswq Sf Teahsr

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), A complete filling, sealing, inspection, and labeling line is available, comprising the following equipment: (1) Tray denesting unit by Carsoe, year of manufacture 2013; (2) Volumetric filler Lieder/Robot Food Technologies AWF 2, year of manufacture 2015, with a lifting and tipping device for feeding, suitable for free-flowing, non-sticky products with low liquid content; (3) Tray sealer Multivac T700, year of manufacture 2012, suitable for sealing preformed trays, bowls, and cups, capable of vacuumizing, gas flushing, and sealing; (4) Lidding machine Buhmann Servolid 400, year of manufacture 2012; (5) Labeler Multivac MR300/400, year of manufacture 2012, equipped with two integrated Videojet TTO printers, suitable for top and bottom labeling of trays; (6) Metal detector Mesutronic, with automatic rejection of defective packs; (7) Tray packer Somic 424DT, year of manufacture 2013, throughput capacity: 15 cartons/minute; (8) Nordson hot-melt system, tray marking printer by REA Jet at the machine outfeed, regularly maintained, including documentation and spare parts. Iedsi Atnxjpfx Aahotr

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.150 mm, berat keseluruhan: 12.000 kg, diameter bor: 32 mm, Heidenhain iTNC530 CNC control system 12-position tool changer Technical data / details: Travels: X-axis (table, longitudinal): 1800 mm Z-axis (column, cross): 1700 mm W-axis (drilling unit, cross): 1150 mm Y-axis (drilling unit, vertical): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25 to +15° Itodowcldaepfx Aahsr Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, see photos.

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Iedpfx Aasixntwehetr Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Tahun pembuatan: 2012, Kondisi: bekas, jenis bahan bakar: listrik, Load capacity: 2,500 kg Lift height: 3,700 mm Fork length: 900 mm Isdpfefibh Rex Aahotr Tyre type: Super elastic Battery year: 2013 Overall height: 2,630 mm Machine weight: approx. ... t Compact forklift Duplex mast / Full free lift

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm Itsdpfx Aasd Nb A Njher - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process Itedeul Efmopfx Aahsr - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data