Pusat mesin

Robland BM 3000

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Axle 920 mm X-axis 3000 mm Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: X = 300 mm Y = 120 mm Z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X-direction Maximum groove depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Bedpsfmdcqsfx Af Sslc Required extraction capacity: 2300 m³/h Location: arriving in stock 54634 Bitburg - immediately available -

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, MCS Jigger high-temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Completely refurbished in 2002. Pressure: 3 kg/cm² Capacity: 9,170 l Roll width: 2,000 mm Fabric diameter: 1,100 mm Roller diameter: 324 mm Blodpfefqmx Tex Af Soc Additives tank.

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm • X-axis support: 3000 mm • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h Bjdpfxed Hz Nis Af Sslc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 30 mm, jarak pergerakan sumbu X: 3.000 mm, diameter lubang: 35 mm, sudut putar sumbu A (maks.): 360 °, DETAIL TEKNIS Sumbu X: 3.000 mm Sumbu A: 360 derajat Kecepatan pemajuan: 20 m/menit Ketebalan material Z: 12 mm - 30 mm Bjdpfsxnyk Asx Af Sjlc Diameter lubang maksimum: 35 mm Diameter lubang minimum: 3 mm Kedalaman maksimum dengan mata gergaji: 10 mm Dimensi pelat Dimensi pelat minimum X: 300 mm Dimensi pelat minimum Y: 120 mm Dimensi pelat minimum Z: 12 mm DETAIL MESIN Daya motor: 0,75 HP Tegangan operasional: 400 V Kapasitas hisap yang dibutuhkan: 2.300 m³/jam PERLENGKAPAN Chuck bor posisi 4 Mata gergaji

Kondisi: bekas, Tahun pembuatan: 2021, Technical Specification (English): Travel paths (X, Y, Z): 4,062, 2,922, 660 mm Number of spindles, vertical drilling head: 13 pcs. Number of spindles, horizontal drilling head: 6 pcs. Number of tools: 27 pcs. Number of milling units: 1 pc. Working area: 3,200 x 1,500 x 200 mm Motor power: 12 kW Control system: BECKHOFF MASTERWOOD Project 385 (Winner) --- Exhibition machine, year of manufacture 2021, immediately available, with new machine warranty from the manufacturer! 5-axis CNC machining center in gantry design for use in interior fittings, doors, staircases; optionally expandable with solid wood clamp for frame machining and arched windows Brief summary: --- Working area: X = 3,200 mm; Y = 1,500 mm; Z = 200 mm 1 high-performance 5-axis spindle, 12 kW, with HSK 63 F interface 1 fixed drilling head with 19 spindles with 7 individually selectable vertical drill spindles X direction with 6 individually selectable vertical drill spindles Y direction with 2 double horizontal drill spindles X direction and 1 double horizontal drill spindle in Y direction Saw unit integrated in drilling head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm spacing Linear 5-position tool magazine for large tool diameters Original SCHMALZ vacuum table (tubeless) Console table with 6 traverses Workpiece lifting device Automatic tool length measurement device 12 original Schmalz vacuum cups 114 x 140 mm, height = 125 mm 1 Becker vacuum pump, 100 m³/h 1 chip conveyor Construction software Masterwork: 2D Wop for standard applications: panel processing/interior fittings, arched elements, doors Master 3D Level 2: for more complex processing, Bodpfxoxmk Ate Af Solc optionally also upgradable for fully interpolating 5-axis operations Prepared for use of solid wood clamps (arched elements), clamps available as option if required later Technical data as per attached, detailed description --- Total price for this configuration ex stock Oberkochen: on request! --- Freight and commissioning upon request! Options for frame production/arched elements with additional charges: --- Reference ring for mounting chip guide elements on 5-axis electrospindles with HSK 63F interface: €410.00 Basic kit for clamping arched elements – 6 pneumatic clamps with two movements for arched elements: €7,090.00 (technical details according to manufacturer - no guarantee!) Chip guide elements, price per piece: €460.00 All prices quoted are net, plus VAT. (technical data as provided by manufacturer - no guarantee!)

Kondisi: baru, Tahun pembuatan: 2024, Y-axis drilling: 920 mm Y-axis sawing: 860 mm X-axis: 3000 mm Z-axis: 12 mm - 40 mm A-axis: 360° Min. panel dimensions: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed rate: 20 m/min Bedpel D Rw Eofx Af Selc Drill diameters: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm Min. hole diameter: 3 mm Max. hole diameter: 35 mm Motor power: 1.3 kW Weight: 500 kg

Kondisi: belum diuji (bekas), Max. milling length: 400 mm Max. milling width: 150 mm Max. clamping thickness: 25 mm Hydraulic motor: 2.2 kW Bljdpjk Tyrwjfx Af Sec 2 milling motors, each: 2.2 kW Milling motor speed: 12,000 rpm Frequency converter: 8 kVA, 200 Hz Weight approx.: 1,200 kg Output approx. 200 - 600 pcs/h depending on shape and size

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Bjdpfx Afjcnw U Do Selc Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Bjdpfx Aev Rpxlef Sslc Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Bedpfxogwt S Te Af Sjlc Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH