Metalldrehmaschine

Rogi WM460Ax1000

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm Fsdpfx Aowrm Dtonlegg >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: baik (bekas), Tahun pembuatan: 1998, panjang ulir: 65 mm, de-to-hu+it+lt_001 Fedpfx Aox H Rmuenlsgg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Working tank dimensions (W×D): 850 × 610 mm X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: 150 mm V-axis travel: 150 mm Taper angle (on workpiece, thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Maximum wire feed speed: 420 mm/s Fgodpfxoyu Nqmj Anlsg Wire tension: 3 – 23 N Machining method: Flushing / Immersion Distance from floor to table top: 995 mm Wire spool weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Installation space (W×D): 3,350 × 3,850 mm Machine weight (incl. power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power consumption: 3-phase, 50/60 Hz, 13 kVA External dimensions of dielectric tank (W×D): 700 × 2,155 mm Weight of dielectric tank (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 interchangeable paper filters (internal pressure type) Deioniser: Ion exchange resin (Type 18 L)

Kondisi: baik (bekas), Tahun pembuatan: 1980, diameter pembubutan di atas alas geser: 1.040 mm, diameter pembubutan di atas carriage atas: 710 mm, panjang pembubutan: 2.000 mm, lebar tempat tidur: 600 mm, HU-20240620-001 Fgjdjx Tgr Tspfx Anlog

Kondisi: baru, Tahun pembuatan: 2024, Neue Maschine Umlaufdurchmesser über Bett: 500 mm Umlaufdurchmesser über Support: 270 mm Umlaufdurchmesser im Bettbereich/Ausnehmung: 700 mm Bettbreite: 340 mm Spitzenweite: 1500 mm Spitzenhöhe: 250 mm Drehzahlbereich: 22 – 2000 min⁻¹ Fjdpfx Answu Du Ielogg Hauptspindelaufnahme: Bajonett 6 Spindelbohrung: 52 mm Inklusive: 3-Backenfutter, 4-Backenfutter, Schnellwechsel-Stahlhalter mit 4 Einsätzen, Schnellvorschub, Kühlmitteleinrichtung, 2-Achsen-Digitalanzeige, feste Lünette, Mitlaufende Lünette, Wechselräder-Satz und Bedienungsanleitung

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, nomor mesin/kendaraan: 30216 & 30277, panjang pemakanan sumbu X: 1.000 mm, jarak pergerakan sumbu X: 1.000 mm, Mesin Frais Universal Merek: MAHO Model: MH 1000 Tersedia 2 unit! Pergerakan x: 1000 mm Pemegang alat: SK 40 Tampilan digital. Kepala dapat diputar +/- . Meja dapat dimiringkan dan diputar +/- . Gerakan pinol. - Indikator digital 3 sumbu - Meja universal 1.250 x 740 mm (alur-T 16 mm) - Kepala milling vertikal SK 40 dengan ulir penarik S 20 x 2 - 6 langkah otomatis pinol 0,02/0,03/0,05/0,08/0,12/0,20 mm/putaran - Pelumasan sentral, manual Fgsdpfx Ajp S Schsnlsg Mesin dapat dilihat langsung. Siap pakai segera Termasuk pemuatan bebas, transportasi tidak masalah.

Kondisi: baru, en-GB Cutting diameter: 355 mm Saw band dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20–80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Fgsdpfomhm Aqsx Anljg Cutting capacity at 60° square: 180 mm Connected load: 400 V Total power requirement: 2.2 kW Machine weight approx.: 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Semi-automatic mitre band saw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vice with quick-release mechanism - Band tension control via manometer - Electric automatic coolant system

Kondisi: bekas, CNC-TOK-4601250 Fedpfx Asxwp Ebsnljgg

Kondisi: bekas, Tahun pembuatan: 2001, en Fgedpfx Ansvf I Dieljg

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Fgjdpfow D Aq Tox Anljg Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories