Tungku bubuk, tungku industri

ROMER Piece SW

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel The large color touch panel is aesthetically designed and offers comfortable, intuitive operation. All key parameters can be set directly on the panel. Memory for 20 programs with 10 events each Up to 20 programs can be stored, each with up to 10 successive time/temperature events arranged in the heating curve. This is particularly essential for more demanding processes. Kfodpjfy T Sdefx Aahja Gas / oil consumption data Consumption is calculated based on the burner settings. With this feature, you can estimate the cost of a particular cycle, plan consumption, and supervise personnel. Two-channel recorder with USB cycle parameters Every furnace is equipped with a recorder that logs all ignition parameters—including two temperature channels—onto a USB stick, functioning similarly to an aircraft black box. The system also enables analysis of monthly/daily reports, including media consumption and performance. Every heating start that opens the door can be retrospectively created even years later. No other manufacturer offers such a dedicated feature. This system was programmed entirely in-house by our developers. Automatic flue gas extractor The chimney can be programmed to open several minutes before the end of the combustion process to vent the chamber. It can be remotely controlled from the control panel and does not require mechanical intervention as with most conventional setups. Countdown to cycle end Once the cycle has started, how much longer will it take? By calculating the heating dynamics, the system determines and displays the remaining duration of the cycle. Easy door operation To open, simply pull the door. The latch features adjustable pressure on the door. To close, just press the door closed—the latch engages and automatically pulls the door shut. To minimize heat loss to the workshop when opening the door, a hood is installed above the door to deflect some of the heat away. The MTS system was developed to provide precise temperature readings from within the furnace chamber.

Kondisi: baru, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangular 1250x600 mm Cutting range at 45 degrees: round 680 mm Ksdpfx Aaefg E Hnohsfa Cutting range at 45 degrees: square 600 mm Cutting range at 45 degrees: flat 870x600 mm Cutting range at 60 degrees: round 580/550 mm Cutting range at 60 degrees: square 530/450 mm Cutting range at 60 degrees: flat 550x450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter bandsaw for fast cutting with pusher system P15. Optionally P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved by the new "B&S positioning system". An intelligent NC control ensures smooth interaction between the linear encoder and the self-braking positioning motor, in combination with a reliable hydraulic brake via large radial center positioning. The worktable is supported by high-quality preloaded bearings, enabling very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided gripper positioning system The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper claws" which are hydraulically controlled. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is separately constructed and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust geared motor.

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel The large color touch panel is aesthetically pleasing and offers comfortable, intuitive operation. All key parameters can be set directly via the panel. Memory for 20 programs with 10 events each It is possible to store up to 20 programs and activate up to 10 sequential time-temperature events arranged along the heating curve. This feature is particularly required for more demanding processes. Kedpfxofzb Nbe Aahjfa Gas/Oil Consumption Data Consumption is calculated based on burner settings. This function enables you to estimate the operating costs of a specific cycle, plan resource usage, and monitor personnel efficiency. Dual-Channel Recorder With USB Cycle Parameters Each furnace is equipped with a recorder that logs all firing parameters, including two temperature channels—similar to an aircraft black box—onto a USB stick. The system also supports analysis of daily/monthly reports, including media consumption and performance metrics. Every heating cycle that initiates with door opening is documented as a new event. Such a dedicated option is not available from any other manufacturer. This system was custom-developed from scratch by our programmers. Automatic Smoke Extraction Flue The chimney can be programmed to open a few minutes before the firing process ends to aerate the chamber, which is particularly important for more demanding processes. The extraction process can be remotely controlled via the control panel and does not require manual mechanical operation like with most constructions. Minute-by-Minute Completion Forecast After the cycle has started, how long until it finishes? By calculating the heating dynamics, the system continuously updates and displays the remaining time until completion. Easy Door Operation To open, simply pull the door. The lock features an adjustable pressure against the door. To close, just push— the lock will catch and automatically retract the door. To minimize heat loss in the workshop when the door is open, a hood above the door redirects some of the warm air. The MTS system has been developed to accurately read the true chamber temperature. Standard measurements, often based on a single temperature sensor, can be inaccurate. MTS is a multi-sensor system positioned at the most remote points in the chamber. The multi-zone heating system ensures a previously unmatched firing quality.

Tahun pembuatan: 2020, Kondisi: baru, Semi-automatic carton former - Starbox 65 - Connecting roller conveyor Robotape-Starbox 65 - 4 swivel castors with brake Sample photos – machine is still in its original packaging Kjdpfef Evh Tox Aahsfa

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half-treated water station is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchange column operating in the sodium cycle, - Strongly basic anion exchange column operating in the chloride cycle, - Carbon filter Kodpfx Aofz Naksahefa Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Columns are made of AISI316L stainless steel.

Tahun pembuatan: 2000, Kondisi: Pembawa suku cadang rusak (bekas), I am selling spare parts for a Trumpf TC 600L. - Ram control (new/used) - Die holder - Punch holder Kfjdpfoffyg Hjx Aahja - Drive motors This is only a small selection of what I have available. Please simply inquire about any parts you need.

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Kodpfx Aaofw Ah Rjhsfa Stroke length/stroke time (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6 clamping slots Main axis speed: approx. 2.0 rpm (other speeds on request) Main axis torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Professional packaging machine from a renowned European manufacturer, suitable for adhesive tape widths up to 50 mm. Maximum carton dimensions approximately: width 500 mm x height 500 mm; length unlimited. -No adjustments necessary for different carton formats. -Double-sided sealing, top and bottom. -Side drive conveyor. -Pressing pressure for automatic width and height adjustment is continuously adjustable. Kedpfx Asgvzrgoahofa -Working height of the machine is adjustable. -Capacity approx. 800 cartons per hour. -Conveying speed approx. 20 m/min. -400 V / 50 Hz. The machine can be demonstrated under power.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Kodpjfz U S Eofx Aahsfa Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: baru, en1 Ksdpfjggx E Dex Aahefa