ProfiCenter (CP02)

ROMER-profesjonalne centrum proszkowe CP-02

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard Knodefz U Nujpfx Anksc • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), de_hu_001 Kodpfx Ansza E S Dsksnc

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Kedsfz U Sajpfx Ankenc Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg Kedpfx Anjfz U Swjkonc • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Pressure: 60.0 t Bending length: 1270 mm Frame width: 1000 mm Throat depth: 410 mm Ram speed: 160 mm/sec Working speed: 10.0 mm/sec Return speed: 165 mm/sec Stroke: 275 mm Installation height: 530 mm Table height: 900 mm Table width: 90.0 mm Kodpsxabt Asfx Ankjnc Back gauge (adjustable): max. 800 mm Oil capacity: 150 l Operating voltage: 400 V Motor power: 7.5 kW Weight: 4320 kg Dimensions (LxWxH): 2250 x 1960 x 2750 mm Demonstration / demo machine (!!) From our showroom (like NEW) With very few operating hours The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine available in a range of bending lengths from 1,270 mm up to 6,000 mm. It offers a wide selection of pressing forces from 40–400 tons to meet your specific needs. This CNC-controlled press brake can also be extended as a tandem machine, providing you with significant flexibility in terms of bending length. It features numerous functions to ensure simple and safe operation. The robust machine design, in combination with precise CNC control, ensures long-lasting, reliable performance. In addition, the machine offers a variety of upgrade and configuration options to tailor it to your requirements. The DELEM DA CNC graphical control system allows convenient operation via touchscreen and comes with a comprehensive safety package. The machine is operated easily via an LCD touchscreen mounted on the left swivel arm. Bending processes are initiated by actuating a foot switch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a rear light curtain. The CNC control of the press brake automatically calculates press force, bending tolerance, crowning setting, coining force, and tool safety zones. ----- POWER BEND PRO CNC Press Brake Special Equipment: * "ERGO" version – operator knee clearance * Flexible articulated arm mount for the control unit * Increased installation height * Extended cylinder stroke * Increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" color TFT high-resolution display * Bending sequence calculation * Product programming and true-to-size representation * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back gauge * Back gauge with R-axis, on ball screw spindles * Travel ranges: X = 800 mm // R = 250 mm * Travel speed X axis: 230 mm/s * With 2 manually adjustable stop fingers - ROLLERI gooseneck upper tool "PS 135.85-R08", system "A" * Including quick-change clamping * Including crowning device in tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1 die shoe "C 1050-R" - Rear safety device: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electric components - FIESSLER AKAS laser safety device...

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container Knodpfxjfz U Rrj Anksc • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h Kjdpfx Aefz U Rcjnksnc • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Kondisi: baru, Tahun pembuatan: 2025, de Knedpfx Aog I H Iksnkjc

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, gaya penekanan: 100 t, panjang langkah: 300 mm, kecepatan operasi: 75 mm/dtk, kecepatan mundur: 75 mm/dtk, panjang meja: 3.060 mm, tinggi meja: 930 mm, panjang total: 4.350 mm, lebar total: 1.820 mm, tinggi total: 2.680 mm, berat keseluruhan: 7.500 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, A unique opportunity for those seeking a premium CNC press brake, available for immediate delivery. We offer a SafanDarley E-Brake 100-3100, a 100% electric machine, BRAND NEW, installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production: the very few working hours are exclusively related to demo activities. Key features: • Showroom-condition new machine • Never used in production • Ready for immediate delivery • Highly energy-efficient electric technology • High bending accuracy and repeatability • Lower operating and maintenance costs compared to traditional hydraulic press brakes Machine configuration: • EC20 Touch graphical touchscreen control with 2D bending simulator and automatic bending sequence calculation • Independently driven motorized Z1+Z2 axes • Extra Z0+Z3 backgauge fingers • Wila upper beam with hydraulic clamping • Wila lower beam with mechanical clamping and bar set for Schiavi-type dies • Movable aluminum front supports • Integrated safety light curtains • 590 mm daylight / 300 mm stroke Ksdpfezcmabsx Anksnc • Industry 4.0 interface The machine is offered for sale exclusively due to the renewal of our exhibition area and the replacement of the current showroom model.

Tahun pembuatan: 2005, jam operasional: 14.300 h, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.270 mm, produsen pengendali: AMADA, model controller: AMNC-F (FANUC 180i-PB), berat keseluruhan: 18.000 kg, tinggi total: 2.318 mm, gaya punching: 20 t, panjang produk (maks.): 5.526 mm, ketebalan lembaran (maks.): 3 mm, lebar meja: 5.120 mm, jumlah sumbu: 5, This 5-axis AMADA EM 2510NT turret punching machine was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine offers a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking for a high-quality punching machine, consider the AMADA EM 2510NT we have available for sale. Please contact us for further details. Knsdpfx Ajy S A Tkjnkjc • Rapid traverse X-axis: 100 m/min • Rapid traverse Y-axis: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN • Hits per minute—1 mm pitch (5 mm stroke): 780 hits/minute • Hits per minute—25.4 mm pitch, X-axis: 500 hits/minute • Hits per minute—25.4 mm pitch, Y-axis: 330 hits/minute • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption—machine: 250 l/min • Air consumption—air jet vacuum: 250 l/min • Operating air pressure: 5 bar • Tooling as visible in the photos included • 4 tool cabinets • Technical documentation (manual scan) • Machine plus supplied tooling package as shown in the photos • Machine fully functional: Yes (replacement of a pneumatic hose required to fix a minor air leak) • Machine connected to power supply: Yes