Beli Romer-Profesjonalne Centrum Proszkowe Cp-02 bekas (8.850)

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box Crsdpfofz U Nusx Anzsg • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor Codpfx Anefz U Saezorg • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste Credpfofz U Swjx Anzog • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard Crodpfx Ajfz Dknenzjg • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Cedpfx Anjfz U Rcozsrg Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes Crjdpfofz U Rrsx Anzsg • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Credpfxofz Dkgj Anzeg Description: • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recovery with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refilling with paint from cardboard • Paint level sensor in refill box • An acoustic alarm warns the operator when the cardboard paint supply is low • The center is connected to the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application Credpfx Ajfz Dt Njnzsg The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. Crsdpfx Anjfz Dubozeg - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. Codpefz Nb Tofx Anzsrg - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. Csdjfz U S Ejpfx Anzjrg The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Crodpfxsfz I Edj Anzsg Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Dirancang khusus untuk usaha kecil dan pelapis velg. Sistem lengkap, terdiri dari: Oven pelapis bubuk, lebar x tinggi x kedalaman 1200 x 1600 x 1200 mm, 15 KW Kabinet pelapis bubuk, lebar x tinggi x kedalaman 2000 x 2240 x 920 Pistol pelapis bubuk terbaru dari seri ROMER ProfiSpray Credpfx Aeg Ngt Njnzog Semuanya dijual dengan harga 17.990,00 (belum termasuk pajak), ditambah biaya pengiriman dan pemasangan.

Kondisi: bekas, 1-clamp perfect binder - CP Bourg BB-3002 EVA Year: 2008 - Serial no.: 61300520 Counter: 118,615 Spine Gluing: Hotmelt Crjdpfxoipaqyj Anzeg Side Gluing: Hotmelt Milling Section with Extraction Adjustable Milling Depth Technical specifications: - Sheet size: min. 100 x 201 mm – max. 385 x 750 mm - Cover size: min. 100 x 201 mm – max. 385 x 750 mm - Book thickness: min. 1 mm – max. 60 mm - Cover weight: 80 – 300 gsm - Maximum cover pile height: 80 mm - Max. production speed: 650 cycles/h - Dimensions: 2,020 x 2,400 x 1,500 mm Online video inspection possible via Skype We would be pleased to welcome you – more machines available in stock Available immediately – Inspection possible Located in stock at Emskirchen / Nuremberg – Test possible

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Model MAS-30-2 Working Area (WxDxH): 1200 x 1800 x 300 mm Drive: Electric Rated Power: 21 kW Rated Voltage: 380 V Frequency: 50-60 Hz Number of Nozzles: 250 pcs. Pump Capacity: 1200 L/min Mixing cleaning agents not possible – separate nozzles Nozzle Type: Chemically neutral Operating Temperature: 20 - 60°C Number of Cleaning Phases: 2 Tank Capacity: approx. 1200 L Filtration: Yes Manufacturer's Warranty: 12 months Credpscubgpjfx Anzjg

Tahun pembuatan: 2022, Kondisi: baru, Service – Preparation of an Offer for a Powder Coating System from Romer. Direct from the manufacturer romer-germany Manufacturer of powder coating systems and industrial ovens, plant engineering Cedpfxefnk H Se Anzorg Delivery time approx. 10 to 16 weeks Shipping costs to be calculated separately.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KAP1, kebutuhan udara: 16.000 m³/jam, daya: 36 kW (48,95 hp), kapasitas hisap: 16.000 m³/jam, Perlengkapan: kabin, Dielektrische automatische Pulverbeschichtungsanlage KAP1 Preis: 492.693,30 PLN + MwSt. Elektrische und Energiedaten • Spannung: 400 V (3P + N + PE) • Anschlussleistung: 36,34 kW • Pneumatikanschluss: 1" • Luftdruck: mind. 6 bar • Luftqualität: Öl < 0,1 mg/m³, Wasserdampf < 1,3 g/m³ • Luftverbrauch: 1.710 Nl/min (Betrieb) • Kompressor: SC-30 • Lufttank: 1.800 L Lackierparameter • Beschichtungsgeschwindigkeit: 1.933 mm/min • Bauteilmaße: 800 x 1.800 mm • Aufhängehöhe: 500 mm • Schichtstärke: 100 µm • Pistolenanordnung: vertikal Technische Daten und Ausstattung • Ausführung: dielektrischer Kunststoff • Durchgangsmaße: 1.000 x 2.400 mm • Luftdurchsatz: 12.348–16.000 m³/h • Pulverzentrum: ProfiCenter CP02 • Manipulatoren: 2 Stk. • Pistolen: 8 automatisch, 2 manuell (ProfiSpray) • Werkstückerkennung: ja (Höhe, Breite) • Systeme: Zyklonabscheider, ProfiControl, Traversenzug • ATEX: Zone 22, II 3D Plattformen und Kabinenkörper • Plattformen: Ein- und Auslauf, Edelstahlboden, rutschhemmende Treppen • Verkleidung: dielektrischer Kunststoff, LED-Beleuchtung, Aussparungen für Manipulatoren Cjdov Rpx Sepfx Anzjrg Luftmesser und Absaugkanal • Automatische Bodenreinigung • Absaugkanal mit pneumatischer Klappe Pistolenabblasung und Steuerung • Automatisches Pistolenabblasen • 10" Touchpanel, 50 Programme, Manipulatorsteuerung, Absauganlage, Fahrgeschwindigkeit X-Achse und Werkstück-Zug • Automatische Pistolenpositionierung • Werkstück-Zug: Geschwindigkeit 570–2.830 mm/min, 2 Zugvorrichtungen Die Maschine beinhaltet außerdem: • ProfiSpray A Applikator • PSS-1 Steuergerät • PM-1 Pistolen • ProfiCenter CP-02 Pulverzentrum • CK-D1400L Zyklon-Absauganlage • MA1-180 Manipulator und MX1-10 X-Achse • OZ-12H Absauganlage • ProfiControl 10" Steuerung • BP-H2000 W900 Werkstück-Messsystem

Tahun pembuatan: 2026, Kondisi: baru, powder-coating-booth-kph-de Cjdpfx Aefz Atbjnzorg

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Portables 7-sumbu sistem pengukuran koordinat ROMER Infinite 1.0 SC 5028SC. Rentang pengukuran diameter: 2800mm, akurasi pengulangan titik: sekitar +/-0,045mm - 0,050mm, ketidakpastian pengukuran panjang volumetrik: sekitar +/-0,064mm - 0,075mm, komunikasi nirkabel: Wi-Fi 802.11b/g, operasi baterai, basis perangkat lunak: driver WinRDS kompatibel dengan solusi perangkat lunak pengukuran PolyWorks, PC-DMIS, PowerInspect, Metrolog. Termasuk penyeimbang terintegrasi, kotak transportasi, set probe 6mm, 15mm & ujung, pelat pemasangan dengan 3 magnet, batang kalibrasi dengan sertifikat kalibrasi. Inspeksi dapat dilakukan dengan perjanjian. Crjdpfx Asyk Hcrenzsg

Kondisi: siap digunakan (bekas), Indramat CPUB 02-01-FW 261366 Serial Interface, key switch defective—see photo. Serial number as per photo. Used, normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Crsdpfxei Ebb Re Anzeg

Kondisi: siap digunakan (bekas), Bosch CNC CP / MEM 5 / G107 / 913572 modul CPU, SN:001028510, bekas, terdapat tanda-tanda pemakaian normal, 100% berfungsi, lingkup pengiriman sesuai foto. Crodpfx Asx Eqxbonzog

Kondisi: siap digunakan (bekas), Siemens 6ES7614-1AH01-0AB3-Z Simatic CPU614 E, version 02, used, normal signs of wear, 100% functional Csdpfx Aji Edu Donzerg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7525SE-0949-FA, rentang pengukuran sumbu X: 2.600 mm, jumlah sumbu: 7, RINCIAN TEKNIS Sumbu: 7 Rentang pengukuran: 2,6 m Akurasi Suhu saat pengujian: 20 °C Kelembapan udara saat pengujian: 50 % Deviasi titik tunggal yang diizinkan: 0,028 mm Deviasi titik tunggal yang terdeteksi: 0,010 mm Deviasi panjang volumetrik maksimum yang diizinkan: ± 0,039 mm Deviasi panjang volumetrik yang terdeteksi: -0,018 mm Pemindai Produsen: Hexagon Model: CMS108 Integrasi: Terkalibrasi di lengan pengukuran Catatan: Dapat digunakan pada lengan pengukuran dengan perangkat lunak pemindaian yang sesuai Catatan: Perangkat lunak pemindaian tidak termasuk dalam cakupan pengiriman RINCIAN MESIN Desain: Sistem pengukuran portabel Berat sistem pengukuran termasuk kotak transportasi: sekitar 40 kg Dimensi luar kotak transportasi lengan pengukuran: sekitar 1.350 x 550 x 350 mm Dimensi tripod: sekitar 750 x 750 x 750 mm Berat tripod: sekitar 75 kg Dimensi kotak pemindai: sekitar 600 x 450 x 220 mm Berat pemindai termasuk kotak pembawa: sekitar 6 kg Ukuran laptop: 17 inci Catatan: Lengan pengukuran diberi label ulang sebelum kalibrasi terakhir PERLENGKAPAN - Lengan pengukuran Hexagon ROMER Absolute Arm RA-7525SE, 7 sumbu - Mobility Pack FP2-1503-FA dengan koneksi nirkabel ke komputer - Kotak transportasi untuk lengan pengukuran - Kaki magnet - Bilah pengujian, panjang 700 mm - Bola pengujian, diameter 25 mm - Kotak probe dengan 3 probe - Probe dengan bola rubi, diameter 6 mm - Probe dengan bola rubi, diameter 3 mm - Bola kalibrasi, diameter 15 mm - Penutup pelindung debu - Set kabel lengkap - Sertifikat kalibrasi lengan pengukuran, laptop Dell M6600 - Perangkat lunak PowerInspect 11 termasuk kunci perangkat keras (hardware dongle) - Perangkat lunak Hexagon-RDS - Tripod bergulir Brunson 231, tinggi dapat disesuaikan - Rentang penyesuaian tinggi tripod: sekitar 700 hingga 1.100 mm - Pemindai Hexagon CMS108 - Kotak pembawa untuk pemindai - Sertifikat kalibrasi pemindai Catatan: PowerInspect 11 hanya untuk pengukuran taktil, tidak dapat dipasangkan dengan pemindai Catatan untuk permintaan pengemasan: €250, palet khusus dengan konstruksi karton dan tripod di atas palet Eropa Codpfx Ajzv Rhujnzsrg

Kondisi: siap digunakan (bekas), Okuma DC Power Supply 6 Axes PCB with E4809-436-002-A, used, normal signs of wear, 100% functional Cedpfx Aji Ecakonzsrg

Tahun pembuatan: 2020, Kondisi: bekas, nomor mesin/kendaraan: E22SJ20072839180, iCombiPro adalah model kompor kombi terbaru dari RATIONAL. Model iCombiPro 20-2/1 elektrik dengan 20 rak GN 2/1 atau 40 rak GN 1/1 mudah dioperasikan bahkan oleh staf yang tidak terlatih, karena Anda dapat mencapai kualitas hidangan yang luar biasa tanpa perlu pengawasan yang konstan. Sistem pembersihan cepat dan otomatis menjaga peralatan Anda tetap bersih. Kompor kombi ini telah diperbaiki sepenuhnya di bengkel khusus kami dan berfungsi penuh/bebas dari kekurangan, serta dilengkapi dengan garansi 6 bulan untuk semua komponen elektrik. iCombi Pro hanya digunakan selama 5834 jam operasi! Daya tersedia: sekitar 37 kW Harga daftar produsen: 30.739,49 € (netto) = 36.580 € (bruto) Silakan tanyakan harga terbaik. Ini adalah foto contoh dari model serupa dalam kondisi penggunaan yang sebanding. Foto asli akan segera diunggah. Layanan peralatan kami untuk Anda: Garansi 6 bulan untuk suku cadang elektrik, terbatas pada penggantian suku cadang yang rusak, tanpa biaya pemasangan dan pembongkaran. Peralatan bermerek berkualitas tinggi dengan harga yang wajar. Konsultasi profesional dan kompeten - sebelum dan sesudah pembelian. Pengiriman atau pengambilan sendiri dapat dipilih secara fleksibel. Penyediaan panduan pengguna, diagram instalasi & suku cadang. Program aksesori lengkap dengan harga menarik. Kondisi: bekas, diperiksa, berfungsi penuh Spesifikasi teknis: L x P x T: 1082 x 1117 x 1872 mm Ukuran minimum bukaan pintu untuk transportasi: L x T: 1200x1900mm Nomor seri: E22SJ20072839180 Tahun pembuatan: 07/2020 Kapasitas pengisian maksimum / rak: 5 kg Kapasitas pengisian total maksimum: 100 kg Berat peralatan elektrik: 325 kg Kondisi koneksi elektrik: Tegangan 3 NAC 400 V Daya koneksi elektrik: 67,9 kW Daya operasi uap: 54 kW Daya operasi udara panas: 66 kW Sekering: 100 A Kondisi koneksi air: Saluran masuk air (selang bertekanan): 3/4 inci Saluran keluar air: DN 50 Informasi tambahan: Rentang suhu: 30°C hingga 300°C Mendeteksi kondisi ruang memasak saat ini Mengenali ukuran, jumlah pengisian, dan kondisi produk serta menghitung tingkat pencoklatan yang sesuai Csdpfx Aszwu U Isnzerg Mempelajari kebiasaan memasak yang sering digunakan dan menerapkannya Menentukan jalur memasak yang ideal untuk mencapai hasil yang diinginkan MyDisplay - tampilan operasi yang dapat disesuaikan dan spesifik pengguna Layar warna TFT dan layar sentuh Panduan penggunaan dan pengoperasian dapat diakses di layar perangkat Sensor suhu inti dengan koreksi kesalahan otomatis saat terjadi kesalahan dan bantuan pemosisian Pintu kabinet berkaca, hemat energi Lampu interior LED Termasuk indikator konsumsi energi Regulasi kelembapan: pengukuran dan pengaturan kelembapan yang akurat Pemrograman individual minimal 350 program memasak dengan hingga 12 langkah Pengaturan penyemprotan dalam 3 tingkat Antarmuka USB Generator uap berkinerja tinggi dengan pengapuran otomatis 5 kecepatan kipas yang dapat diprogram Sistem pemisah lemak terintegrasi dan bebas perawatan tanpa filter lemak tambahan Fungsi pendinginan cepat: pendinginan cepat ruang memasak Penyesuaian otomatis terhadap lokasi pemasangan (ketinggian, iklim, dll.) Pintu perangkat dengan kaca berlapis tiga yang berventilasi dan kaca interior yang dapat diputar Koneksi permanen air limbah diperbolehkan sesuai SVGW Perlindungan terhadap percikan dan semprotan air IP X 5 Katup solenoid terpisah untuk air lunak dan air hangat hingga +30°C Pemilihan waktu mulai otomatis dengan tanggal dan waktu yang dapat diatur Material interior dan eksterior dari baja t