Mesin penghancur dua poros

RS TeamTech Sp. z o.o. RS 1200F

Kondisi: baru, Tahun pembuatan: 2025, Features: - Overbelt neodymium magnetic separator - HP - Dust suppression - Belt speed control Fpedpfxjw Elbdo Am Sjh - Self-propelled drive, semi-trailer

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Fedpfxsu Nlkxs Am Seph

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25-029, lebar total: 800 mm, panjang total: 4.700 mm, tinggi total: 1.900 mm, jenis arus masuk: tiga fasa, konsumsi energi: 2 kWh, Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Capable of separating all metals from approx. 1 mm grain size. Suitable for material with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, available for inspection and testing. Camera option available on request! If the machine is too small, we also build larger versions. This is our demonstration unit. Maximum throughput depends on material and purpose. Fedpfxeqabm Ee Am Soph Price negotiable!

Kondisi: bekas, Tahun pembuatan: 2023, Generator Gas Nitrogen PSA NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Fpodex U Tgmspfx Am Soh Tahun pembuatan: 2023 Unit tampak seperti baru. Hanya beroperasi dalam waktu singkat.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Fpodpfxevf E Avo Am Soh Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Tahun pembuatan: 2010, Kondisi: baik (bekas), 2 SICON shredders Year: 2010 Missing electrical cabinet Price: €15,000 each 4 densimetric tables: €8,000 each Fpodoiz Tm Ijpfx Am Sjh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), jenis bahan bakar: listrik, berat kosong: 4.200 kg, Tahun pembuatan: 2024, filling hopper with discharge chute hopper capacity 10.5 m³ S355 / St52-3 Fpjdpfeuqynmjx Am Seh vibrating chute with 10mm Hardox 450 wear plate chute fully stress-relieved annealed 2 x unbalanced motors 2.5 kW each NEW

Kondisi: siap digunakan (bekas), Number of knives: 6, rotor diameter: 350 mm, motor power: 50 kW, steel/welded frame construction in reinforced design with documentation, inspection possible, year of manufacture unknown, completely overhauled in 2022. Fpodpsn Tpmusfx Am Sjh

Kondisi: baru, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Rotor swing diameter: 580 mm each Fsdpfobq St Hex Am Sjph Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen basket locking for contaminant discharge Weight: approx. 18,500 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Infeed: 1,000 x 350 mm, max. feed piece size: 320 x 320 mm, 45 kW electric motor, crusher weight: approx. 13.3 t, incl. steel subframe Fpodpfx Aowb Dfgjm Sjh