Penegakan kembali Screw Driver

RYKO GmbH SE5-S

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Hjdjkfp D Topfx Ad Rsr Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted.

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Hjdowwlk Nspfx Ad Rsr

Tahun pembuatan: 2026, Kondisi: baru, Image 1: 10-ton machine jack with multi-position adjustable lifting claw, integrated hydraulic unit, external hydraulic connection, and low dead weight. Hsdpfx Aegi Dkced Rer Other images: Additional HTS ECO-Jack S-Series machine jacks – German quality workshop tool – NEW – in various load capacities from 3 to 25 tons, with integrated 520 bar hydraulics, rotatable pump lever, swiveling base plates, and adjustable lifting claw. External pump connection from 10-ton load capacity, dual pump from 15-ton load capacity. Please inquire about load capacities and other versions up to 50 tons. Delivery usually from stock.

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected Hsdod Rg Dpepfx Ad Rer No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Kondisi: baru, nomor mesin/kendaraan: 0770, berat kosong: 2.800 kg, berat muatan maksimum: 20.000 kg, berat keseluruhan: 22.800 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 6.000 mm, lebar ruang muat: 2.000 mm, tinggi ruang muatan: 640 mm, ukuran ban: 450x300x305, kondisi ban: 100 persen, Tahun pembuatan: 2026, berat operasi: 22.800 kg, tpw20-alas-2025 Hodohbh Rtspfx Ad Rjr

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Cutting Center ESA-9 comprising: Infeed: - Stable aluminum construction using proven profile design - Ergonomically adjustable working height from 985–1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit up to 6,500 mm available) - Material feed via chain conveyor for automatic loading across 9 compartments - Working direction from left to right Profi Cutting Saw: - Automatic bandsaw with pneumatic clamping system (3 clamping elements) - Infinitely variable saw feed speed via hydraulic unit - Workflow controlled by Exenso control system - Saw area secured at the front by a safety light curtain - Saw band operation: 1.5 kW, frequency-controlled - Saw band dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in standard operation 15–110 m/min - Cutting area width 10–120 mm, height 10–80 mm Outfeed: - Stable aluminum construction using proven profile design - Ergonomic retrieval height of 760–820 mm (Note: not separately adjustable from working height) - Outfeed of parts via powered roller conveyor with steel rollers - Roller-guided ejection unit over three levels to inclined removal table - Maximum part length via automatic outfeed: 3,500 mm (optionally available extension kit for working length up to 4,500 mm) - Waste removal via ejection unit – maximum length 600 mm - Waste falls via chute into customer-provided waste container (Note: container not included) - Off-cut identification at positioning station for manual handling by operator Software / Data Interface: - HECHT Software Exenso ESA (version provided after joint pre-acceptance) Mode of Operation: - Reinforcement bars are placed by operator onto the loading magazine of the infeed section as specified/displayed. - Transmission of data via integrated data interface from customer-side window manufacturing software of required PVC cut-to-lengths - Steel is fed in and transported automatically - Optimized cutting to the specified lengths - Transport of steel to retrieval position in the outfeed - Optional double-cut operation after verification Scope of Delivery: - Bandsaw - Infeed section Hedpoxft I Aofx Ad Rsr - Outfeed section - Light curtain - Control system with Windows 10 and 15" touch screen - REST API data interface can be adapted to existing cutting centers upon review. - The unit will be disassembled into several packages for transport incl. 540.1082 1 pc Safety Fence Wall-Mounting Kit with Door Switch ESA/SSA, usable left or right 723.5011 1 pc Bandsaw Blade M42 3320x27x0.9 12–16 teeth, fine 942.5541 1 pc Minimum Quantity Lubrication for ESA & SSA Saw Systems, noticeably increases blade lifespan Includes: minimum lubricating nozzle, 1L lubricant, lubricant holder, filter for contamination protection 829.0201 1 pc Buffer Monitor for Steel Terminal ESA/SSA, additional screen

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Pneumatic punch Hedpfx Adjff Apwo Rer

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Manufacturer: STAHL CraneSystems Model: SH6063-12 4/1 L3 Year of manufacture: 2003 Load capacity approx.: 25,000 kg Lifting height approx.: 10,000 mm Span approx.: 2,800 mm Classification (FEM/ISO): 1Am/M4 Operating speeds: Hoist: approx. 0.5 / 3.1 m/min Trolley travel: approx. 1.0 / 20.0 m/min Utilisation certificate: Remaining service life of approx. 80% certified by an authorised inspector Hsdpfskn Snrjx Ad Rer Equipped with: - Underslung hook block - Two hoisting speeds - Motorised trolley

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor bantalan sudut dan olive untuk pengeboran elemen jendela yang presisi dan efisien. Gambaran singkat: • Tidak ada waktu pengaturan ulang antara pengeboran bantalan sudut dan pengeboran olive • Keunggulan pengeboran dari bawah • Paket aksesori untuk pengeboran bantalan sudut Hjdpodx R Hzjfx Ad Rsr • Pola lubang sesuai pabrikan (misal: G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... dan lainnya) • Paket aksesori untuk pengeboran olive • Gearbox bor presisi yang kokoh dari GANNOMAT

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, - Alat Ø 500 mm Hodpjx N R H Tsfx Ad Rjr - Kecepatan putaran pisau 2800 rpm - Berat sekitar 1500 kg