Alat pengatur suhu oli, 250°C

S.I.S.E 250H18 DC76

Kondisi: bekas, Regoplas RT50 Термо-масляный терморегулятор Термо-масло до 300°C Laodsdmn E Hopfx Aahok

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Strip width: max. 1,050 mm Lasdpfs A Dimjx Aahok Strip thickness: 10 - 20 µm

Kondisi: baru, Tahun pembuatan: 2025, General: - Maximum temperature range: 150°C for oil (heat carrier fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump Lajdpfx Aasddv Itshek - Qmax. 60 l/min – Pmax. 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level indicator - Indirect cooling system (shell and tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and control system: - Electronic PCB control - Solid state relay - Safety thermostat - Sensor breakage monitoring - Connection cable with plug Available in approx. 4 weeks!

Kondisi: sangat baik (bekas), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Lasdpjhh H Hisfx Aahjk Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3000 W Heat compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1280 mm x Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10.5 kW Nominal current: 22 A Circuit protection (on-site): 32 A slow-blow Sound level at 1m distance (free field measurement): < 69 dB(A) Side port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your safety as a buyer, please note the following information! The following steps are carried out on all our listed chambers in advance: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data and information!) We would be happy to answer further questions by phone.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Temperaturregler Single Temperiertechnik STW 1-6-30-M4. 4 Stück verfügbar. 1 Stück/300 EUR. Guter, funktionsfähiger Zustand. Bitte sehen Sie sich auch unsere anderen Angebote an. Laodpfxowf Anhj Aahok

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), 1 x oil cooling unit Deryun DJ 3 RSA02-CE-400V Year of manufacture: 2008 Lajdpfxjkhim Eo Aahsk In very good condition. The oil cooler can be inspected.

Kondisi: siap digunakan (bekas), dehydraulische Presse, Vierständerpresse, Eitel 100T Hersteller: EITEL Presskraft: 100 Tonnen Gesamtmaße: 1900x1100x3300 mm Tischgröße: 1050x800 mm Ljdpsuhl E Refx Aahsak Hub: 400 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2019, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19101105, lebar rol: 1.100 mm, Perlengkapan: Pelat tipe tersedia, riwayat servis lengkap, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine designed for both cold and hot lamination. It is intended for single-sided film lamination of paper, with the laminated web subsequently rewound onto a roll. For cold lamination, the film is coated with a water-based adhesive and dried using a heated roller with a hot air drying system. The unwinding system feeds the paper into the lamination section, where, through heat and roller pressure, the film is bonded to the paper. The rollers feature a heated water circulation system with consistent temperature control. The paper roll is secured by shafts controlled by a pneumatic brake. The paper is unwound and fed into a web aligner equipped with automatic web-guiding to ensure precise film lamination. During lamination, film without adhesive is coated with water-based glue and then dried by a heated cylinder, or pre-glued film is unwound directly onto the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is bonded to the film through heat and pressure, applied by the lower rubber roller that presses the paper and film against the cylinder. The laminated web is then rewound onto a core in the take-up section, ready for further downstream processing. SDFM-1100 Specifications Maximum roll width: 1100 mm Maximum roll diameter: 1100 mm Paper weight: 80 - 500 g/m² Film thickness: 10-50 microns Laedpfx Aevy Aipeahok Operating speed: 10 - 65 m/min Electric voltage: 380V 50Hz Total power: 78 kW Maximum energy consumption: 30 kW Total weight: 8,000 kg Machine dimensions: 10,130 × 2,130 × 2,960 mm

Kondisi: bekas, Tahun pembuatan: 1999, Stahlrahmen, Gussarme und -schlitten Montage auf 4 profilierten Rollen auf ø25mm-Führungen Sägeblatt ø350mm AL30 Schnitthöhe 110mm Schnittkapazität 680mm Motorleistung 3kW 3000 U/min extra-flacher Motor Spannung 380V Motorschwenkung nach links von 0° bis 75° Ledpfxoppmtuj Aaheak Kurbel für Höhenverstellung an der Front der Maschine Absaugstutzen-Durchmesser 120mm Abmessungen: 180cm/170cm/H160cm Gewicht ca. 420kg

Kondisi: bekas, For sale is a propeller agitator from EKATO Rührwerk, model EM040. Lsdpfxjga Eg Eo Aahsak Specifications: • RPM: 1420 • Voltage: 220 / 380 V • Power: 1.5 kW • Shaft length: 1800 mm • Total length: 2630 mm • Impeller diameter: 260 mm • Connection: DN300 Further information can be found on the nameplate.