Perangkat pengatur suhu oli

S.I.S.E 250H6 DC68

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Kfsdpsg Ey Rfefx Aahoa Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: bekas, Tahun pembuatan: 2004, Press force 80 t Stroke 16 - 63 mm Strokes per minute 100 - 750 Upright clearance 970 mm Installation height (Stroke + Ram Adjustment at Top) 380 mm Lateral upright pass-through 380 mm Table surface 940 x 910 mm Through-opening in table 770 x 190 mm Table height above floor 1180 mm Ram area 940 x 510 mm Ram adjustment 76 mm Material width 203 mm Material thickness - 6.0 mm Feed length 0 - 120 mm Kfodpfx Aevuua Nsahsa Drive power 37.0 kW Weight 14.50 t Space requirement approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation in accordance with CE standard With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Mechanical roller feed Bruderer BBV 205/120 driven by press main shaft/cardanic shaft Guethle CK cantilever brackets Optionally, a soundproof cabin can be offered – price upon request

Kondisi: bekas, Regoplas RT50 Термо-масляный терморегулятор Термо-масло до 300°C Ksdpfx Aaedmn E Hehefa

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm Kfjdpfxs A Dimo Aahja

Kondisi: sangat baik (bekas), For sale is a system comprising 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation solution for tool and workpiece changeover. The system is in very good condition and fully operational. Both machines are loaded via the Erowa automation; additionally, one machine features its own tool changer. Technical specification sheets are available for download at the bottom of the listing. Technical data for the EDM machines: Tank dimensions (W x D x H): 770 x 670 x 440 mm Dielectric fluid height: max 395 mm Max head load: 100 kg Min. distance: 135 mm Max. distance: 585 mm Rotational speed: 1–20 rpm Measuring resolution: 0.001° Worktable (W x D): 750 x 650 mm Load capacity: 1000 kg Travel X/Y/Z: 525 x 400 x 450 mm Filtration system: Cartridge filter Kjdpsq Su Hnefx Aahofa Filter surface: 16 m² Total capacity: 400 l Dimensions (W x H x D): 1356 x 2653 x 2284 mm Weight: approx. 4400 kg Technical data for Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350° A-axis: +/-180° B-axis: +/-90° Y-axis: 1.1–18.74 m (METERS!) Transfer weight: max. 130 kg The system is also equipped with two magazines. Dismantling, loading, and shipping can be organized across Europe at additional cost. Prices are subject to VAT. Viewing possible by appointment. Please contact us – our team is happy to assist you. Trade-ins or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBUT133-544, Demag KBK crane runway with approximate dimensions 10.5 x 6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made from Demag KBK1/2 rails. System is supplied complete: KBK rails, rail connectors, carriages, end plates, cable support, brackets Including steel 500 kg chain hoist – lifting height approx. 3 m Crane is dismantled and available immediately. Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection only by prior arrangement Kjdpfx Aasty Sxwohsfa Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 kg to 1600 kg. Please inquire for your crane runway, specifying load capacity and dimensions, without obligation.

Tahun pembuatan: 2022, Kondisi: baru, - Discharge: 500 mm - Incline conveyor: 1300 mm Kfsdpsf U Eu Hefx Aahsa - Feed: 600 mm - Usable width: 350 mm / Overall width: 405 mm - Discharge height: min. 700 mm, max. 1000 mm - Cleats: 30 mm high (for usable widths of 350 mm, the cleats are split in the center) - Cleat spacing: 500 mm Available on request: - Special dimensions - Cycle control - Frequency converter

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2019, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19101105, lebar rol: 1.100 mm, Perlengkapan: Pelat tipe tersedia, riwayat servis lengkap, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine designed for both cold and hot lamination. It is intended for single-sided film lamination of paper, with the laminated web subsequently rewound onto a roll. For cold lamination, the film is coated with a water-based adhesive and dried using a heated roller with a hot air drying system. The unwinding system feeds the paper into the lamination section, where, through heat and roller pressure, the film is bonded to the paper. The rollers feature a heated water circulation system with consistent temperature control. The paper roll is secured by shafts controlled by a pneumatic brake. The paper is unwound and fed into a web aligner equipped with automatic web-guiding to ensure precise film lamination. During lamination, film without adhesive is coated with water-based glue and then dried by a heated cylinder, or pre-glued film is unwound directly onto the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is bonded to the film through heat and pressure, applied by the lower rubber roller that presses the paper and film against the cylinder. The laminated web is then rewound onto a core in the take-up section, ready for further downstream processing. SDFM-1100 Specifications Maximum roll width: 1100 mm Maximum roll diameter: 1100 mm Paper weight: 80 - 500 g/m² Kodpsvy Aipefx Aahjfa Film thickness: 10-50 microns Operating speed: 10 - 65 m/min Electric voltage: 380V 50Hz Total power: 78 kW Maximum energy consumption: 30 kW Total weight: 8,000 kg Machine dimensions: 10,130 × 2,130 × 2,960 mm

Tahun pembuatan: 2022, Kondisi: baru, Discharge height 500 mm Incline conveyor 1800 mm Feed opening 600 mm (with hopper) Usable width 250 mm Total width 305 mm Cleat height 30 mm Angle adjustable Mobile Kjdpfx Ash T T Tdsahsfa

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: BO8xx, DEMAG KBK crane ceiling crane runway with dimensions approx. 6x5m (5m bridge) Multiple units of this crane available! Load capacity / lifting capacity: 500 KG - 0.5t Technical data of the system: Runway made from Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, carriages, end plates, brackets/hangers, etc. Crane equipped with internal power supply Including 500KG Demag chain hoist - lifting height approx. 3.5m - with trolley raised Crane is dismantled and immediately available Used condition, see pictures Location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Kjdpfxeupvyvs Aahjfa Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems also available. Load capacity: 125KG - 1600KG Please feel free to inquire about your crane runway with your required load capacity and dimensions.