Mesin gerinda silinder

SAACKE UWIID

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Sumbu: 5, lintasan X/Y/Z: 580 mm / 250 mm / 250 mm, tinggi center: 170 mm, dudukan benda kerja: ISO50, dudukan alat: HSK, diameter maksimum benda kerja: 250 mm, panjang maksimum benda kerja: 430 mm, kecepatan gerak: 15 m/menit, daya nominal: 30 kW, berat: sekitar 6.400 kg. Inspeksi di lokasi memungkinkan. Pedpjxl Uqfefx Abuepl

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Translation: Pjdporgahxefx Abuopl Centre distance: 400–800 mm, Spindle speed: 1000–2700 rpm, Workpiece diameter: 10–300 mm, Grinding wheel diameter: 40–300 mm, Swivel angle: -45 to +45°, Length: 3000 mm, Width: 2500 mm, Height: 2275 mm; equipped with Hoffmann oil mist separator (new filter cartridges), Faudi gravity band filter unit, hydraulic power unit, additional grinding head for grinding worm gears, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, electrical diagrams in paper format. Inspection possible.

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), de-hu-01 Pjdpfsxdm Ugox Abujpl

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Pedpfx Abehcnxrsuopl Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation Psdpfx Abotiwgisujpl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Psdpfew Au H Rex Abuspl Pre-fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully functional, very good condition. Dismantled and stored, immediately available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, A used CNC gantry milling machine with C-axis for turning operations (CNC turning, CNC milling, and angle head machining). Boring mill operations! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring mill operations, including CNC turning, CNC milling, and angle head machining. All operations can be performed in a single setup, combined with the speed and precision of a CNC gantry milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max. turning height: 1,000 mm C-axis for turning operations Original price: €1.8 million Disassembly: by arrangement The machine comes with a protective cover to prevent chips from entering the Hirth gearing on the ram during milling operations. Also included are: a turning attachment head for turning tools and an angle head for side machining on the plate field or rotary table. The angle head can be swiveled in 2.5° increments via the Hirth gearing. All tool holders (milling, turning, angle head) are clamped via HSK-100. A wireless touch probe from M&H (Hexagon) for measurement and workpiece zero-point setting is included. The machine is in operation and can be inspected onsite by appointment. Pjdsvvh R Dopfx Abuopl A video of the machine is available.

Tahun pembuatan: 1979, Kondisi: bekas, Pressing force 160 t Clearance between uprights 850 mm Stroke 400 mm Slide area 800x700 mm Ejector stroke 300 mm Ejector force 20 t Table area 800x700 mm Total power requirement kW Machine weight approx. 12 t Space requirement approx. 1800x1800x4200 mm Sick BWS for safety and automatic operation Ppedpfxjlp Uz Rs Abusl Blow-off device Ejector Mechanical fixed stop Stroke/pressure cut-off Pressure hold time Approved for manual loading/unloading

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin Gerinda Roda Gigi Reishauer RZ303 Ppedsxz E S Eopfx Abusl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 9.000 h, Fungsionalitas: berfungsi sepenuhnya, Pusat pemesinan vertikal model Doosan DNM 400 II tersedia mulai akhir September tahun 2014 dalam kondisi sangat baik. Dilengkapi CNC Fanuc, pompa tekanan tinggi, spindle 12.000 rpm dalam kondisi sempurna, DIN40, 30 alat, pintu otomatis, bak dengan konveyor serbuk LNS. Panduan rol. Psdpfx Abew Uk I Hsuspl