Meninju pers

Sahinler HKM 85

Kondisi: baru, Punching force: 85 t Throat depth: 355 mm Stroke: 80 mm Blade length: 482 mm Godpfx Aoh Hrx Esdteil Motor: 7.5 kW Height: 2040 mm Weight approx.: 2,315 kg With two cylinders, hydraulic 5 workstations: punching, notching station as well as flat, bar, and angle steel cutting stations. Specification: - Hydraulic and electrical components from renowned manufacturers - Technical documentation - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric longitudinal stop, 1000 mm, for automatic cut triggering - Selector switch for setup and operation modes - Lighting - 2 foot pedals - CE-compliant design FEATURE DESCRIPTION / VALUE Punching force: 85 t Throat depth: 355 mm Stroke: 80 mm Strokes per minute (at 20 mm stroke): 25 Sheet thickness (max.): Ø 33 x 20 mm Working height: 940 mm Cutting capacity: 480 x 15 mm, 380 x 20 mm Angle iron 45° (1 leg): 80 x 80 x 8 mm Angle iron 90°: 150 x 150 x 15 mm Blade length: 482 mm Round: 50 mm Square: 50 mm Material thickness: 13 mm Width: 1,920 mm Depth: 950 mm Motor output: 7.5 kW Mains voltage: 400 V, 50 Hz Height: 2,040 mm Weight: 2,315 kg

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Side roller diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes for cone rolling: Gisdpfxed Auacs Adtel • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Tahun pembuatan: 1999, Kondisi: baik (bekas), Plage de longueur de clous : 50 à 90 mm Gijdjdmbp Uepfx Adtol Vitesse : 100 clous/seconde (régulateur de fréquence) Commande : API Siemens S5

Kondisi: siap digunakan (bekas), Sertom-brand hydraulic plate bending machine, working length 25,000 mm with feed-in, two bottom rollers of 300 mm diameter, top roller diameter 318 mm, maximum sheet thickness 14 mm. Roller drive motor power: 22 kW; movement motors: 5.5 kW; lifting frame: 2.5 kW. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Gsdpfx Aenr Npyodtoil

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Voortman V808 CNC Strahlbearbeitungsanlage – Baujahr 2016 (REF: STK‐1549) Konturierroboter | Automatische Zu- und Abführung | 1,25 m Segmente | Rollenförderer Kjellberg SmartFocus 300A Plasmaschneidanlage | Donaldson Absauganlage Gisdpfx Aolff H Ejdtjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Giedpsr D N Eqsfx Adtsl Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, Maschine in ausgezeichnetem Zustand! Standardspezifikation: - Geschweißte Stahlkonstruktion - 3 Antriebswalzen - Horizontale und vertikale Arbeitsposition - Wellen aus gehärteten Spezialstählen - Digitale Anzeige - Tragbares Bedienpult - Bedienungsanleitung Optionale Ausstattung: Technische Daten: Giedpfor Ddurex Adtel - Wellendurchmesser: Ø100 mm - Walzendurchmesser: Ø315 mm - Arbeitsgeschwindigkeit: 7 m/min - Motorleistung: 7,5 kW - Maschinenlänge: 2000 mm - Maschinenbreite: 1450 mm - Maschinenhöhe: 1700 mm - Maschinengewicht: 3650 kg

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: Gjdpfxshzbips Adtoil - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, diameter rol atas: 200 mm, diameter roll samping: 150 mm, ketebalan lembaran (maks.): 6 mm, panjang kerja: 3.000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Top roller diameter 200 mm Giodpouzm Ayofx Adtsl Side roller diameter 150 mm Hydraulic drop-end

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Giodpfx Adokvnumetjl Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.