Mesin tekuk profil

SAHINLER PK-35 F

Kondisi: sangat baik (bekas), 1 Hedpsxuqw Hofx Ag Rjfd

Tahun pembuatan: 2025, Kondisi: baru, -Drum diameter: 1600 mm -Drum length: 2880-3880-4880 mm -Working length: 2000-3000-4000 mm -Screen holes according to your specifications -The screen is made from closed-profile sections -A cleaning brush with a diameter of 300 mm is mounted on the screen and along the entire length of the working section -Flat bar paddles mounted in the drum center enable material turnover -Drum rotation speed approx. 11.5 revolutions per minute -Screen feed via geared motor – Drum drive via geared motor + 2 rubber drive wheels, diameter 230 mm -Screen equipped with electrical control panel -Gravity feed hopper, dimensions: Width 1600 mm, Length 1400 mm, Height 1200 mm -12 months warranty -Made in Europe -CE compliant Hsdpfx Agoq T Sp Hs Rofd

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Hodpst Hw Iiefx Ag Rsfd Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, lebar kerja: 1.100 mm, berat keseluruhan: 1.300 kg, lebar benda kerja (maks.): 600 mm, sambungan udara terkompresi: 6 batang, ketebalan lembaran (maks.): 40 mm, jumlah pemilik sebelumnya: 1, jenis penyesuaian ketinggian: listrik, panjang meja: 3.000 mm, tinggi meja: 850 mm, lebar meja: 600 mm, masa garansi: 3 bulan, Translation into English: Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units: mm, bar Operating manual: 1x manual Paint finish: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Hfodow U A Dmepfx Ag Rod Planetary head station with 3 units: Planetary head version with 6 tools each, drive 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high-wear resistant version) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Stepless feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with starting switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt, drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit lock, belts replaced – Machine is fully operational and in very good technical condition. Set according to manufacturer's specifications/standards. Delivery includes a mechanical functional warranty of 3 months from delivery date.

Kondisi: sangat baik (bekas), lebar total: 4.000 mm, tinggi total: 7.000 mm, jarak antara tiang: 2.000 mm, panjang rak: 900 mm, Perlengkapan: dua sisi, Terdiri dari 3 kolom dua sisi H 6000 mm. 9 rak dengan lengan 750 mm. Kapasitas rak 900 kg. Kapasitas per tingkat 2700 kg. Kapasitas per sisi kolom 8100 kg. Jarak antar kolom 2000 mm. Hfjdpfoulufpsx Ag Red

Kondisi: sangat baik (bekas), Mesh grates / support shelves for pallet racks for 180, 270, and 360 cm rack bays Specifications: Material finish: hot-dip galvanized Total width: approx. 1,340 mm (cross-bar direction) Total depth: approx. 1,080 mm (bearing-bar direction) Suitable for frame depth: 1,100 mm Clear support width: approx. 990 mm Beam support: approx. 50 mm Mesh size: approx. 33 x 66 mm Bearing bar height: 30 mm or Material finish: hot-dip galvanized Total width: approx. 1,330 mm (cross-bar direction) Total depth: approx. 1,040 mm (bearing-bar direction) Suitable for frame depth: 1,050 mm Clear support width: approx. 940 mm Beam support: approx. 50 mm Mesh size: approx. 45 x 70 mm Bearing bar height: 30 mm We have mesh grates in stock for the following rack depths: 1m, 1.05m, 1.1m, or 1.2m This mesh grate is perfectly suited for making optimal use of your rack system and provides outstanding support for your warehousing requirements. Price on request – Contact us for advice! Are you looking for additional shelves or mesh grates in other configurations? No problem! Our team will be happy to assist you in designing a bespoke racking solution tailored to your specific needs. Do you have a rack system to sell? Simply send us photos and dimensions, and we will prepare a fair offer for you. Contact us: Hfsdpfx Ajp Duf Njg Red BLB GmbH – Contact person: Mr. Dominik Blum Tel. Benefit from our delivery service directly to your facility! If you have any questions, do not hesitate to contact us – we look forward to your call or message!

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Hodswp D Nbjpfx Ag Refd Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: bekas, Tahun pembuatan: 2011, Turning machines Travel X: 270 mm Travel Y: 120 mm Travel Z: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Max. torque: 680 Nm Speed range up to: 4000 rpm Control: DMG Driven spindles Hedpfewwv Ifsx Ag Rsfd Driven tools: 50 Chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal unit Conveyor belt for removal of workpieces from the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extractor Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Gantry crane Bollegraaf, kapasitas 30 ton, bentang 32 meter, tinggi angkat 10 meter Hjdpfsw S Ea Sox Ag Rjfd

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2005, jam operasional: 150 h, PBM35-DE-2024 Hodpfx Aoxc N Rhog Rofd