Gergaji potong di bawah meja

SALVAMAC Legend 500 mit Salvastop Video

Kondisi: sangat baik (bekas), jenis bahan bakar: diesel, warna: kuning, Tahun pembuatan: 2022, jam operasional: 295 h,

Kondisi: baru, Perlengkapan: pencahayaan, Take your painting process to the next level – with mobile convenience. Mobile paint booths in container design for painting and coating a wide variety of objects. They are specifically engineered for mobility, allowing for easy transport and rapid deployment on different worksites. The cabin is typically equipped with a ventilation system to ensure air quality, integrated lighting, and a filtration system that prevents paint mist from escaping. The ventilation system ensures that vapors and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Mobile paint booths provide a practical and flexible solution for companies that need a relocatable, effective painting system, easily transported from one construction site to the next. Overview of design and features Our mobile 20-foot Sapi painting containers feature a robust steel framework with welded wall and ceiling panels. Inside, we can install specialized equipment such as cranes or lifting devices. The floor is made from checkered steel plate. Both door panels include ventilation grilles fitted with fine-pore filter mats. One panel is designed as an escape door for safety reasons and features a viewing window. It is important to note that these are not simply converted shipping containers—we manufacture all our containers from the ground up, using only the most durable materials that meet all requirements and have been tested and proven for safety. Standard shipping containers would not meet the required safety standards. Paint mist extraction system in the mobile painting container The paint mist extraction wall for overspray separation is installed in front of the rear wall and equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with guide plates, including various hanging and fastening elements for filter installation. On the exterior rear side of the container, a high-performance, ATEX-certified extraction fan with drive motor is installed on a mounting console. Next-generation mobile paint booths: meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU standards. Accommodating modern coatings such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica coatings imposes stringent requirements on existing painting booths. This is why we have developed a new and unique mobile paint booth to support the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Gjdpsun Shgefx Adtobg Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, humidification or air drying, condensation drying using low-temperature techniques or hot air drying, or pre-treatment of workpieces by high-pressure washing with water recirculation, compressed air blasting, or turbine wheel blasting technology, we offer the optimal solution.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 114 kW (155,00 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, warna: oranye, berat operasi: 25 kg, kondisi ban: 50 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, Tahun pembuatan: 2015, jam operasional: 8.454 h, nomor mesin/kendaraan: 250M301296, Perlengkapan: Pemeriksaan keselamatan UVV, derek, hidrolik, kabin, kopling trailer, lampu depan tambahan, pendingin udara, 6,20 + 4,80 m termasuk Generator Grapple sortir Polyp grab Gjdjtucngepfx Adtjbg Magnet angkat semua dengan quick coupler juga tersedia: Atlas 230MH | 2011 | 6,80 + 5,00 | Polyp grab Liebherr A904C | 2011 | 6,60 + 5,00 | Polyp grab

Kondisi: baru, Tahun pembuatan: 2025, Schiatti Angelo BFP12 double-sided grinding machine for straight edges with arris Max. working width: 1,300 - 4,500 mm Gedpswd Hbiofx Adtobg Flexible configuration of automatic stations: 5 / 6 / 8 / 9 / 10 / 11 spindles - Glass thickness: 3–35 mm - Minimum working width: 160 mm - Max. load weight: 480 kg - Automatic thickness adjustment via PLC control - Collection tray for process water - Incl. transfer stations

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) Gedpfx Adjrmucxetsbg - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade bore: 50 mm Blade speed: 2800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled on one side up to approx. 25° for acute angles and tilted to the left up to 30° Gsdpfxok H Ic Ue Adtjbg TCT circular saw blade 520x4.0/2.8 x 50 mm, 60 ATB teeth, negative hook angle, for wood RLH-ST60 measuring length 6.0 m, mounting side: left Length stop / roller conveyor, heavy-duty version, Stop carriage adjustable from operator position via handwheel, electronic-digital measuring display, stop carriage pneumatically clamped, stop flap folds away to the rear, with steel rollers, 60 mm diameter, roller pitch 200 mm, 400 mm roller width, with 4 support legs and connector, total length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230-volt mains operation, with electric ON/OFF switch and socket. Powerful dark red LED display. Higher precision than the battery-powered crystal display RO-ST60 4.0 m long infeed roller conveyor Mounting side: right Heavy-duty version, steel rollers: 60 mm diameter, roller pitch: 200 mm 400 mm roller width, 3 support legs and connector Location: Ex stock 54634 Bitburg - Immediately available - Image: similar. Machine still in original packaging

Kondisi: baik (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 21100122-F, 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm - Cutting capacity at 90° (round): 120 mm - or (flat): 105 x 105 mm - or (flat): 180 x 70 mm - Cutting capacity at 45° (round): 110 mm - or (flat): 135 x 60 mm - Mitre adjustment left and right: 45° - Tiltable mitre adjustment of the saw head to the left for bevel cuts - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm Gbodpfxewq N Swo Adtog - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1,730 x D 1,200 mm - Weight approx.: 180 kg

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included Gbjdpfx Adegwt S Totog • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Gbedpsizkhvefx Adteg Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES Gedega T E Aspfx Adtsbg * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte