Sistem peledakan | Sistem daur ulang & ekstraksi

SAPI GmbH Sandstrahlanlage Sandstrahlkabine | Großraum-Strahlkabine

Kondisi: baru, Tahun pembuatan: 2024, The SCHORR electric dumper is ideally suited for transporting heavy loads and bulk materials. With a load capacity of 500 kg, this electric-powered wheelbarrow is a real powerhouse, effortlessly and, above all, quietly handling even larger loads. Thanks to its hydraulic tipper with a high tipping radius, you can conveniently, quickly, and thoroughly unload your cargo. Our electric dumper is powered by a maintenance-free, brushless 48V electric motor with 1000 watts of power. This motor is not only especially powerful, but also extremely durable and low-maintenance. Additionally, the motor is very quiet, making it ideal for use in stables or other noise-sensitive environments. The side extensions for the mini dumper increase the loader volume by more than 60%. The side extensions are ideal for loose, lightweight materials such as straw, hay, lightweight rubble, etc. Please note that the maximum allowable payload remains unchanged at 500 kg. The SCHORR electric motorized wheelbarrow offers an impressive battery life of 8 to 10 hours, allowing you to get through your workday or shift without difficulty. Charging takes approximately 7 hours for a full charge. The battery-powered dumper is easily charged using the included charger and a standard 230V socket. The dumper’s compact size, combined with its swiveling rear wheels, makes it especially agile and maneuverable. It is therefore ideal for use in confined construction sites or narrow corridors (such as in stables). SCHORR Electric Dumper RR500DEHRAS – Discover the Advantages: • Load capacity up to 500 kg • Increased loader volume • Hydraulic tipping function (effortless dumping) • Extremely user-friendly, requiring minimal exertion • Powerful 1000W, 48V electric motor • Exceptionally quiet and low-vibration operation • Compact dimensions – ideal for confined workspaces Technical Data • Load capacity: 500 kg • Weight: 209 kg • Tipping drive: Hydraulic • Motor: 48V electric, 1000 watts • Four lead-acid batteries (12V, 32Ah each) • Battery runtime: 8 – 10 hours • Charging time: 6 – 7 hours for full charge • Speed: ◦ Forward 1st gear: max. 3.3 km/h ◦ Forward 2nd gear: max. 4.2 km/h ◦ Forward 3rd gear: max. 5.0 km/h ◦ Reverse: max. 1.5 km/h • Overall dimensions: 173 cm x 77 cm x 103 cm • Container dimensions: 1061 mm x 674 mm x 670 mm • Water tank capacity: 150 liters • Loader volume (depending on filling): up to 500 liters The SCHORR electric dumper is optimal for transporting heavy loads and solid materials (such as stones, sacks, pallets, etc.). With a load capacity of 500 kg, this electric wheelbarrow is a true powerhouse, handling even larger loads effortlessly and, most importantly, quietly. Thanks to its hydraulic tipper with a generous tipping angle, you can unload your cargo conveniently, quickly, and completely. Would you prefer to finance or lease this machine? No problem! We offer attractive financing and leasing options as well. Contact us for more information and advice on the various options. We look forward to your inquiry! Nljdpfsufx Utsx Alksa If you have any further questions about our electric motorized wheelbarrows, our knowledgeable team will be happy to assist you by phone or email. We look forward to hearing from you and supporting you with expert advice.

Kondisi: baru, Very powerful industrial polishing machine Two versions: - Motor ----- 900W - 230V - 1 Phase - Motor ----- 900W - 400V - 3 Phase Polishing wheels D x W ----- 200 x 20 mm Speed ----- 2850 rpm Shaft diameter ----- 16 mm Packing dimensions ----- 620 x 320 x 340 mm Weight ----- 20 kg Includes mounted hard and soft polishing wheel OPTION * Base cabinet Price: €99.00 excl. VAT Nledpfxsga Twxo Alkja

Kondisi: siap digunakan (bekas), Gaya tekan: sekitar 700 kN (sekitar 70 ton) Daya motor: sekitar 11 kW Catu daya: 3 × 400 V / 50 Hz Berat satu bal: hingga sekitar 600 kg Dimensi bal: sekitar 1100 × 1100 × 1200 mm Dimensi mesin: sekitar 5,9 m panjang, 2,5 m lebar, sekitar 2,6 m tinggi Berat mesin: sekitar 7 ton Nodpfx Asra Dddolkola Waktu siklus: sekitar 45–47 detik Fitur konstruksi - Bukaan pengisian besar untuk karton - Kemungkinan pengisian otomatis (misal: dengan konveyor) - Pengikatan kawat manual (4 kawat) - Pengunci palet dan pintu hidraulik untuk pengambilan bal Keunggulan mesin press ini - Bal besar, lebih sedikit transportasi - Gaya tekan tinggi - Dirancang untuk operasi kontinu Tahun produksi tersedia: 2016-2020

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. Nlodpfjqt Dmyox Alkea We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and 300 mm center of gravity offset: 10 t Load capacity with vertical faceplate position and 830 mm center of gravity offset: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed hydraulically infinitely variable: 0.025 - 0.75 rpm Tilting range: 0 - 135° Tilting time for full range upwards: 140 s Tilting time for full range downwards: 120 s Hydraulic drive: 380 V Height of tilting axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t Nledpfxecblc Sj Alkea

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Nlsdped Ixadofx Alksa Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 1.000 h, de Nsdpfjxpiw Usx Alksla

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 5.000 kg, Complete set incl. hand and double foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Njdpfx Alol Dq U Ujkola Weight: 3200 kg Speed from 0.01 to approx. 0.9 rpm CE certified

Kondisi: bekas, Tahun pembuatan: 2007, Overview The machine was built in 2007 by the Spanish company Seppelec. The machine is still assembled but no longer in operation, as the plant has ceased production. Prior to decommissioning, the machine underwent intensive maintenance and was tested with phosphorescent material. Technical Details Capacity: 13,500 l/h Pressure to prevent degassing: 7 bar Temperature during pasteurization: 85°C Nljdpfx Aoq T Ak Hslkoa Machine Documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control system: Siemens S7-300 Cpu 314 2dp Communication interface type: Profibus

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Nsdpfxjd Iipxo Alkola SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system