Perangkat pemotongan

Schüco 299 908

Tahun pembuatan: 2021, Kondisi: baru, de Iedpfehrukisx Aa Noal

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Iodpfx Aefxyhfsa Njal Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm Iasdpfxof E Higj Aa Njl - Angle-adjustable fence left/right: 20° - 90° - Milling spindle speed: 4500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 - 8 bar - Air consumption per working cycle: 10 l - Pneumatic profile clamping - Table base frame - Required space approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Adjustable-angle support vise: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required floor space (approx.): W 800 x H 1000 x D 1300 mm - Weight (approx.): 250 kg Iasdpfjpug D Eex Aa Nsl

Tahun pembuatan: 1987, Kondisi: baik (bekas), for cutter diameter up to max.: 300 mm Saw stroke manually adjustable: 550 mm Manual feed via spindle: 150 mm Height adjustment via spindle (manual): approx. 130 mm Table semi-circle diameter: 500 mm Saw blade drive: 380 V, 2.2 kW Isdeghl Emspfx Aa Nsal Saw blade speed: 2700 rpm Required space approx.: 1000 x 900 x 1300 mm Weight approx.: 100 kg

Kondisi: baik (bekas), Tahun pembuatan: 1969, Pneumatic gluing press, max. pressure 10 bar, heated gluing beam, bonding area 550 x 40 mm, infinitely variable temperature control for both upper and lower gluing beam from 0 - 300 °C, stepless adjustment of bonding hold time, drive power: 5 kW, 380 Volt-50 Hz, two-hand operation by SIEMENS. Pressure build-up via toggle lever, max. opening stroke approx. 30 mm. Iodped Dxqbefx Aa Njal

Kondisi: baik (bekas), Plasma cutting unit, plasma cutter - Equipment: without torch package - Cooling: water-cooled Ijdpfxeb A Inno Aa Njal - Maximum cutting current: 70 A - Mains voltage: 3x400V

Kondisi: baik (bekas), Tahun pembuatan: 1995, 24315 Technical Data: - Abrasive belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via handwheels - Abrasive belt speed: 30 m/sec - Contact wheel / grinding roller: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm, 28 + 33 + 36 + 48 + 60 + 68 mm Iedpfet Stfhsx Aa Neal

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 47885/05, Pneumatic punching units for window profiles Isdpfx Asff Apija Noal Stroke: 20 mm

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Pneumatic punch Iaedpfx Aeff Apwea Nol