Pneumat. Perekatan

O.R.E. Presse

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Under-table press Nodpfx Ajkuz T Ujhwoku Pressing force: 300 kN Press area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l Nkodpefxyhfofx Ahweu The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Data teknis: - Bukaan hopper: 1850 x 1250 mm - Volume hopper: sekitar 3,0 m3 - Diameter rotor: 500 mm - Panjang rotor: 650 mm - Kecepatan putaran rotor: 80 rpm - Kontrol SPS - Motor – gearbox: 18,5 kW - Panel kontrol (sudah terhubung sepenuhnya) termasuk kabel 5 m - Start bintang-segitiga otomatis Nksdpfx Ahjwb Sdqjwou - Berat: 3600 kg - Kapasitas tergantung pada jenis material Aplikasi utama dan material yang dapat diproses: Daur ulang dan pengurangan volume logam non-ferro Daur ulang dan pengurangan volume limbah kayu Daur ulang dan pengurangan volume plastik dan busa / styrofoam Daur ulang dan pengurangan volume kabel listrik dan gulungan Daur ulang dan pengurangan volume wadah plastik dan material komposit

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 550 mm, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P. The machine is fully functional and immediately ready for operation. In 2021, a new spindle was installed and all maintenance work has been carried out. Nedpfx Aowbhq Hehwsku History: 2019: new ball screw 2021: new spindle 2022: single-shift operation 2023: occasional job orders 2024: taken out of operation but remained connected to power 12/2025: disassembled, cleaned, and stored Technical data: X travel: 600 mm Y travel: 650 mm Z travel: 550 mm Control: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total power requirement: 44 kVA Dimensions (approx.): 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t No fixtures or vices included in the offer. Transport and loading can be organised Europe-wide at extra cost on request. Prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Used machinery - purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Tahun pembuatan: 2004, Kondisi: bekas, Ottevanger C5 Containerized Feed Mill Automated grinding and mixing line with an approximate capacity of 5 t/h. Including, among others, the following components: Nedpfsq Hr Rzex Ahwoku - 55 kW Hammer Mill 650-375 - 11 kW 1000 L Mixer PM1000 - Silos - Batch weighing system - Dosing screws - Elevators - Hoppers - Control cabinets

Tahun pembuatan: 1981, Kondisi: baik (bekas), nomor mesin/kendaraan: 3626, OFFER 21448 Technical Data: - Max. working width: 2540 mm - Max. cutting capacity (mild steel S235): 4 mm - Motorized cutting angle adjustment - Adjustable cutting gap via graduated adjustment screws - Number of hydraulic hold-downs: 14 pcs - Motorized backgauge with positioning system: 10 – 1000 mm - Strokes per minute (depending on cutting angle and length): 23 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 1030 mm - Space requirements (approx.): W 2500 x H 1630 x D 2150 mm - Weight (approx.): 3600 kg Equipped with: - Pneumatically assisted sheet lifting device - Front squaring arm and support arms - Electronic cutting depth adjustment Nodpshhc Ixefx Ahwoku - Cutting line illumination - Electric foot switch

Kondisi: baru, MAXION BT 20 Bench Drill Powerful MK2 machine featuring an easy-scroll control wheel and a large display. Digital drilling depth, piece counter, fine adjustment for drilling depth, and an LED lamp are all standard features. The new BT20 thus combines innovative features with proven drive technology. Technical Data: - Drilling capacity: 20 mm - Tapping capacity: M16 - Spindle: MK2 - Drilling depth: 100 mm - Throat depth: 215 mm - Distance spindle/base plate: 185 - 541 mm - Table dimensions: 340 x 445 mm - T-slot width: 12 mm - Column diameter: 90 mm - Overall height: 990 mm - Weight: 120 kg - Pole-change motor: 0.6/1.2 kW - Power connection: 400 V/50 Hz Two spindle speeds available: MAXION BT 20 (M00027): - Infinitely variable spindle speed: 100 - 1,800 rpm MAXION BT 20 (M00028): - Infinitely variable spindle speed: 240 - 3,600 rpm Optional accessories: - Drilling package Nkodpfxsf Nrbfj Ahwju - Tapping unit with digital depth display - 200 mm longer column - Cross table MF3 - Base cabinet - Electric cooling unit Note: ALSO AVAILABLE AS A COLUMN DRILL PRESS

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Pelat tipe tersedia, Dua kompresor yang dibongkar secara profesional dari produsen GEA Bock. Lembar data teknis tersedia, lihat gambar. Nsdpfx Ahewuvquowsku

Kondisi: baru, EN: Precise, smooth-running standard drilling machine, high accuracy and quality. Drill table adjustable via rack and swivelable around the column. Full motor protection, star handle. Mains connection 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Throat: 180 mm Distance spindle/table: up to 380 mm Table size: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipment: - Forward/reverse selector switch for thread cutting Nkodpfxeda Nqxe Ahweu - Full motor protection - Star handle In stock, immediately available

Tahun pembuatan: 2015, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 2015020890, For sale is a magnetic filtration system with an automatic cleaning mechanism. Filtration systems of this type are typically manufactured only upon individual customer request. This particular unit was used for demonstration purposes only and has seen minimal actual operation. Product advantages - Can be integrated into existing production lines - Separation of all ferrous metal contaminants - Highly corrosion-resistant - Highly wear-resistant - Compact design - Low maintenance Technical details Nkjdpfx Ahjcwghbjweu - Dimensions: 400 x 400 x 390 mm - Inlet: 260 x 260 mm - Outlet: 260 x 260 mm - 8 magnetic filter rods