6 Mesin bubut otomatis spindel

Schütte SF 26 DNT

Kondisi: bekas, Tahun pembuatan: 1988, Schutte 26 SF-DNT Çoklu Mil Mekanik Torna Tezgahı Dodpfold Npvox Adgjcb Çalışır durumdadır, tezgahımız Bursa Gemlik fabrikamızda görülebilir. Projenize özel olarak karşı aparatı ayarlanmış şekilde teslim edilebilir. Bunun için aparatlandırma ve ayar maliyeti ayrıca talep edilecektir.

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Dsdpfxst Hagns Adgecb Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Multispindle lathe Schütte SF26S DNT Djdpfx Aog Ezv Hedgjcb

Tahun pembuatan: 2002, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: 16.34.02, 6-fach-6-Schlag-Kopierpresse MULTIPRESS MP610LS Dcedpfx Ajh Tkrajdgsb Maximaler Abscherdurchmesser (bei 500 N/mm²): 12 mm Maximale Abscherlänge: 105 mm Maximale Auswerferlänge (Matrizenseite): 80 mm Maximale PKO-Länge: 23 mm Maximale Geschwindigkeit: 180 Stück/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 5.650 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar feeder Fanuc 31iB - 5,646 operating hours Country of manufacture: CH Voltage: 400V Dimensions: 2135x1250x2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Maximum bar diameter: 16 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool Station 1 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Tool Station 2 Number of positions: 5 Dsdpfx Adjkhnqgjgjcb Number of driven positions: 3 Driven tool speed: 8,000 rpm Endworking Unit Number of positions: 4 Number of driven positions: 3 Driven tool speed: 8,000 rpm Backworking Number of positions: 6 Number of driven positions: 6 Driven tool speed: 8,000 rpm Electrical supply Line voltage: 400V Technical data is provided without obligation; errors and omissions excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg Dsdpfevgxfyox Adgscb NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant supply through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.150 mm, berat keseluruhan: 12.000 kg, diameter bor: 32 mm, Heidenhain iTNC530 CNC control system 12-position tool changer Technical data / details: Travels: X-axis (table, longitudinal): 1800 mm Z-axis (column, cross): 1700 mm W-axis (drilling unit, cross): 1150 mm Y-axis (drilling unit, vertical): 1200 mm Dcodpowcldaefx Adgjb B-axis (rotary table): 360° A-axis (drilling unit): -25 to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, see photos.

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS 32 C Dsdpfxeuhaqbo Adgocb

Tahun pembuatan: 1977, Kondisi: bekas, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, three-jaw chuck, and Multifix quick-change tool post. Front guideway shows signs of wear. The machine is in operational condition and can be demonstrated under power by prior arrangement. Dodpfxemdn Dxj Adgjcb

Kondisi: bekas, Article: Clamping heads Brand: various manufacturers For multi-spindle automatic lathes, used or new Please contact us for further information and pictures via email(at) or Dcjdpfx Adon H Nzuogjb