Alat mesin penggiling

Schütte WU 405

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Gjdpfx Adjxddvnstoil Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Tool grinding machine Jungner Sweden Year of manufacture: 1995 Accessories Gedpfxowdihro Adtoil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Mobile 3D Coordinate Measuring Machine Camera, hand probe with display Max. measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Godpju S Rnlsfx Adteil Repeatability ±10 μm* Accessories

Kondisi: bekas, Surface grinding machine BLOHM Type HFS 6 Serial No.: 10493 Year of manufacture: 1973 Electromagnetic chuck 600 x 300 mm Gisdpfx Adjd Hbafstsl Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center to table surface max. 600 mm Distance spindle center to magnetic chuck max. 517 mm Clamping surface table 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2-30 m/min, stepless Table cross feed 2-65 mm, stepless, electric Rapid cross traverse 3 m/min Vertical feed 0.001 - 0.020 mm per infeed pulse Rapid vertical traverse 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Hydraulic pump motor power 2.2 kW Grinding spindle motor power 5 / 6 kW Power supply 380 Volt, 50 Hz Total power consumption 11 kW - automatic depth infeed - hydraulic longitudinal table movement - grinding wheel dresser mounted on spindle head - electromagnetic chuck, height 83 mm - separate coolant system with magnetic filter in filter housing - grinding spindle circulation lubrication - free-standing control cabinet (800 x 500 mm) - swiveling control panel - operating manual and spare parts catalog Space requirement L x W x H 3000 x 2200 x 2100 mm Weight of surface grinding machine 3000 kg Weight of control cabinet 200 kg In good condition

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Gisdpertd Uwefx Adtel Weight: 520 kg Good condition

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Gijdpfx Adeuxfucstel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, TECHNICAL DATA - Number of Axes: 3 - Centre Height: 175 mm - Distance Between Centres: 1000 mm Gisdpfxsuhbydj Adtsl LINEAR AXES - Grinding Length: 500 mm - Travel X x Z: 267 x 650 mm GRINDING SPINDLE HEADSTOCK - Continuous Orientation: +/-8.5° - External Grinding Wheel Dimensions: 500 x 80 x 203 mm - Grinding Wheel Holder Spindle Headstock Power: 7.5 kW - Cutting Speed: 44 m/s WORKPIECE SPINDLE HEADSTOCK - Taper Type: MT5 - C-Axis: +/-0.5° - Power: 1 kW - Rotational Speed: 30–1,000 rpm TAILSTOCK - Taper Type: MT3 - Quill Stroke: 35 mm - Quill Diameter: 50 mm - Max. Workpiece Weight Between Centres: 130 kg ELECTRICAL SUPPLY - Supply Voltage: 400V 50 Hz - Machine Dimensions: 2700 x 2350 x H. 2100 mm - Weight: 4,000 kg OPERATING HOURS - Operating Hours: 17,775 h ACCESSORIES - CNC FANUC 16i-TA Control - Pictogramming - Studer RELEASE C - Remote Control with Electronic Handwheel - SENSITRON - Hydrobalance HBA 40000-1 Dynamic Balancing Device - MOVOMATIC C25 Automatic Length Probing Arm - MOVOMATIC In-process External Diameter Measuring Arm - Grinding Wheel Guard with Automatic Tilting - Fixed Diamond Dressing Device on Workpiece Spindle Headstock - Coolant Tank: 375 l - Paper Filter - Oil Mist Extraction - Grinding Wheel Flange Holders

Kondisi: baik (bekas), Manufacturer: ESTARTA Model: 301 MV Condition: Used Stock Number: 4576 Location: Badajoz, Spain Dimensions: 1520 x 1020 x 1260 mm Weight: 1,550 kg Wheel gap opening: 1.5 / 50 mm Max. grinding wheel width (in plunge grinding): 125 mm Work wheel dimensions (OD x ID x width): 300 x 125 x 175 mm Min. external diameter of work wheel: 220 mm Max. profile depth of work wheel: 8 mm Gijdpfx Aer Ezfpedtsl Regulating wheel dimensions (OD x ID x width): 220 x 125 x 125 mm Min. external diameter of regulating wheel: 165 mm Max. profile depth of regulating wheel: 8 mm Work wheel motor power: 7.5 kW Regulating wheel motor power: 0.75 kW Work wheel head tilt angle: +/- 5º

Tahun pembuatan: 1996, Kondisi: bekas, Schütte SF 26S DNT Year of construction: 1996 Control system: Siemens 840C Number of spindles: 6 Max. bar diameter [mm]: 26 Giedji Hb Szepfx Adtol Bar loading magazine: Cucchi BLT Multi-6 (year 2015) Positions I + III + IV + VI: Longitudinal and cross slides Positions II + V: CNC slides Feed in position VI Pick-off in position VI Coolant system Ruez hinged belt conveyor integrated in machine bed Knoll hinged belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295

Tahun pembuatan: 2011, Kondisi: diremaj di bengkel (bekas), Boschert EASY SHARP Tool Grinding Machine Configured for TRUMPF Tool System (AMADA system optional) Machine for punch tool maintenance with a cooling system and particularly powerful motor, making it suitable for use with diamond grinding wheels as well. Used machine – currently being overhauled Godpfjid I T Ijx Adtsil Equipment for TRUMPF tool system up to size III Accessories: - Tool holder for flat and Whisper punches - Die holders for sizes I, II, and III - New corundum grinding wheel - Dressing diamond - Overhauled cooling system and machine base Technical data: - Grinding wheel diameter: 175 mm - Height adjustment: 150 mm - Working area: 400 x 150 mm - Motor power: 2.2 kW - Motor speed: 2825 rpm Optional: Adapter for Amada system available Pictures similar