Mesin pembentuk roda gigi

Gleason 100S

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Space requirement: approx. 4 x 3 x 2.5 m Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Technical Data: Nominal workpiece diameter: 100 mm Nksdpfxov Ehbbo Abvjw Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight: approx. 7,000 kg With robot cell

Kondisi: hampir baru (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 280 mm, produsen pengendali: HEIDENHAIN iTNC530, berat benda kerja (maks.): 15 kg, lebar meja: 200 mm, panjang meja: 200 mm, kecepatan spindel (min.): 42.000 rpm, cnc-530-specs Njdexpg H Hjpfx Abvokw

Kondisi: bekas, Tahun pembuatan: 2005, Machine weight approx. 7,800 kg Space requirement approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gear: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Spindle taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X axis): 180 mm - Column swivel (B axis): -1 to +11 degrees Machine - workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - X-axis feed rate: 12,000 mm/min - Workpiece table (C axis): 0-400 rpm - Cutter (C2 axis): 0-300 rpm - Spindle stroke (A axis): 500-3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Connected load of the machine: 35 kVA - Cable cross-section: 35 mm² - Fusing: 80 A Nkedpfx Aeudc S Hsbvjw

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears Nedpevzhf Sofx Abvskw - Milling arbors - Clamping devices - Documentation

Kondisi: bekas, Tahun pembuatan: 2014, max. diameter putar 160 mm Nksdpfx Abjqvd Iqovjw max. tinggi putar 150 mm diameter benda kerja maks. 100 mm tinggi benda kerja maks. 150 mm kecepatan putar maks. 6.000 rpm perjalanan - x 700 mm perjalanan - z 375 mm sumbu-c 360 ° Kontrol FANUC Mesin bubut vertikal | EMAG - VL2 dilengkapi dengan ban keliling benda kerja. Mesin dalam kondisi sangat terawat. Harap dicatat bahwa detail teknis diambil dari mesin sejenis.

Kondisi: bekas, Tahun pembuatan: 2007, Control system: Siemens Sinumerik 840 D Weight: 57,000 kg Operating voltage: 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 Designed for hobbing cylindrical and worm gears, as well as all other regularly occurring generatable profiles and shapes on cylindrical workpieces. Gleason’s large gear hobbing machines offer maximum productivity for roughing and finishing of cylindrical gears across various industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear manufacturing, and many more. The drive power range takes future tooling developments into account. Naturally, the hob head drive is backlash-free. These machines are especially well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and comes equipped with the corresponding chip conveyor for both processing methods. The machine is fitted with an internal profile milling head as a motorized milling head. --> Working area and technical data Workpiece nominal diameter: 2,400 mm Maximum hobbable diameter approx.: 2,800 mm Minimum/maximum center distance between cutter and workpiece axis: 100/1,200 mm Maximum axial slide travel (special version): 1,300 mm Maximum clampable cutter (internal milling head): Maximum diameter: 440 mm Maximum cutter width: 90 mm Internal profile milling head swivel range/vertical axis: +/- 15° Cutter arbour taper: HSK-B160 Maximum cutter traverse: 300 mm Table diameter: 2,500 mm Dividing wheel diameter: 2,200 mm Table bore: Diameter: 800 mm Depth: 875 mm Maximum table load approx.: 40,000 kg Maximum feed and rapid traverse rates: Axial (Z-axis): 4,000 mm/min Radial (X-axis): 3,000 mm/min Tangential (Y-axis): 3,000 mm/min Nkjdpfswzyp Iox Abvow Cutter cooling lubrication unit/Electric centrifugal pump: approx. 150 l/min Chip conveyor discharge height (raised): 1,600 mm Raised main column: 1,300 mm axial slide travel Internal profile milling head as motorized milling head instead of standard motor milling head Maximum hobbing depth in steel with approx. 600 N/mm² tensile strength: approx. 65 mm Stepless cutter speed: 50 – 150 rpm Maximum cutter diameter: 440 mm Minimum cutter root diameter: 310 mm Maximum cutter width: 90 mm Minimum internal diameter at 0° helix angle: 800 mm+ Maximum workpiece height at 0° helix angle: 600 mm Maximum workpiece ring thickness (incl. clamping fixture): 500 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 693068, berat keseluruhan: 7.300 kg, daya: 30 kW (40,79 hp), Walter Helitronic Vision CNC Werkzeug- und Schleifmaschine mit Palettenlader Universelle Werkzeug- und Schleifmaschine (CNC-gesteuert) Hersteller: Walter, Modell: Helitronic Vision, Seriennummer: 693068, Baujahr: 2008 Beschreibung: Geeignet zur Herstellung und Nachschärfung von Metall- und Holzbearbeitungswerkzeugen aller Art. Die Maschine kann unter Strom besichtigt werden. Technische Daten: Nkodpouqzdpefx Abvsw • Längsbewegung (X-Achse): 480 mm • Vertikalbewegung (Y-Achse): 320 mm • Querbewegung (Z-Achse): 700 mm • Drehtisch Schwenkbereich (C-Achse): +/- 200° • Werkstückaufnahme: ISO 50 • Max. Werkstückdurchmesser: 320 mm • Werkstücklänge Umfangsschleifen: 370 mm • Werkstücklänge Stirnschleifen: 320 mm • Genauigkeit, lineare Auflösung: 0,0001 mm • Radiale Auflösung: 0,0001° • Spindeldurchmesser: 100 mm • Schleifscheibenaufnahme: HSK50 • Schleifscheibendurchmesser: 200 mm • Schleifspindeldrehzahl: 0 – 12.000 U/min • Spitzenleistung: 30 kW • Anschlussleistung: 35 kW (460 V / 60 Hz) • Gewicht ca.: 7.100 kg • Abmessungen (L x B x H): 3.649 x 2.490 x 2.301 mm Zubehör: • Haltevorrichtung zum Öffnen der Schleifscheibe (nicht enthalten, wie auf Fotos abgebildet) • Stufenlose Drehzahlregelung, Messtaster, pneumatische Werkstückspannung • Elektrostatischer Nebelabscheider • Feuerlöschanlage • Ölauffangwanne, 2 Schleifscheibenflansche, kompletter Satz Handbücher • Turmoil Drive Chiller • Paletten für Lader: 8 Stück – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10 Stück HSK-Schleifscheibenaufnahmen Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • Der Computer wurde aufgerüstet und ist sehr schnell beim Rendern der Werkzeuge in Tool Studio Zustand: • Hervorragender Zustand, sehr präzise und konstant. Oktober 2023: Y-Achse komplett überholt (Linearmotor, Führungen, Kompensationszylinder, Festo-Booster-Pumpe durch United Grinding erneuert). • Es wurde ein 1 Mikron-Filtersystem verwendet (nicht enthalten), daher extrem sauber gehalten • Verladung auf einen Tieflader für den Versand für 1.200 $ möglich. Gerne erstellen wir Ihnen auch ein Angebot für den Versand oder die Seekistenverpackung.

Tahun pembuatan: 2012, Kondisi: baik (bekas), nomor mesin/kendaraan: ENOG, Demag KBK overhead crane rail system, approx. 8x4m Load capacity / lifting capacity: 250 kg - 0.25 t Technical data of the system: - Crane runway made of Demag KBK1+2 rails System is delivered complete: - KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Incl. Demag DC-COM 250kg electric chain hoist Crane has been dismantled and is immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125kg to 1,600kg Please inquire about your crane rail with desired load capacity and dimensions. Nedpfx Abemqf Nfsvskw

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas),

Kondisi: sangat baik (bekas), Current gauge (center-to-center) approx. 25.0 m Outreaches: - Fixed support usable (possible)/total (possible) max. approx. 18.5 (21.5)/22.0 (25.0) m - Slewing support usable/total max. approx. 12.5/16.5 m Lifting height under spreader current/possible approx. 11.3/14.0 m Manufacturer/Rebuild TAKRAF/TEICHMANN Rebuild 2019 Nsdpfod N D U Dex Abvekw