Tekan bingkai

Schafberger & Sprödhuber RP 1200 KG

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Gjdpsu Uvalsfx Adtjbg Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Model LPP – SPECIAL FORMAT Universal Gluing Stand / Frame Press Pressing Surface approx. L x W 3800 x 3000 mm Setup Depth approx. 1300 mm 6 units hand-hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressing force finely adjustable via hand lever, cylinders can be swiveled 360° as desired Incl. access ladder – on castors, retractable NEW MAGNETIC CLAMPS Ideal press for joineries producing frames, solid wood panels, or custom-shaped windows Gbedpfx Adjtgq Ibetog Equipped with various pressing elements, see photos. Used Machinery Notice: - Specifications subject to error and prior sale. - Listed prices are ex-works prices – free loaded! - The machine has been cleaned and function-tested. - All machines are sold as inspected on site, without any warranty. Buyers are welcome to inspect the machines on site. - Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, tinggi kerja: 2.400 mm, lebar kerja: 3.500 mm, daya: 1,5 kW (2,04 hp), 3 vertical, 2 lateral pressure cylinders Condition: function-tested, very good, used Godpfxjw Hlt Ns Adtobg

Kondisi: bekas, Tahun pembuatan: 1999, Carriage length: 3800 mm Cutting width at rip fence: 1500 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Rip fence display: digital Godpjvxi Ddefx Adtsbg Crosscut gauge display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 80 mm and 120 mm Machine length: 3900 mm Machine width: 2200 mm Weight: 1000 kg

Kondisi: bekas, Tahun pembuatan: 2003, Tinggi kerja 2300 mm, lebar kerja 3500 mm, motor 1,5 kW. 3 silinder penekan dari atas, 2 dari samping. Tekanan silinder per silinder: 3000 kg. Langkah silinder tekan hingga 200 mm. Hidrolik: 10-150 bar. Kebutuhan ruang: 3950 x 900 x 2550 mm. Berat: 670 kg. Lokasi penyimpanan: Nattheim. Gbjdovvkmbepfx Adtjg

Kondisi: bekas, Tenon-mortise machine, tenoning machine, tenon cutter, slotting rotor, tenoning and slotting machine, mortising and tenoning machine Godpfx Adsf D H E Netebg -Manufacturer: Festo, tenoning and slotting machine -Type: ZA 101/S -Technical data: see nameplates/photos -Dimensions: 1675/1545/H1330 mm -Weight: 546 kg

Kondisi: baru, Working width 4500 mm Working height 3000 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5500x1400x3550 mm Weight 3000 kg S&S Frame Press Bavaria 2000 L ----- With automatic pressing cycle and manual control for corner joints (tenon & mortise and dowel joints/mortised tenon), switchable via selector switch on the control cabinet. Equipped as standard for optional use of counter profiles if sashes are folded on the loose part. CE-compliant version Base machine in extra-strong welded frame construction, with thick-walled special hollow sections. Guide rails for the pressing beams at the press corners are finished for wear resistance. Fast, smooth manual width adjustment via ball-bearing mounted carriage, locking with 50 mm hole grid; optionally available with motorized width adjustment and hydraulic clamping (at extra cost). Height adjustment and pressing via long-stroke cylinders in a single working cycle. Right press corners with integrated horizontal cylinders eliminate the need for vertical positioning of the horizontal cylinders, avoiding cylinder collisions. The lower counter-support can be set to the optimal feeding height in several positions. 3 kW compact hydraulic power unit with integrated control block, infinitely variable pressure adjustment from 20 to 120 bar, manometer included. Operation via push buttons with separate control circuits for vertical and horizontal pressing cylinders, mounted on a freely movable control panel. 2 double-acting vertical pressing cylinders, strokes tailored to working height, piston diameter 60 mm Max. pressing force per cylinder: 2100 kg 2 double-acting horizontal pressing cylinders, 80 mm stroke, piston diameter 40 mm Max. pressing force per cylinder: 1250 kg Counter-support and pressing plate depth: 100 mm Control cabinet at the machine base (left), 400 Volt, 50 Hz Machine supplied with plug, ready for connection: 16 A Finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: Length x Height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (Length x Height) Required space: 5,500 mm x 1,400 mm x 3,550 mm (L x W x H) Gbodpfx Ajwg Hr Tedteg Article: Mid pressure beam, complete with pressing cylinder, pressure hose and shut-off valve, up to 2,750 mm height Note: actual working height: 3,000 mm Article: Individual pressure control for mid pressure beam, Pressure adjustment range: up to 100 bar (For pressing muntin bar windows) Article: Continuously height-adjustable cross pressure device, complete with pressing cylinder and counter-support, throttle and shut-off valve Article: Individual pressure control for cross pressure device Pressure adjustment range: up to 100 bar (For pressing muntin bar windows) Article: Shut-off valve on 3rd vertical cylinder Article: Shut-off valve on upper horizontal cylinder Article: Angled window control for vertical cylinders Article: Clip-on swivelling pressure plates for pressing up to 60 degrees Article: Double swivelling pressure plate for pointed windows (triangle) Article: Extension for swinging pressure...

Kondisi: baik (bekas), Technical Data for Pallet Rack Upright: Racking system: Mecalux The scope of delivery includes: 01x pallet rack upright, used Material color: blue Frame type: M-81 Frame profile: 80 x 70 x 2.00 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) 8,000 mm high 1,100 mm deep Your contacts at our company: Mr. Andre Evering Gbodpfx Adsmmcd Notsg Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be individually requested from us depending on delivery location and scope.

Kondisi: bekas, incl. various slotting and tenoning discs used, good condition Manufacturer: Festo Model: ZA 101 Machine No.: 2668/S Number of spindles: 3 + crosscut saw Clamping height: 1 x 140 mm + 2 x 30 mm Crosscut saw: 2.5 HP Stop ruler LAS 1750 mm + 1000 mm with turret stop Workpiece clamping: pneumatic Required space approx. 1700 mm x 700 mm x 1400 mm Gbodpfevwffzjx Adteg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as is, as inspected Without warranty or guarantee

Kondisi: baru, Tahun pembuatan: 2017, Exhibition machine Year of manufacture: 2017 (not yet used in production) The Compact Star is a pneumatic gluing star with 5 gluing levels. The rotation is powered by a pneumatic drive with safety indexing. Each level is equipped with 4 adjustable vertical clamps with adjustable counter-bearings. Each vertical clamp is fitted with a hold-down rail. Additionally, each level has 2 adjustable horizontal pressure beams with counter-bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Dimensions: Length: 2700 mm Width: 3117 mm Height: 3096 mm Gjdpfx Aokwg Szsdtsbg Availability: short-term Location: Röllbach