Horizontales Bohr- und Fräswerk

Scharmann FB 100 Opticut

Kondisi: bekas, spindeldurchmesser-125-mm-2024-06 Pedpfxsyt R Anj Adijpw

Tahun pembuatan: 1980, Kondisi: baik (bekas), A very well-maintained, used cycle-controlled lathe from Weisser Heilbronn with SIEMENS control. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel, X-axis: 350 mm Pjdpegyy I Ajfx Adiepw Travel, Z-axis: 1850 mm Spindle nose: DIN 55022, size 8 Number of spindle speeds: 18, 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible torque at spindle: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Multifix quick-change toolpost in front of the centre, size 'C' 4-position turret behind the centre Tool holder Coolant system Travelling steady, pneumatically operated Technical data and dimensions subject to change. A video conference via WhatsApp is possible by appointment.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 1.000 mm, panjang meja: 4.020 mm, lebar meja: 2.010 mm, kecepatan spindel (maks.): 5.000 rpm, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, beban meja: 12.000 kg, berat benda kerja (maks.): 12.000 kg, berat keseluruhan: 29.000 kg, hidung spindel: 200-1200, daya motor spindle: 45.000 W, CENTRO_DE_MECANIZADO_001 Ppedpfx Adsy Tu I Noiow

Tahun pembuatan: 1981, Kondisi: sangat baik (bekas), Faceplate-Durchmesser: 1300 mm Pedpjk Dz N Iofx Adijpw Max. Drehdurchmesser: 1100 mm Drehdurchmesserbereich: 460–1250 mm

Kondisi: bekas, Tahun pembuatan: 2009, en_001 Ppsdpfxjt Rmdze Adijw

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Spindle speed: 7000rpm, spindle power: 50HP, tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24,000kg. An on-site inspection is possible. Ppedpfx Aetx Dn Usdijw

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, berat benda kerja (maks.): 4.000 kg, jumlah slot dalam magazin alat: 120, produsen pengendali: Heidenhain, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 6.000 mm, berat keseluruhan: 12.000 kg, panjang meja: 630 mm, lebar meja: 500 mm, model controller: iTNC530, daya nominal (semu): 61 kVA, pergerakan cepat sumbu Z: 50 m/menit, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 4.000 kg, jam operasional spindle: 19.500 h, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned machining, geometrically within new machine tolerances. The machine can be measured/inspected on site upon request. Machine Data: Machine designation: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Good Equipment: • Direct path measurement in X/Y/Z (glass scales) • Chip conveyor • High-pressure coolant system, 40 bar • Extraction unit • NC rotary table • Tool magazine with 120 stations • Heidenhain touch probe • Rotating viewing window • High-pressure coolant (IKZ) 40 bar • Signal lamp • Chip flushing • Operating mode 4 Technical Data: Number of axes: 5-axis CNC control: Heidenhain iTNC530 NC rotary table clamping surface: 500mm x 630mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travel paths and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm Pedpfx Adjrxrklsiepw C-axis: 360° B-axis: -90°/+12° Feed rate and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor Spindle: Max. speed: 18,000 rpm Interface: HSK A63 Tool Changer: Automatic tool changer: Yes Number of magazine stations: 120 Pallet Changer: 5 pallets

Kondisi: bekas, Tahun pembuatan: 2023, produsen pengendali: Siemens, model controller: 828D - ShopTurn, Beschreibung: Spindel Utama: Teknologi: Spindel Sabuk Putaran: 6.000 rpm Daya (maks.): 18,5 kW Lubang batang: 52 mm Pencekaman benda kerja: Chuck 3-rahang, Samchully MH-206 V1 Pedpfx Adjxybxxsispw Pengangkut alat: Teknologi: Revolver 12 posisi Penjepitan alat: BMT55 Penggerak alat: 5.000 rpm Perlengkapan/Aksesoris: Manajemen chip: Konveyor chip Manajemen pendingin: Pompa IKZ dengan oil skimmer dan tekanan tinggi, 10 bar Pengukuran alat: Lengan pengukur otomatis Otomatisasi: disiapkan Pembuangan bagian jadi: Penangkap bagian dengan kotak penampung Mode penyetelan: Handwheel elektronik

Kondisi: bekas, Tahun pembuatan: 1988, Plate width: 2000 mm Plate depth: 3500 mm Plate height: 270 mm Weight: 5.5 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a live demonstration or creation of a video is not possible. Podjiiii Sjpfx Adiepw Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, it is not possible to provide additional images. +++++

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Centre height 330 mm Centre distance 2000 mm Working range: Max. turning diameter over bed cover 650 mm Max. turning diameter over cross slide 360 mm Main spindle: Spindle diameter in front bearing 140 mm Spindle bore 107 mm Main drive 58.5 kW 2-stage speed range 4 – 750 rpm / 750 – 3060 rpm Feed drive: Ppsdpsx Sx Htsfx Adiow Rapid traverse X/Z-axis 10/10 m/min Turret: Number of tool stations 12 Driven tool stations 6 Tool holder shank VDI 50 mm Dimensions / Weight: Space requirement L x W x H approx. 6400 x 2150 x 2000 mm Weight 9400 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TurnPlus EP 90 with color screen • C-axis spindle orientation • 12-position turret, VDI 50, of which 6 positions for driven tools in SAUTER-manufactured turret, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extractor system by LTA • Various VDI 50 tool holders • CE compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 single/regenerative feedback module, 1 control insert for one axis, 1 control module for two axes inverter servo drive, 1 Simodrive power module for one axis motor Total repair costs: €17,000.00 net Important note: On this very well-preserved CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995) the C-axis positioning does not function and the driven milling unit rotates, but does not lock in place. Otherwise, the machine is in immaculate condition. Demonstration under power possible at any time by prior arrangement. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel