Mesin bubut CNC

Okuma MULTUS B300II-W

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 346 h, jumlah sumbu: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and has rapid traverse rates of 24 m/min in the X axis. If you are looking for high-quality turning and milling capabilities, you should consider the Hurco CNC TMX 8 MYSi turn-mill center. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Maximum turning diameter: 508 mm • Maximum turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Maximum main spindle speed: 4,500 rpm • Maximum sub-spindle speed: 6,000 rpm • Synchron spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW Bodpsym T Itsfx Aaiedg • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar passage: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interrupt capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included, swivel holders are not included.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Commissioning: as Okuma stock machine 09.2017 Control: OSP P300S Machine equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor power 32kW Bdsdpfx Aajyviigsiog Torque 955Nm. ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustment range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1,500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-position tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: High-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum-type filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for lower turret) ▪ Automatic door system ▪ Robot Interface Type E for linking further loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical details ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller linear guides in ZB-axis With slideways in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with travel +150 / -150 = 300 mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20 bar pressure Including bag filter, external coolant supply for tool spindle, pump with max. 3 bar pressure ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measuring device (when using standard chuck) for safe setup ▪ MacMan machine management with integrated production data acquisition (PDA) ▪ Parts program memory 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation through periodic speed variation ▪ Tool height offset in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation +/- 0.1°

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 18.845 h, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 53 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 33.000 W, produsen pengendali: SIEMENS, model controller: 828D, jumlah sumbu: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018 and is designed for precision horizontal turning. This machine is ideal for complex machining tasks, delivering robust performance and durability. If you are seeking high-quality turning capabilities, consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for further information. Additional Equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • The machine includes a rotary indexing magazine • The machine includes a gantry robot Machine Benefits Qualitative Advantages • Tool change time: 1.0 second • Maximum speed (station): 5,000 rpm Bjdpfsyr R A Esx Aaisdg • Tool holder size: 25 x 25 mm • Boring bar holder: Ø50 mm • Coolant pump power: 1.5 kW Technical Advantages • Max. turning diameter over bed: 780 mm • Max. turning diameter over carriage: 630 mm • Max. turning length: 760 mm • Main spindle torque: 719 Nm • Main spindle nose: A2 #8 • Sub spindle speed: 6,000 rpm • Sub spindle power (30 min): 18.2 kW • Sub spindle torque: 220 Nm • Sub spindle nose: A2 #5 • Number of stations: 24 (12 driven) Additional Information Machine still under power.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 3.300 rpm, daya motor spindle: 30.000 W, berat keseluruhan: 9.100 kg, produsen pengendali: MAZATROL, model controller: Mazatrol Matrix, jumlah sumbu: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control system, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power output of 30 kW. The machine is equipped with a chip conveyor and a tool presetting device. If you are seeking high-quality turning capabilities, consider the Mazak QT Nexus 350 II M we have for sale. Please contact us for further information. Additional Equipment • Chip conveyor • Tool presetting device • Autoblock chuck • Tool holders • User and maintenance manuals Machine Advantages Technical Advantages • Maximum turning diameter: Ø 420 mm • Maximum turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: ASA 11" • Chuck type: Autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7.5 kW • Maximum driven tool speed: 4000 rpm Additional Information Bjdpfjx D I Risx Aaijdg Machine still under power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 8.900 h, Fungsionalitas: berfungsi sepenuhnya, Heller HF5500 termasuk Fastems FPT 1000 Heller HF5000 Pusat pemesinan 5-sumbu Kontrol: Siemens Sinumerik SL Spindel: HSK100 Majalah alat: 100 alat Fastems FPT1000 Bedpfx Ajw I Tupoaiedg 18 posisi palet Perangkat lunak perencanaan (shift tanpa operator)

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW Bsdpfx Aasv Ig Avjisdg - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, en Bedpfx Aasy Spuuoijdg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 935 mm, produsen pengendali: OKUMA, model controller: OSP-P200L, jumlah sumbu: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality lathe, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / Tool magazine: 40 positions • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub-spindle: A2-6 nose; 38-5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment Bedpex D Rvhefx Aaijdg • Bar feeder IF • Approximately 60 HSK 63 tool holders • A half pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 115 mm, berat keseluruhan: 6.850 kg, produsen pengendali: OKUMA, model controller: OSP-P300LA, jumlah sumbu: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022 and is distinguished by its robust horizontal turning capabilities. It is equipped with an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and speeds of up to 6,000 rpm, it ensures efficient turning operations. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 EX II, which we have available for sale. Please contact us for further information. • Distance between spindle noses: 1,085 mm Bdsdpfx Aaex D Rvnoisg • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Counter spindle bore: 63 mm • Bar capacity through counter spindle draw tube: 52 mm • Driven tool speed: 45-6,000 rpm Additional equipment: • Iemca KID 80/16 Plus bar feeder (2022) – incl. KID 80 • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double rotary tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER tool holders with approx. 30 ER collets

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 5.785 h, okuma-genos-l300e-my-de Bdodpfx Aezat Tvoaieg