Mesin bubut CNC presisi

Schaublin 102-N80 Combitec

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, windkraftanlagen2027_vestas Pjdpfsywlpxex Aqvsgt

Kondisi: baik (bekas), 1 x Mesin bor meja dengan perlengkapan pembuat ulir. Kondisi prima. Model TB 13 dalam kondisi teknis yang baik. Spesifikasi teknis: Dudukan: BT 16 Kecepatan putar: 200 - 3200 RPM Luas permukaan meja: 260 x 330 mm Aksesori: Pgedpfx Ajwyw Apoqvet 1 x Chuck bor Röhm 1 - 13 mm dengan kunci 1 x Chuck pembuat ulir Mesin dapat diperiksa saat dinyalakan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 3.300 rpm, daya motor spindle: 30.000 W, berat keseluruhan: 9.100 kg, produsen pengendali: MAZATROL, model controller: Mazatrol Matrix, jumlah sumbu: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control system, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power output of 30 kW. The machine is equipped with a chip conveyor and a tool presetting device. If you are seeking high-quality turning capabilities, consider the Mazak QT Nexus 350 II M we have for sale. Please contact us for further information. Additional Equipment • Chip conveyor • Tool presetting device • Autoblock chuck • Tool holders • User and maintenance manuals Machine Advantages Technical Advantages Pjdpjx D I Riefx Aqvsgt • Maximum turning diameter: Ø 420 mm • Maximum turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: ASA 11" • Chuck type: Autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7.5 kW • Maximum driven tool speed: 4000 rpm Additional Information Machine still under power

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), - BEKAS - MESIN BUBUT KONVENSIONAL TINGGI PUSAT: 102 mm JARAK ANTAR PUSAT: 450 mm MAKS DIAMETER PUTAR DI ATAS RANJANG: 200 mm MAKS DIAMETER PUTAR DI ATAS CARRIAGE: 120 mm KAPASITAS BATANG: 25 mm SPINDEL: 50 - 5000 rpm; 3 kW Podsyvlxqepfx Aqvegt KONUS EKOR: CM 2 DIAMETER QUILL: 30 mm LANGKAH QUILL: 80 mm KEPALA MENARA: MULTIFIX DIMENSI KESELURUHAN: 1500 x 510 x 1550 mm

Kondisi: bekas, de_001 Podpfsyqvgmjx Aqvogt

Kondisi: baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Schaublin 102 N - VM, Nomor mesin BL 330699, Psdpfxozlc Apj Aqvjgt Tahun pembuatan sekitar 1993, Mesin dengan poros ulir utama, Tinggi puncak 102 mm, Poros ulir utama: diameter 40 mm, dikeraskan dan ulirnya digiling. Pitch poros ulir utama: 4 mm. Gerakan makan: 8 gerakan memanjang dari 0,02 hingga 0,3 mm/putaran. Rentang ulir: Metrik: 20 pitch dari 0,25 hingga 4 mm. Imperial (inci): 25 pitch dari 80 hingga 6 tpi. Jarak antara pusat 450 mm, Ø putar maks. di atas alas 200 mm, Ø putar maks. di atas support 120 mm, Kecepatan spindle hingga 2.800 rpm, Dudukan tailstock, Aksesori,

Tahun pembuatan: 2000, Kondisi: baik (bekas), Teile, die von Hand gezeigt werden, sind nicht enthalten. Länge: 1350 mm, Durchmesser: 480 mm, Pedopy Eqmjpfx Aqvjgt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Translation: Centre distance: 750 mm Turning diameter: 310 mm Turning diameter over cross slide: 175 mm Spindle bore: 32.0 mm Tailstock quill taper: MT 3 Spindle speed: 85 - 2200 rpm Bed width: 200 mm Spindle mount: DIN 55027 Size 5 Total power requirement: 2.2 kW Machine weight: approx. 710 kg Dimensions (LxWxH): 1884 x 717 x 1262 mm Original price: approx. €20,000 From a university of applied sciences (!!) Pgedoxab Tpspfx Aqvst - In tested condition - machine videos available - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Equipment: - Robust conventional geared-head lathe - 3-jaw chuck, Ø 160 mm, with spare jaws - "NEWALL" digital readout, front left - MULTIFIX tool post with 4 holders - Fixed steady rest - Travelling steady rest - Sliding tailstock - Foot/spindle brake - Machine anti-vibration mounts - Operating manual (PDF/Dutch) * All technical data: - Swing over bed: 310 mm - Centre distance: 750 mm - Swing over cross slide: 175 mm - Spindle bore: 32 mm - Bed width: 200 mm - Spindle mount: DIN 55027 Size 5 - Spindle taper: 4.5 M - Spindle speed: 85 - 2000 rpm - Metric thread range: 0.1 - 28 mm - Module thread range: 0.1 - 1.75 - DP thread range: 4 - 70 - Cross slide travel: 150 mm - Top slide travel: 95 mm - Tailstock quill diameter: 40 mm - Tailstock taper: MT 3 - Tailstock quill travel: 100 mm - Motor power: 2.2 kW - Weight: 770 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstock: Standardized spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 4000 rpm Spindle positioning, increment: 0.1° C-Axis: Programmable increment: 0.001° Pgodpfx Aezb U Epoqvet Spindle clamping force: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Travel on X-axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feed Rates: Working feed (X/Z axes, stepless): 0–5000 mm/min Rapid traverse (X/Z axes): 8/10 m/min Feed force (X/Z axes): 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 AC motor, peak power (intermittent duty): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardized toolholder fixing: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant System: Tank capacity: 120 liters Pump rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i CNC control 1 A2-6 spindle headstock 1 12-station VDI 30 turret for 6 driven tools 1 pneumatically controlled tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 3-jaw chuck 1 Brucker CM5 live center 1 ESX-25 radial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25 without EX nut 1 EWS ESX-25 without EX nut 4 left radial toolholders, short, Form B2, ref 4100.0100 1 ESX-25 collet holder, Form E3 with EX25 nut and Ø 5 mm collet 1 same, without EX25 nut 3 tapping collets Ø 4.5–6 and 8 mm 1 indexable insert drill holder, Ø 40 mm bore, Form E1, ref 4100.00124 1 same, Ø 32 mm bore, ref 4100.00107 1 same, Ø 20 mm bore, ref 4100.00105 1 boring bar holder Ø 8 mm, Form E2, ref 4100.00108 1 same, Ø 10 mm, ref 4100.0109 1 same, Ø 12 mm, ref 4100.0110 2 same, Ø 16 mm, ref 4100.0111 1 same, Ø 20 mm, ref 4100.0112 1 same, Ø 25 mm, ref 4100.0113 1 same, Ø 32 mm, ref 4100.0115 1 same, Ø 32 mm, GARANT, long 5 steel protection plugs, Form Z2, ref 4100.00130 1 left axial toolholder, Force C4, ref 4100.00103 1 pneumatically controlled tailstock support, CM 5, ref 180-65.200 1 stand only for microscope, ref 180-60.005 1 coolant device OPTIONAL ACCESSORY 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref 180-70.200 chf. 2,500.-- + VAT Subject to errors or omissions, the technical information is provided without obligation.

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Pgodpfx Aeu Ix Hdsqvst Tailstock quill stroke: 180 mm Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included