Mesin bubut presisi

Schaublin 102N-VM

Kondisi: bekas, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over carriage: 120 mm Headstock Spindle nose for collets, type Schaublin W25 Spindle bore: 25 mm Collet capacity: 20 mm Gear reduction ratio: 1:5 Bed Height x Width x Length: 168 x 130 x 1000 mm Cast iron bed, trapezoidal profile as per lathe 102 N, with hardened and ground dovetail guideways. Bedpfx Afebxkl To Secu Carriage Maximum travel on bed: 400 mm Tool slide width - length: 80 – 194 mm Hand traverse: 90 mm Centre height above tool slide: 20 mm Tool shank size: 12 x 12 mm Cross slide width – length: 94 – 300 mm Hand traverse: 100 mm Saddle: length of guideways on bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric threads: 0.25 – 4 mm Machine plate for 25 imperial threads: 80 – 6 TPI Tailstock Quill diameter: 30 mm Quill taper: 2 Morse Quill travel: 80 mm Coolant System Coolant tank capacity: 23 litres Net Weights Lathe on workbench, approx. 225 kg Lathe on cabinet base, approx. 550 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 2.340 rpm, kecepatan spindel (min.): 32 rpm, penjepit spindle: MK 4, kedalaman tenggorokan: 293 mm, diameter quill: 72 mm, gores kuas bulu: 145 mm, panjang total: 1.340 mm, tinggi total: 2.050 mm, lebar meja: 225 mm, lebar total: 1.280 mm, panjang meja: 800 mm, kapasitas pengeboran: 50 mm, daya nominal: 2,2 kW (2,99 hp), Drilling and milling machine with 3-axis digital display, drilling capacity Ø 50 mm, motor 2.2/3.0 kW, table size 800x225 mm, infinitely variable spindle speed 32–2340 rpm, MK-4 taper, electronic tapping device, machine lamp, coolant system, dimensions 1340x1280x2050 mm, weight approx. 780 kg. Bsdewn E Sbepfx Af Secu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Schaublin 102N-VM-CF Hochpräzisions-Drehmaschine Schweizer Fabrikat Baujahr: 2005 Max. zugelassener Umlaufdurchmesser über Bett: 200 mm Max. zugelassener Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Leistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querverfahrweg, X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsverfahrweg, Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung für Dreharbeiten Max. Werkzeugquerschnitt (Multifix-System): 10 x 10 mm Stangendurchlass (MULTIFIX-System): Durchmesser 20 mm Reitstock, in Höhe und Seite einstellbar: Innenkegel: MK2 Reitstockaufnahme-Ø: 30 mm Pinolenhub: 80 mm Kühlmitteltank: 23 l Elektr. Anschluss-Spannung: 400 V Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3 Achsen (X-Z-Z1) X-Auflösung: 0,001 mm Z-Auflösung: 0,005 mm Z1-Auflösung: 0,005 mm - Kühlmitteleinrichtung - Rückseitiger Späneschutz aus Blech - Doppeltes Start/Stopp-Pedal und Spindelrichtungsumkehr - Schaublin W25 Spannzangensatz - Guss-Drehfutter W25 Ø110 mm mit Backen - Schnellwechselrevolver MULTIFIX-A mit Haltern - Antriebssystem für Zusatzgeräte mit Riemen Verstellbare und schwenkbare Riemenspannvorrichtung Antriebseinheit komplett mit Motor Bodpfx Afsw N Rh Ae Sscu Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar.

Kondisi: baik (bekas), Right- and left-hand rotation with knee-reversing switch 2-stage variable speed Headstock with reduction gearbox Cross-slide with 90 mm travel Tripan tool holder 1 set W20 collets 2 drawers Lamp 380 VAC Bedpfx Afed Htvdj Sjcu Centre distance: 350 mm Centre height: 102 mm Swing diameter over bed: 200 mm Swing diameter over cross slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / stepless Tailstock quill: MT 2 Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various "Schaublin 102" models available from stock!

Kondisi: bekas, Mesin bubut tuas tangan SCHAUBLIN Tipe 102 Mesin bubut mekanik No. Mesin: 208322 Tahun pembuatan: sekitar 1970 Panjang bed total: 650 mm Tinggi center di atas bed: 102 mm Tinggi center di atas support: 53 mm Kecepatan spindle rata-rata: sekitar 2.800 rpm (3 tingkat kecepatan) Bsdpow Iq Umefx Af Sscu Motor penggerak: 0,37 kW, 2.800 rpm Sambungan listrik: 380 Volt, 50 Hz - Support pemotongan dan grooving tuas tangan dengan stopper yang dapat diatur secara presisi - Pemegang pahat dengan pengaturan tinggi presisi - Perlengkapan collet (hanya tersedia satu collet) - Perubahan kecepatan dengan memindahkan sabuk penggerak Kebutuhan ruang dengan meja bawah L x W x H: 1150 x 600 x 1200 mm Berat dengan meja bawah: 130 kg Kondisi bagus

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: Bcedpfjwvuf Tjx Af Sou For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders Bsdpfsvkfhpjx Af Socu • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Bjdpfx Afsu Aftgo Socu >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Tahun pembuatan: 2017, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 6151550180, Demo Tool: Hydraulic High-Torque Wrench LP2 by TITAN without Cassette Torque Range: 363 to 2476 Nm Drive: Suitable for cassettes (wrench size SW 19 to SW 60) Cassettes are optional and not included in the scope of delivery Weight: depending on cassette from 2.56 to 3.16 kg Overall length with cassette: 226.1 mm Overall height: 31.8 mm Advantages: - Patented Multi-Axis Connection: Freely movable hose, multi-positioning of the hose - Slim design: Fits easily into all tight spaces - Unique wide-track locking pawls - Modular concept Features: - Certified accuracy +/-3% - The Titan WIDE Track ratchet tooth design distributes force evenly, provides a larger contact area, and delivers the power to reliably release any bolt—every time Bcsdpsdv Scfsfx Af Ssu - Handcrafted from the highest quality aerospace-grade materials for ultimate strength and durability (AQ Grade 7075-T6 aluminum alloy) - Low profile and flat design for extremely tight spaces

Kondisi: sangat baik (bekas),