Mesin bubut presisi

Schaublin 180-CCN

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstock: Standardized spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 4000 rpm Spindle positioning, increment: 0.1° C-Axis: Programmable increment: 0.001° Spindle clamping force: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Travel on X-axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feed Rates: Working feed (X/Z axes, stepless): 0–5000 mm/min Rapid traverse (X/Z axes): 8/10 m/min Feed force (X/Z axes): 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 AC motor, peak power (intermittent duty): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardized toolholder fixing: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant System: Tank capacity: 120 liters Pump rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i CNC control 1 A2-6 spindle headstock 1 12-station VDI 30 turret for 6 driven tools 1 pneumatically controlled tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 3-jaw chuck 1 Brucker CM5 live center 1 ESX-25 radial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25 without EX nut 1 EWS ESX-25 without EX nut 4 left radial toolholders, short, Form B2, ref 4100.0100 1 ESX-25 collet holder, Form E3 with EX25 nut and Ø 5 mm collet 1 same, without EX25 nut 3 tapping collets Ø 4.5–6 and 8 mm 1 indexable insert drill holder, Ø 40 mm bore, Form E1, ref 4100.00124 1 same, Ø 32 mm bore, ref 4100.00107 1 same, Ø 20 mm bore, ref 4100.00105 1 boring bar holder Ø 8 mm, Form E2, ref 4100.00108 1 same, Ø 10 mm, ref 4100.0109 1 same, Ø 12 mm, ref 4100.0110 Bodpfjzb U Epsx Afpoll 2 same, Ø 16 mm, ref 4100.0111 1 same, Ø 20 mm, ref 4100.0112 1 same, Ø 25 mm, ref 4100.0113 1 same, Ø 32 mm, ref 4100.0115 1 same, Ø 32 mm, GARANT, long 5 steel protection plugs, Form Z2, ref 4100.00130 1 left axial toolholder, Force C4, ref 4100.00103 1 pneumatically controlled tailstock support, CM 5, ref 180-65.200 1 stand only for microscope, ref 180-60.005 1 coolant device OPTIONAL ACCESSORY 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref 180-70.200 chf. 2,500.-- + VAT Subject to errors or omissions, the technical information is provided without obligation.

Kondisi: diremaj di bengkel (bekas), Informasi Produk "Voest Alpine DA 160" Mesin bubut dengan spindel utama dan spindel geser Voest Model DA 160 Kondisi: Direkondisi Data Teknis Tinggi antara puncak: 165 mm Jarak antara puncak: 650 mm Diameter bubut di atas landasan: 330 mm Diameter bubut di atas eretan silang: 190 mm Lebar landasan: 210 mm Diameter spindel utama: 25 mm Diameter chuck: 160 mm Dudukan luncur kepala: MK 3 Kecepatan putar (16): 30 - 2500 1/menit Daya motor: 2 / 2,4 kW Langkah luncur: 100 mm Dimensi (P x L x T): 1500 mm x 900 mm x 1650 mm Perlengkapan: - Protokol geometri - Tampilan digital 3 sumbu, merek Sino - BARU - Chuck 3 rahang - Tombol berhenti darurat - Sistem dudukan pengganti cepat Multifix, jumlah dudukan 6 - Lampu mesin BARU Bedpfx Afoy Ndqrjpoll - Penahan landasan - Sistem pendingin BARU - Chuck bor dengan konus - Mata pusat yang berputar - Penutup spindel utama dan spindel geser BARU - Pelindung chuck, sakelar batas diamankan - Peralatan pengoperasian - Buku panduan pengoperasian - Kaki mesin

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Control: Fanuc Series 20-T Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Spindle speeds: 5,000 rpm Blodpjzb R Iasfx Afpsl 8-station turret Minimum quantity lubrication

Kondisi: bekas, Tahun pembuatan: 2006, MESIN BUBUT DOOSAN DAEWOO PUMA 240 TAHUN INSTALASI PERTAMA: 2007 CNC FANUC Seri 21i – TB MESIN DALAM KONDISI SEMPURNA SEPERTI BARU, TERHUBUNG DAPAT DITEST APA SAJA DIAMETER CHUCK: 220 MM DIAMETER MAKS. BERPUTAR DIATAS MEJA: 550 mm DIAMETER MAKS. BERPUTAR DIATAS KERETA: 390 mm DIAMETER MAKS. YANG BISA DIBILAS DI MEJA: 350 mm PANJANG MAKS. YANG DAPAT DIBILAS DARI CHUCK: 562 mm UKURAN LUBANG BATANG: 65 mm KECEPATAN SPINDEL: 45 – 4.500 RPM DAYA MOTOR SPINDEL: 15 / 18,5 KW JARAK GERAK: X: 242 mm Z: 580 mm MAGAZIN ALAT: 12 POSISI CONVEYOR SERPIHAN PRESETTING LENGKAP DENGAN SEMUA DOKUMENTASI Bodjyuqacspfx Afpoll

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), - BEKAS - MESIN BUBUT KONVENSIONAL TINGGI PUSAT: 102 mm JARAK ANTAR PUSAT: 450 mm MAKS DIAMETER PUTAR DI ATAS RANJANG: 200 mm MAKS DIAMETER PUTAR DI ATAS CARRIAGE: 120 mm KAPASITAS BATANG: 25 mm SPINDEL: 50 - 5000 rpm; 3 kW KONUS EKOR: CM 2 DIAMETER QUILL: 30 mm Bsdpfxjyvlxqe Afpell LANGKAH QUILL: 80 mm KEPALA MENARA: MULTIFIX DIMENSI KESELURUHAN: 1500 x 510 x 1550 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 165 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 700 mm, tinggi total: 2.250 mm, lebar total: 2.360 mm, produsen pengendali: FANUC, panjang produk (maks.): 3.880 mm, jumlah sumbu: 8, Mesin DN SOLUTIONS PUMA TT2100SYY 8-sumbu ini diproduksi pada tahun 2023. Kondisi seperti baru, model pameran. Konfigurasi mesin ini dilengkapi dengan dua spindle dan dua turret, dengan kecepatan maksimum spindle 5.000 rpm dan kapasitas bar feeder 65 mm. Mesin ini memiliki 24 stasiun turret dan panduan linier rol berkekuatan tinggi untuk stabilitas yang ditingkatkan. Jika Anda mencari solusi turning berkualitas tinggi, pertimbangkan pusat turning-milling DN SOLUTIONS PUMA TT2100SYY yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Ukuran chuck: 8" (204 mm) • Kapasitas bar: 65 mm • Sumbu X1/X2: 165 / 100 mm • Sumbu Z1/Z2: 700 / 700 mm • Sumbu Y1/Y2: 30 / 40 mm • Daya motor spindle: 22 / 18,5 / 15 kW • Stasiun turret: 24 (12 + 12) • Antarmuka turret: BMT 55 • Tipe jalur pemandu: Panduan rol linier berkekuatan tinggi • Tipe spindle: Spindle motor terintegrasi dengan kisaran putaran besar • Kapabilitas turret: Turret atas dan bawah dengan sumbu Y, masing-masing 12 stasiun driven • Struktur: Konstruksi sumbu Y yang sangat stabil untuk produksi massal Perlengkapan Tambahan • Pendinginan dan filtrasi: Pendingin tekanan tinggi melalui turret; pemisah oli • Fitur counter spindle: Pendingin melalui counter spindle; pendorong benda kerja • Penanganan benda kerja: Penangkap benda; konveyor benda untuk kedua spindle • Kalibrasi: Alat pengukur alat (otomatis-elektrik) • Otomatisasi dan antarmuka: AC (lemari kontrol); antarmuka bar loader; menara lampu 3 warna • Opsional: Konveyor serpihan (conveyor sabuk engsel). Harga atas permintaan • Mesin dikirim dengan paket dasar standar: Kepala turret lengkap dengan dudukan dasar. • Opsional: • 5 pcs dudukan alat turning luar SQ20, BMT 55 (500-0696) Bedpfoyrtbqex Afpjll • 2 pcs dudukan alat turning frontal R/L (500-0701) • 1 pc dudukan turning luar ganda HS/GS (500-0868) • 2 pcs dudukan turning luar ganda HS (500-0705) • 1 pc dudukan pahat grooving (500-0709) • 7 pcs dudukan boring bar; BMT 55 ID 32 (500-0698) • 2 pcs dudukan alat turning dalam tiga kali GS (500-0707) • 2 pcs penutup IK (500-0711) • 1 set sleeve adaptor bor (tidak diketahui nomor part) • 2 set sleeve adaptor OD 32 ID 20/25 (500-0710) • 1 set adaptor PRECI-FLEX ER25 (BMT 55P) (500-0523) • 2 pendingin eksternal sudut berpendingin luar merek Eppinger • 2 pendingin eksternal lurus berpendingin luar merek Eppinger Informasi Tambahan Kondisi seperti baru, model pameran Spesifikasi Teknis Counter Spindle: Ya Driven Tools: Ya

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 25.000 h, berat keseluruhan: 3.900 kg, produsen pengendali: FANUC, model controller: 0i-TD, jumlah sumbu: 4, This 4-axis DOOSAN LYNX220LSYA horizontal turning center was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking for high-quality turning capabilities, you should consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for further details. Machine Benefits Qualitative Machine Benefits • Adapter/housing set for internal machining • Preciflex live tool additional adapter set • A set of barely used tools is available at an additional cost. Technical Machine Benefits • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) • Face machining holder Bjdpsx D I T Rjfx Afpell • Internal machining holder • Double external turning tool holder (both sides) • Triple internal machining holder • Axial live tool holder (left side) • Axial live tool holder (left side) • Radial live tool holder Additional Information Machine still under power

Kondisi: bekas, Tahun pembuatan: 1982, de2hu_lathe_spec Bjdpfx Asvzn Itefpell

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 15.845 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6E182501, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, daya motor spindle: 22 W, Mesin sangat terawat, 90% produksi dioperasikan oleh satu orang. Servis dilakukan sesuai rekomendasi pabrikan. Bedpfjyvtugjx Afpoll

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 700 mm, kecepatan spindel (maks.): 1.500 rpm, kecepatan spindel (min.): 5 rpm, panjang pemakanan sumbu X: 1.200 mm, panjang umpan sumbu Y: 2.000 mm, panjang umpan sumbu Z: 700 mm, kecepatan pemakanan sumbu X: 1.000 m/menit, laju pemakanan gandar Y: 1.000 m/menit, laju pemakanan sumbu Z: 1.000 m/menit, lebar total: 4.000 mm, San Rocco horizontal boring mill, fully overhauled, from a high-quality aerospace production facility. CNC control Siemens SINUMERIK 840D with SIMODRIVE 611 drive system. The machine is equipped with modern digital drives and is suited for high-precision multi-axis machining in continuous operation. Overhauled in 2024, the machine received brand new telescopic covers on all axes, as well as numerous other essential refurbishments on the hydraulics, CNC control, hoses, and all types of seals. The machine comes fully equipped, including coolant system, etc. Travel distances: X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical/spindle axis): 700 mm Spindle data: Boring spindle diameter: 100 mm Tool holder: ISO 50 Milling spindle diameter: 185 mm Axial spindle travel: 700 mm Feeds and rapid traverse: Automatic feeds, spindle and vertical axis: 2 × 1,000 mm/min Rapid traverse, spindle and vertical axis: 5,500 mm/min Clearances: Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance spindle nose to table center: 1,850 mm Spindle speeds: Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gear steps: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table specifications: Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table feeds: Automatic feeds X and Y each 1,000 mm/min Rapid traverse X and Y each 5,500 mm/min Bljdpfx Afjx Rhlcjpel Rotary table movement: Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive system: Siemens SIMODRIVE 611 E R Module: 36/47 kW LT modules: 108 A and 2 × 25 A Lifting data and transport: Group 1: Steel bar, diameter 70 mm, length 1,600 mm Steel bar, diameter 70 mm, length 2,400 mm Four distance rings for lifting slings Four steel cables, diameter 22 mm Weight approx. 12,500 kg Group 2: Two steel cables, at least diameter 18 mm Weight approx. 3,500 kg Group 3: Manual lifting Weight approx. 1,300 kg Condition: The machine is in very good technical condition and can be inspected and tested under power by appointment.