Mesin penyeimbang

SCHENCK HM60U

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request. Kwodsxmhdnspfx Ac Hsu

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Kedpfoifi D Tjx Ac Hjwu Die Maschine kann nach Terminvereinbarung besichtigt werden. Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, diameter meja: 1.600 mm, diameter benda kerja (maks.): 2.000 mm, berat keseluruhan: 25.000 kg, CNC vertical turning machine YOUji VTL1600ATC+C Control system: FANUC 18i-TB Year of manufacture: 2014 Specifications Driven tools BT-50, 2400 rpm Table load capacity: 8,000 kg 4 heavy-duty chuck jaws Box slideway construction Chip conveyor Oil chiller Coolant system Tool package optionally available Automatic lubrication Max. turning diameter: 2,000 mm Table diameter: Ø 1,600 mm Horizontal travel of support: 1,015 mm Ram stroke (left): 800 mm Tool changer: 16 positions Kwjdeyimptepfx Ac Hou Load more specifications Approximate dimensions: Length: 4,500 mm Width: 5,500 mm Height: 5,800 mm Weight: 25,000 kg Please note: The information on this page was compiled to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute any representation or contractual terms. We recommend verifying all critical details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, CMZ TD45Y (2019) CNC LATHE WITH LIVE TOOLING AND “Y” AXIS Z 2,250 CNC FANUC 32i B 15” Color LCD Manual-Guide -Swing over bed: 950mm -Swing over carriage: 715mm -Max. turning diameter: 550mm -Max. turning length: 2,200mm -Axis travels: X: 380mm Y: +80 / -60mm Z: 2,200mm -Chuck diameter: 315/400mm -Bar capacity: 127mm -Spindle nose: ASA 11” A2 -Turning head: 2,200 rpm - 51kW (S3 25%) / 39kW (S1) -Max. torque: 3,600 Nm (Max), 3,000 Nm (S2 25%), 2,000 Nm (S1) -Powered turret: 12 stations (16 total) (1-station index in 0.25 sec) -Tool size: 25 x 25mm (diameter 50mm) -Live tools power: 13.7 / 11kW, 12,000 rpm -C-axis indexing: 0.001mm INCLUDED EQUIPMENT: -3-jaw hydraulic chuck CGH-21, Ø530mm -C axis 360° (0.001° indexing) -Tool presetter -Integrated tailstock -Programmable tailstock -High-pressure pump 30 bar -Chip conveyor Kodpeyklzmsfx Ac Hewu -Preparation, base and logic for steady rest -Programmable hydraulic steady rest SMW AUTOBLOK SLU-X-4-ZS (30–245 mm) -Set of internal/external tool holders and powered tool holders -Set of CMZ and FANUC manuals CONDITION: Machine in excellent (like-new) condition. Can be seen in operation. Immediate delivery.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de_Schenck_-_Schenk_Wuchtmaschine_H_50_V/B_gebraucht_mit_Messein heit_CAB_690_H__Aufrüstung_auf_neues_CAB_920_möglich_(Aufpreis_18 .000–20.000_€). Kjdpfx Aox Ein Sjc Howu Die Maschine wird mit den originalen Fundamentzeichnungen, Dokumentationen und Betriebsanleitungen geliefert. Ein Probelauf der Maschine ist in Kerava möglich. Rotor-Kapazität: - Rotorgewicht: 20 – 6.000 kg - Max. symmetrische Belastung auf Lagersockel: 7.500 kg - Max. symmetrische Belastung auf Ständerlagern: 3.750 kg - Beladung mit geringeren Gewichten ist unter Einhaltung der empfohlenen Verfahren möglich. - Max. Rotorgewindelänge zwischen Lagersockeln: 1.600 mm (Riemenantrieb) - Max. Durchmesser über Maschinenbett: 2.100 mm - Spannbare Rotordurchmesserbereiche: 25–180 mm, 180–380 mm - Maschinenbettenlänge: 3.500 mm - Auswuchtgeschwindigkeit n abhängig vom Massenträgheitsmoment des Rotors, auszuwählen zur Vermeidung von Überlastung des Antriebs. - Zulässiger maximaler G·n²-Wert: 1.400 × 10⁶ kg/min² - Gilt für einen steifen, symmetrischen Rotor auf Lagersockeln. - Darf bei dynamischen Tests mit flexiblen Rotoren und Festigkeitsprüfungen überschritten werden. - Stirnantrieb / FU-Motor: 7,5 kW - 4-Gang-Getriebe: 120–2.520 U/min - Riemenantrieb BU 5 / FU: 7,5 kW - Unwucht Umar 0,5 gmm/kg: 0 gmm/Ebene

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin Gerinda Roda Gigi Reishauer RZ303 Kwedpfexz E S Eex Ac Hou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 5.040 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.250 mm, diameter putar di atas sled silang: 420 mm, diameter pembubutan: 420 mm, kecepatan spindel (min.): 35 rpm, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 80 mm, jarak gerak sumbu Z: 1.250 mm, gerak cepat sumbu X: 33 m/menit, pergerakan cepat sumbu Z: 33 m/menit, Diameter batang (maks.): 80 mm, MAZAK QUICK TURN 300 Smart Operating hours: Automatic cycle: 5,040 hours Condition: Very good condition, regularly serviced and consistently maintained! Capacity & Working Area Max. swing diameter: D 720 mm Max. turning diameter: D 420 mm Max. bar capacity: D 80 mm Max. machining length: 1,200 mm Main Spindle Max. spindle speed: 4,000 rpm Spindle nose: JIS A2-8 Rated power (40% duty cycle): 26 kW Max. torque: 750 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Tailstock Taper: MT NC axis, pressure control via M-codes Max. axial pressure: 10,000 N Dimensions & Weight Machine dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 through-hole chuck Chip Management Mayfran hinge belt chip conveyor Coolant pump 8 bar & chip wash General Specification: SD MEMORY I/F(1P) + USB MEMORY I/F(1P) Kwsdpfxswzkvfe Ac Hju Mazak standard color NC-controlled tailstock Tailstock pressure adjustment Tailstock with fixed center (650U/1250U) Operator door with interlock switch Double foot switch Fully enclosed work area Work area lighting Global safety standards Complete coolant system Chuck status monitoring Automatic tool eye 10.4" color display EIA/ISO package LAN interface

Kondisi: bekas, Tahun pembuatan: 2007, de-technische-details-wuchtmaschine Kwedpfxsvc Apzo Ac Hou

Kondisi: bekas, Tahun pembuatan: 2005, Machine weight approx. 7,800 kg Space requirement approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gear: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Spindle taper in milling spindle: HSK-D63 Kwjdpfx Acsudc S He Hju - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X axis): 180 mm - Column swivel (B axis): -1 to +11 degrees Machine - workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - X-axis feed rate: 12,000 mm/min - Workpiece table (C axis): 0-400 rpm - Cutter (C2 axis): 0-300 rpm - Spindle stroke (A axis): 500-3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Connected load of the machine: 35 kVA - Cable cross-section: 35 mm² - Fusing: 80 A

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 640 mm, daya motor spindle: 15.000 W, tinggi total: 2.120 mm, berat keseluruhan: 7.100 kg, panjang produk (maks.): 2.542 mm, jumlah sumbu: 3, This 3-axis horizontal lathe, CMZ TA-20TY-640, was manufactured in 2023. It features a maximum turning diameter of 460 mm, a turning length of 640 mm, and a robust 15 kW spindle delivering up to 4,000 rpm. The machine offers a Y-axis travel of / mm, 15 driven tools with speeds up to 12,000 rpm, and a bar capacity of 66 mm. Take advantage of the opportunity to purchase this CMZ TA-20TY-640 horizontal lathe. Contact us for more information about this machine. • Max. turning diameter – 460 mm • Max. turning length – 640 mm • Swing over bed – 760 mm • Swing over saddle – 600 mm • Y-axis travel – mm • Bar capacity – 66 mm • Chuck size – A2-6" • C-axis – 0.001° • Number of tools – 15 • Driven tools – 15 • Driven tool power – 8.1 kW • Driven tool speed – 12,000 rpm • Tailstock taper – MT3 • Spindle hours – Less than 1,500 h (to be confirmed) Kodpsx H U Dwjfx Ac Hewu Additional equipment: • Chip conveyor – Yes, side discharge • Tool presetter – Yes • Automatic tailstock slide – Yes • Automatic doors – Yes • High-pressure coolant pump – 6 bar • Robot interface – Yes • Set of tool holders – Yes • Spindle cooling (cooling unit instead of air/oil heat exchanger) – Yes • Filtration – 90 µm