Mesin bubut presisi otomatis

Scherer Feinbau S1- So/KA 40

Kondisi: baik (bekas), Tahun pembuatan: 1979, Model engineering milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model engineering mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle mount: SK30 - Drive: 1.1 kW Kdodsnzpx Rjpfx Ac Hoh - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Kondisi: baik (bekas), Tahun pembuatan: 1956, Heavy-duty lathe, engine lathe, turning lathe, geared head lathe -Manufacturer: Weisser, geared head lathe type PF200 -Turning length: 1340 mm -Swing over bed: 420 mm -Swing over cross-slide: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 – 1400 rpm -3-jaw chuck: Röhm Ø 250 mm -Accessories: included, see photos Kdjdpfetzf N Rex Ac Heh -Tailstock taper: MT4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Kedpfsvbhv Rsx Ac Hedh Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Tahun pembuatan: 2007, Kondisi: baik (bekas), nomor mesin/kendaraan: 1380-1207, mit Siemens Sinumerik Bedienpanel mit Späneförderer Bedienpult Elektroschrank Spindeldurchlass 60 mm Kdjdpfxem Nb Rio Ac Hoh max. Werkstücklänge 340 mm

Kondisi: baru, Center distance ----- 1000 mm Center height ----- 230 mm Swing diameter ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES * 3-axis digital readout, brand SINO Kedpjk Iug Tjfx Ac Hsdh * Quick-change tool post, type Multifix TOOB2 with 4 holders * 3-jaw self-centering chuck 250 mm * 4-jaw independent chuck 320 mm * Faceplate 350 mm * Fixed and traveling steady rest * LED work light and coolant system * Electric brake (CE) * Foot brake * Box with various tools

Kondisi: bekas, Tahun pembuatan: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length 200 – 640 mm Control: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight approx. 5 t Space requirement approx. 8.5 x 2.8 x 2.35 m Hydraulic cut-off and double-ended machining machine suitable for the pre-processing of trapezoidal thread spindles and other round workpieces, including cutting from bar stock and both-end machining such as chamfering, face milling, and drilling on stationary parts with rotating tools. The machine consists of: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar feeder for bar length 2 – 3.5 m - Standard version for solid bars up to 40 mm diameter - Central positioning of bar feed rollers - Bar loading unit - Standard feed gripper - Indexing turret with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Turret swivels in both directions - Sawing unit with worm drive TR 200.00, stroke 100 mm - Saw blade: 350 mm, speed 25/39 rpm - Motor power: 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW Kodpfovp Sd Ijx Ac Hjdh - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds: 360/720 rpm, 1.8/2.8 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Machining unit no. 3 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds: 943/1882 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Discharge chute - Metric ruler rails for all adjustment movements - Hydraulic system with delivery pump SAUER SUNDSTRAND - Accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical system in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine lamp - Signal beacon for machine downtime indication - Central lubrication - Chip conveyor In 2011, a comprehensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc., were replaced. The machine has hardly been operated in recent years, with total operating hours estimated by the owner at approx. 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Rotationskorb-Teilewaschmaschine für Motorblöcke und -teile – Neumaschine Technische Daten: Korbdurchmesser: 900 mm Beladehöhe: 450 mm Beladekapazität: 300 kg Tankinhalt: 80 l Pumpendruck: 2,5 bar Pumpenleistung: 3,0 PS Heizleistung: 7,5 kW Elektrischer Anschluss (V/Ph/Hz): 220-380-415/3-1/50-60 Timer: 0 – 90 min. Arbeitstemperatur: 0–90 °C Verpackungsmaße: 1450 x 1080 x 1340 mm Verpackungsgewicht: 300 kg Hauptabmessungen: B x L x H: 1.100 x 1.100 x 1.150 mm Maschinengewicht: 350 kg Die Teilewaschmaschine ist auch in größeren Ausführungen erhältlich! Größere Maschinen: AWM1250: mit 1.150 mm Korbdurchmesser und 200 l Tankinhalt AWM1500: mit 1.350 mm Korbdurchmesser und 300 l Tankinhalt Bei Interesse kontaktieren Sie mich bitte! Kdodpfoncfmvex Ac Hoh Weitere Maschinen im Angebot: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Ventilschleifmaschinen, Zylinderkopf- und Motorblock-Planmaschinen, Ventilsitz-Fräsmaschinen, Druckprüfgeräte, Teilewaschmaschinen

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 1.030 kg, diameter putar di atas sled silang: 320 mm, saluran batang: 56 mm, daya motor spindle: 3.700 W, diameter pemasangan: 16 mm, kecepatan rotasi (maks.): 2.500 rpm, lubang spindel: 56 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 150 rpm, panjang pembubutan: 750 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Technical Specifications Distance between centres 750 mm Centre height 160 mm Swing diameter over bed 320 mm Swing diameter over cross slide 150 mm Bed width 215 mm Spindle bore 56 mm Spindle mount A2-5 Stepless speed range 150 - 2500 rpm Travel X-axis / Z-axis 160 mm / 750 mm Rapid traverse X / Z axis 4 / 7 m/min Number of tool stations 6 pcs. Tool shank dimensions 16 x 16 mm Positioning accuracy ± 0.01 mm Quill diameter Kdedpfjwh Aiwsx Ac Hsh 45 mm Quill travel 100 mm Quill taper MT 4 Motor power 3.7 kW Machine dimensions (W x D x H) 1910 x 1150 x 1840 mm Approx. weight 1030 kg

Kondisi: baru, Centre length ----- 1000 mm Centre height ----- 160 mm Swing diameter ----- 320 mm Spindle bore ----- 38 mm Bed width ----- 180 mm Spindle speed ----- 65-1810 rpm Motor ----- 1.5 kW Weight ----- 560 kg INCLUDES * 3-axis digital readout, brand SINO * Multifix TOOE5 quick-change tool post with 4 tool holders * 3-jaw chuck 160 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rests * Foot brake (CE) * Electric brake (CE) Kdodpfxerpn Uie Ac Hsh

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), The Polygim Mini 88 is an extremely compact and user-friendly machine, specifically designed for the efficient machining of simple parts. With its space-saving design and robust, durable construction, it offers a perfect solution for workshops with limited floor space or for integration into existing production lines. Description Technical Data Unit Machine Kdsdpfx Acowpgiwe Hoh Poly Gim MINI-88 2-axis CNC lathe with Fanuc 0iTF Plus control Spindle Max. spindle speed 100 – 5,000 rpm Max. machining diameter (with chuck) Max. machining diameter (with collet) 60 mm Max. machining length 120 mm Spindle motor 100% duty cycle – 2.2 kW / 50% duty cycle – 3 kW Turning diameter 60 mm Turning length 120 mm Bar capacity 26 mm Travel X-axis 150 mm Y-axis 170 mm Tooling Tool holder 16 x 16 Ø 20 mm mm Hydraulic chuck 4" Smallest programming increment 0.001 mm Accessories Including RS232 and PCMCIA interface Stroke diagram Box guideway in Z-axis Chip conveyor Hydraulic hollow clamping device for chuck and collet system Chuck Ø 100 mm Parts catcher 8-station turret and linear system Centralized lubrication Coolant pump