SCHLATTER LINI PENGELASAN JARING MG 24.1/8C

SCHLATTER MESH WELDING LINE MG 24.1/8C

SCHLATTER MG24 Welded Wire Mesh Production Line

Completely Refurbished

WORKING RANGE

Panel width: max. 2,500 mm
Cross wire length: min. 900 mm
Cross wire length with QF5 distributor: min. 300 – 1,600 mm
Maximum spacing between outer longitudinal wires: 2,400 mm
Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm
Minimum spacing between longitudinal wires: 100 mm
Cross wire spacing: 25–250 mm
Adjustable via cutting device (0–1)
Longitudinal wire diameter: 4.0 – 12.0 mm
Cross wire diameter: 4.0 – 12.0 mm
Maximum number of longitudinal wires: 24

MG 24.1/8C MESH WELDING MACHINE – Basic configuration including:

- 1 Machine base frame
- 1 Upper support for reception of press units, continuously adjustable by handwheel
- 1 Magnetic support unit with holding magnets and cross wire monitoring
- 1 Row of pneumatic solenoid valves for operation of the press units
- 1 Air and water installation
- 2 Pneumatic rotary drives with oil damping
- Static torque with 5 bar compressed air: 480 Nm
- Continuously adjustable front section: 25 – 250 mm, adjustable via cutting device (0–1)
- 1 Feed trolley with panel lifting device
- 1 Tool kit for machine adjustment

WELDING SECTION including:

8 Type C transformers
Rated power per transformer: 100 kVA
Secondary open-circuit voltage: 7.1 V
Rated secondary current: 14 kA
8 ES 130 thyristor contactors
12 Welding presses: 5.0 kN
12 Longitudinal wire current bridges for wire spacing: 50–100 mm
12 Longitudinal wire current bridges for staggered wires: 100 mm
10 Longitudinal wire current bridges for wire spacing: 100–150 mm
8 Longitudinal wire current bridges for staggered wires: 150 mm
6 Longitudinal wire current bridges for wire spacing: 150–200 mm
6 Longitudinal wire current bridges for staggered wires: 200 mm

24 Bottom copper electrode holders with standard angled electrodes, each with a water-cooled current cable, width: 58 mm
24 Wire clamping jaws

Panel width: max. 2,500 mm
Cross wire length: min. 900 mm
Cross wire length with QF5 dispenser: min. 300 – 1,600 mm
Max. spacing between outer longitudinal wires: 2,400 mm
Njdowu Tu Depfx Aahjdf
Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm
Min. spacing between longitudinal wires: 100 mm
Cross wire spacing: 25–250 mm
Longitudinal wire diameter: 4.0 – 12.0 mm
Cross wire diameter: 4.0 – 12.0 mm
Max. number of longitudinal wires: 24

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.