Beli Mesin press kaleng bekas (6)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS Drum Press Auto is ideally suited for compacting 30 to 220 liter steel drums, but it can also easily compress plastic and cardboard drums. In many cases, these compressed recyclables can even be remarketed. The drum press is especially notable for its reliability and ease of operation. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the materials are properly fed back into the recycling process. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Press cycle time: 40 seconds Motor: 11 kW, 32 Amp Power supply: 380–400 V (3 phase) Noise emission: 68 dB Automatic control with fully automated press cycle 30-liter drip tray with drain tap Press plate with spikes for piercing drums to release air during compaction Highest safety standards through a fully enclosed housing Suitable for 30 to 220 liter steel tight-head drums, plastic drums, and cardboard drums Premium quality product "Made in Europe" Designed for compacting: Steel drums Plastic drums Cardboard drums Fiber drums and paper drums Bcsdpfx Ahjc Spguewjw Optional features: Annual maintenance with UVV inspection Custom machine color according to RAL Press insert for cans, oil, and air filters

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS drum press is ideally suited for compacting steel drums from 30 to 220 liters, and it can also easily compress plastic and cardboard drums. In many cases, the compacted recyclable material can subsequently be marketed again. The drum press is especially noted for its reliable and easy operation. By compacting these waste/recyclables, you achieve up to 90% volume reduction, significantly lower your disposal costs, and ensure the proper return of the material to the recycling stream. Press force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever operation 30-liter drip tray with discharge tap Pressing plate with spikes for venting drums during the compaction process Maximum safety standards thanks to fully enclosed housing Suitable for 30 to 220 liter tight head steel drums, plastic drums, and cardboard drums A quality product "Made in Europe" Bsdpfx Ahozdr Towecw Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber drums and paper drums Additional options Annual maintenance with safety inspection (UVV) Machine color according to RAL AUTO control with automatic press cycle Press insert for cans, oil, and air filters Drum press for metal, plastic, and cardboard drums

Kondisi: bekas, Horizontal hidrolik pemadat tong Bsdpfx Aopyncashwscw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, gaya penekanan: 200 t, daya: 0,045 kW (0,06 hp),

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 9.500 kg, lebar bukaan pengisian: 420 mm, panjang bukaan pengisian: 1.250 mm, Technical data baling press / can compactor / sheet metal press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput (empty beverage cans): - with one press stroke: approx. 1.7 t/hour - with two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1200 kg/m³ Hydraulic oil tank capacity: 850 l Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Bcsdpju Th S Sjfx Ahwsw Material suitability: According to the manufacturer, this machine is suitable for pressing sheet metal cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition—see the functional video after the overhaul—and is sold with a 12-month OBM parts warranty. Remarks: Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection is possible by appointment. We do not accept liability for the technical data or potential errors.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-MF60HD Special Baler is ideally suited for compacting challenging and tough materials such as cans, PET bottles, metal buckets, and other tin containers. It also efficiently reduces plastics to a minimum volume. This specialist baler impresses with its ease of operation and large feed opening. Finished bales can be easily removed using the automatic bale ejector. By compressing these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and return the material to the recycling loop in a compliant manner. Pressing force: 13 tons Bale weight: 25 - 60 kg (depending on material) Bale size: 650 H (variable) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Feed opening: 600 W x 400 H mm Press cycle time: 25 seconds Motor: 2.2 kW, 16 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB Bodpfsbhy Twsx Ahwjcw User-friendly lever operation Bale ejector for easy bale removal Retainer claws to minimize material spring-back Cross-tying ensures secure containment of materials in finished bales Holder for 7 rolls of strapping A quality product “Made in Europe” Suitable for compacting: PET bottles Cans and tin containers Canisters and plastic containers Cardboard and film Additional options: Annual maintenance with safety inspection (UVV) Machine color according to RAL Strapping bands Power supply 380 - 400 V (3 phase) PET baler, PET bottle baler, can press, can baler, special baler, baler, paper baler, waste paper baler, cardboard baler, carton baler, film baler, paper bale press, waste baler, waste press, recycling press, waste compactor, residual waste press