Manipulator penanganan pengangkat vakum

Schmalz 500 kg und 2000kg Hebeleistung

Kondisi: bekas, • Load capacity: 350 kg • 6 adjustable suction cups, 250 mm diameter • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley Ijdexnvq Ejpfx Afioia • 4 units available, brand new and unused • Available for immediate delivery IV: + Design standards 1. The design of the unit strictly complies with the European CE standard EN13155:2016, the American ASME B30.20-2006 standard, and the German UVV18 standard, with key structural performance data exceeding those of the above standards. 2. Safety factor: The main structure is rated at 4.0, the safe vacuum level is 65%, and the standard is 85%, which is 20% above the safety norm. V+ Equipment Testing and Standards 1. General a) Checks for completeness of materials, painted or scratched surfaces, suction cup damage, or pipe damage. 2. Points checked before leaving the factory: © Equipment suction test © Pressure hold test © Alarm test © Various control components • Price on request

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 50 l, warna: merah, berat keseluruhan: 2.600 kg, berat kosong: 2.500 kg, daya angkat: 1.000 kg/m, tinggi angkat: 3.310 mm, kondisi ban: 100 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, volume sekop: 0,4 m³, lebar bucket penggalian: 160 mm, Tahun pembuatan: 2025, kapasitas angkut: 980 kg, Perlengkapan: boom yang dapat disesuaikan, garpu palet, hidrolik, kabin, kopling trailer, kunci diferensial, lampu depan tambahan, pelindung kepala, penggerak semua roda, sekop standar, The H&R 2210-T telescopic loader is equipped with the new 3-cylinder Perkins turbo engine, offering 18.5 kW (built in Mannheim, Germany), which meets the Euro 5 standard even without a diesel particulate filter. The new turbo engine is exceptionally economical, and with the 2-stage hydrostatic drive, it achieves a top speed of approx. 16 km/h. Thanks to its generous steering angle of 42° and tight turning radius, it is highly maneuverable even in confined spaces. The 2210T wheel loader with telescopic boom comes standard with a quick-attach pallet fork and a standard bucket, allowing you to start work immediately. The additional hydraulic circuit enables the use of various attachments for the farm loader. The telescopic arm gives the 2210-T excellent reach. The electronic gear control (E-Gang) on the joystick makes operation particularly comfortable. H&R loaders are thoroughly optimized both technically and visually at our facility and undergo comprehensive quality checks. In addition, each machine receives extensive corrosion protection treatment. Our loaders are CE-compliant in accordance with the EU Machinery Directive. TUV Süd certification for individual operating approval in accordance with §21 StVZO (road approval / operating permit as self-propelled work machine) is available for our machines. Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) Iijdpsul Af Djfx Afiea • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cabin • Incl. pallet fork • Incl. standard bucket 150 cm • Joystick with float position and E-Gear • Auxiliary hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Rear-view camera with display • Rotating beacon • LED work lights front & rear • Wide tyres 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE-compliant to EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional: 2-year warranty: €590.00 TÜV road approval / operating permit as workplace machine: €595.00 Transport within Germany & Austria upon request Technical Specifications Engine: 3-cylinder Perkins turbo Power: 25 hp Emission class: Euro 5 Lifting capacity: 980 kg Lift height: 3310 mm (underside of standard pallet fork) Dumping height: 2796 mm (underside of standard bucket tipped) Lift / Lower time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tyres: 31 x 15.5 - 15 Accessories and spare parts available from us. When making inquiries, please provide your phone number!

Kondisi: baru, Load capacity 500 kg Number of suction pads: 6 Diameter of suction pads: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing steel construction, painted in RAL 2000, with low dead weight. Consisting of: - 1x Galvanised longitudinal beam, length 2,400 mm - 3x Galvanised crossbeams, length 1,000 mm - 6x Spring-mounted, articulated, and adjustable suction pad holders - 6x Suction pads Ø 215 mm; in case of wear, seals can be inexpensively replaced without tools, separate from their metal carrier - 6x Ball valves to individually shut off suction pads, allowing smaller formats to be lifted without having to move the pads or beams - 1x Spiral connection cable, small coil: * Extension length 3,500 mm, designed as extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and no neutral conductor is present) - Operating handle extendable up to 1,000 mm from the centre of the beam Iodpfxsq Sc Auj Afioia - Stable sheet metal pocket for your crane controls included, at no extra charge - Operation "Suction / Release" via hand slide valve: Wear-free and very robust hand slide valve ensures secure suction and release following actuation of the release button (double release according to EN 13155) - Control and safety device for vacuum lifter: * Sturdy control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum accumulator tank with safety non-return valve * Double release operation when unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easily understood documentation Guarantee against material and manufacturing defects for one year under single-shift operation (excluding wear parts). Initial safety inspection UVV 18, VBG 9a, with CE declaration of conformity – according to EN 13155 - Packaging for truck transport.

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Iijdpoi Hn Srjfx Afisa Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: baru, Lifting capacity in kg: 1,000 kg Reach: 4,000 mm Height: 3,000 mm (underside of jib) Total column height: 3,790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable system - Drag cable, cable sag approx. 800 mm - Floor-controlled operation via pendant controller Includes: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-fall - Painted in RAL 5017 traffic blue - Lifting capacity: 1 t - Hook path: 3,000 mm - Maximum hook position: 2,442 mm - Calculation basis: FEM 9.901 - Mechanism group: 2m / M5 - Lifting, 2-stage (pole-changeable): 1.3 / 5 m/min - Lifting power: 0.22 / 0.9 kW - Duty cycle: 60% ED - Switching frequency: 360 cycles/hour Iisdexak Hxjpfx Afioa Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set), size LS 200 - Comprising 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation mounting, incl. grouting accessories For the alignment of the slewing jib crane, an assembly gap between the base of the column and the building floor must be provided. This assembly gap is to be grouted by the customer after approx. 4 weeks of crane operation. The illustration shows a similar crane system.

Kondisi: sangat baik (bekas), Boiler suhu rendah Viessmann Vitoplex 270kw Iedswiqlcspfx Afioia

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, x-travel 4216.0 mm y-travel 2007.0 mm Iisdpfx Afsyclvneiea z-travel 305.0 mm CNC control Table size 4902.0 x 2134.0 mm Max. workpiece weight 1465 kg/m² Machine weight approx. 2500 kg Total power requirement 30 kW Required floor space approx. 5486.0 x 3708.0 mm The compact bridge-style waterjet cutting system consists of a torsion-resistant steel construction coated with a special durable anti-corrosion layer. Both X-axes and the particularly elevated Y-axis are based on the maintenance-free Intelli-TRAX drive developed by OMAX specifically to meet the requirements of waterjet cutting systems. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive feed system - High-pressure system with special stainless-steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX PC control software Intelli-MAX for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the 5-axis A-Jet bevel cutting head - Height sensor for the 5-axis A-Jet bevel cutting head - Laser pointer for positioning assistance - Automatic desludging system MBM ASAS-ME - Compressed air injection for the automatic desludging system MBM ASAS-ME - Clamping and mounting set for plate material and material holders - Catch grid in cutting tank - Sensors for automatic process monitoring - Water treatment via water conditioning incl. water analysis - Omni-Start piercing aid (vacuum assist) for brittle and laminated materials

Kondisi: baik (bekas), Tahun pembuatan: 1972, Scissor lift table, scissor lifting table, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1,000 kg -Platform: 3,000 x 2,000 mm -Lowered height: 390 mm Iodjmghawopfx Afieia -Lifted height: 2,000 mm -Hydraulic power unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3,000 x 2,000 x H390 mm -Net weight: 2,100 kg

Kondisi: sangat baik (bekas), Viessmann Vitoplex 225kW heating boiler - suitable for gas or oil burner Iiodpfx Afow Ey Dmoisa

Kondisi: bekas, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Rated load capacity: 1,500 kg Lifting capacity (practically tested): 1,000 kg (at approx. 350 bar) Platform size: 2,100 x 1,400 mm Lift height (max): 930 mm Lowered installation height: 100 mm (with mounting frame) Raised installation height: 1,030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1,000 kg Hydraulic motor power: 1.5 kW Power connection: 400 Volt, 50 Hz Iedpfx Afol Nbqcsioia - Mechanical-hydraulic safety limit switches stop lowering when the safety bar is activated - Without hydraulic power unit - Without electric control unit Mounting frame length: 2,270 mm Mounting frame width: 1,580 mm Mounting frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition