Mesin penjilid buku

Schmedt PräziCase SC-2

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan pemakanan sumbu X: 16 m/menit, laju pemakanan gandar Y: 16 m/menit, laju pemakanan sumbu Z: 16 m/menit, daya nominal (semu): 16 kVA, produsen pengendali: Heidenhain, model controller: ITNC 530, beban meja: 800 kg, berat keseluruhan: 5.300 kg, kecepatan spindel (min.): 10.000 rpm, jam operasional spindle: 8.500 h, daya motor spindle: 12 W, hidung spindel: ISO B40, jumlah spindel: 1, jumlah slot dalam magazin alat: 24, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, konveyor serpihan, Machine in very good condition and maintained by the manufacturer. Nedpowxrgtjfx Aglskt Available immediately. Renishaw probe. Video available upon request. Delivery and installation by our team possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, max. edge banding thickness 0.2 - 15 mm Feed speed 12 / 18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edging Granulate quick-heating tank End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / push buttons Extendable roller support Acoustic enclosure Nkedpfxofbr S Rj Aglot Machine length 3,800 mm Note on used machines: • Technical data is subject to errors and prior sale. • Prices quoted are ex location - free loading! • The machine has been cleaned and functionally tested. • All machines are sold "as seen" without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid if made in writing. (We will only respond to enquiries that include your address and telephone number!)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Control languages: - German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% Nkodpfxjx E Dnco Agljt • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Without sheet reversal (straight printing) Direct Drive InlineColorPilot IPC (Graphometronic): Register control and color measurement and control system PressPilot operator console Nsdpfx Agsx Nm Adslokt APL (fully automatic plate changer): Automatic plate changing system with motorized clamp and tensioning for printing plates IntegrationPilot plus Automatic impression cylinder washing device Automatic ink roller washing device Automatic blanket washing device with brush SelectAntistatic ionization system: feeder & delivery, brand Eltex Non-stop LCS: Low Coverage Stabilisation Software for precise inking unit adjustment at very low coverage Quickstart: Software for optimizing machine control after stoppages Inking unit temperature control Grapho Metronic Technotrans cooling and recirculation QuickChange Infeed: automatic selection and motorized positioning of front lays QuickChange Air: job-specific and reproducible air settings for all relevant air consumers via the operator console Double sheet control – electronic Rolandmatic dampening system Airglide delivery BECKER VariAir compressor cabinet Powder extraction including SCIP self-cleaning system, brand Schneider Dynamic sheet brake Impression counter: 270 million

Kondisi: baik (bekas), Bacciottini Pit Stop 36L Automatischer Rill- und Perforiermaschine Das Gerät ist voll funktionsfähig und sofort einsatzbereit. Es handelt sich um das effizienteste Rill- und Perforiersystem auf dem Markt, mit solider Bauweise. Hergestellt in Italien. Vakuum-Papieranleger, Nonstop-Betrieb mit der Möglichkeit, während des Betriebs Material nachzulegen. Nkjdpfswxtahjx Aglet Integrierter Kompressor. Im Lieferumfang sind Werkzeuge für das Rillen und Perforieren enthalten. Technische Daten: Maximales Bogenformat: 360 × 650 mm Minimales Bogenformat: 80 × 100 mm Maximale Geschwindigkeit (A4-Format): 6.000 Bögen/h Materialstärke: 80–400 g/m² Maximale Anzahl der Rillungen pro Bogen: 20 Abstand zwischen den Rillungen: 0,1 mm Einstellgenauigkeit: 0,1 mm Stromversorgung: 230V Leistungsaufnahme: 1,5 kW Gewicht: 120 kg Geräteabmessungen: 1.500 × 650 × 1.160 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, For Sale. Ficep Tipo G25LG. Full description is attached as a document. Year of manufacture: 2019 Njdpfou Dw I Eex Aglokt For this line, the infeed and outfeed lengths are as follows: Infeed: 8 m Outfeed: 8 m If you would like more photos or information, please contact us.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2008, nomor mesin/kendaraan: LSP 100T, Press hidrolik produksi dengan rangka H 100t dengan pemandu Produsen: Stenhoj, Denmark Tahun pembuatan: 2008 Daya tekan maks.: 1.000 kN / 318 bar Silinder tekan, panjang langkah 400 mm Nodpfx Ajg Rn Efoglskt Meja tekan dengan alur-T 1.500x900 mm atas 1.500x1.050 mm bawah Jarak antar rangka 1.700 mm Kondisi seperti baru, mesin hanya digunakan untuk uji coba dan sejak itu disimpan di gudang. Semua informasi tanpa jaminan. Tanpa biaya transportasi.

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, saluran warna: 5, berat kertas (min.): 40 g/m², berat kertas (maks.): 370 g/m², lebar kertas (min.): 400 mm, lebar kertas (maks.): 800 mm, tinggi kertas (min.): 260 mm, tinggi kertas (maks.): 600 mm, tegangan masuk: 380 V, en001 Nodpewtzp Tjfx Aglokt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Nodeva H Amspfx Aglokt Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: n.n.b., saluran warna: 2, berat kertas (min.): 40 g/m², lebar kertas (min.): 100 mm, lebar kertas (maks.): 520 mm, tinggi kertas (min.): 900 mm, tinggi kertas (maks.): 370 mm, panjang total: 2.700 mm, lebar total: 2.034 mm, tinggi total: 1.720 mm, persyaratan ruang panjang: 3.700 mm, lebar yang dibutuhkan: 3.000 mm, kebutuhan tinggi: 2.220 mm, pembacaan penghitung (hitam): 1.150, jenis arus masuk: AC (pendingin udara), arus masuk: 16 A, tegangan masuk: 200.210.220 V, Perlengkapan: dokumentasi / manual, ikuti melalui desktop Nedpfew R Enmox Aglokt