Bajak salju dengan dudukan garpu

Schmidt FOH

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Kedeifnzdjpfx Aahonf Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open Feed rate m/min (adjustable): 7-35 Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments no.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 20 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Compact Feed speed m/min (adjustable) 6 - 30 Top pressure: V-belt driven Adjustable fence, CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps to heat the sides of the workpieces Gluing station (hot melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Knsdoidqphepfx Aahsf Edge magazine for rolls (compartment No.) 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding liquid) Contour trimming unit (for fine trimming), CNC-controlled 08.348 (KW 0.66 x 2), 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving/rabbetting and profiling 08.183 (Kw 3 x 1)

Tahun pembuatan: 2000, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 13:000 Ltr, Tank & Environmental Protection Wozniack Certified Company under the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 13,000-litre double-walled storage tank for diesel storage as follows: Nominal capacity: 13 m³ Quantity: 1 Used but fully reconditioned, meaning the tank has been cleaned, refurbished, primed, and painted. Colour finish: RAL paint; however, you may also specify your preferred colour at any time. Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate/test certificate in accordance with DIN 6616 D/2 and type plate Includes: - 1 dipstick - 1 vent connection - 1 filling connection - 1 new overfill prevention device - 1 new leak detection unit with filled leak detection liquid - 1 ladder - 1 suction line Design: Cylindrical storage tank with feet/consoles Tank dimensions: Length approx. 6,800 mm plus 500 mm for diesel pump Diameter approx. 1,600 mm Weight: approx. 2,800 kg Above-ground storage Compact diesel dispensing unit AF 3000 (new) with 4 m hose; longer hoses available on request. Kodpfx Aaecl Sb Rohsnf Approved automatic fuel nozzle. Pump: 230 Volt, max. 65 L/min or 230 Volt, max. 90 L/min. ===== Top offer: Liquid fertilizer – AHL tank systems from 10,000 to 100,000 litres. Of course, you can also customise your tank system! All our systems are thoroughly checked and inspected by selected employees in our company. We can also offer economical delivery on request. Inspection of our systems is possible at any time. Additional tank systems for both above-ground and underground storage are available in all sizes and can be viewed at our premises. Have we convinced you with our offer? If you have any questions or requirements, simply give us a call. One of our experienced staff members will be happy to advise you. Price / Shipping The price for the filling station is ex works Warstein, free loaded. Delivery can be arranged at reasonable additional cost. Delivery time = immediate You will receive an invoice with VAT shown separately. In addition, we also purchase existing tank systems and, as a certified company under the German Water Resources Act (WHG), can competently empty, clean, dismantle, and remove them for you. Best regards from Warstein Tank-Umweltschutz Wozniack

Kondisi: hampir baru (bekas), 2,700 m² Schäfer R3000 Mezzanine, 2-Story Knjdpfx Aofiqhfjahof Used item in excellent, like-new condition, see photos. Manufacturer: SCHÄFER R3000 CAD planning and installation available. Price on request! Partial sale possible. Negotiable price: on request! Stocked and immediately available. Transport and assembly can be arranged on request. Viewing possible by appointment at any time. For further information, please enquire. Constant stock of over 5,000 linear meters of pallet racking from various manufacturers. (Specifications, information, and prices subject to change and prior sale. See our terms and conditions. All prices ex-works, VAT excluded.) Purchase / Sale: We are continuously looking for and offering a wide range of items from different sectors. - Swept-clean business liquidations - Company closures - Fast, flexible, efficient! We also handle clearing and/or disposal for insolvency administrators. Please contact us with a few keywords and we will get back to you promptly. To visit our website, please click on our logo!

Kondisi: diremajakan ulang (bekas), Single-sided FORMAT PROCESSING and EDGE BANDING MACHINE (LEFT SIDE) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Edging thickness in battens/strips (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/software: IMATRONIC 121 /01 Feed speed (adjustable) m/min: 6 - 30 FORMAT PROCESSING: Jointing cutter unit with CN control 08.376 (2 x 4.5 kW) Spraying unit (for liquid anti-stick agent) EDGE BANDING SECTION: Lamps for heating workpiece edges Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for rolls (compartment No. 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0–25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°–30° + spraying unit (for sliding fluid) Contour milling unit (for fine milling), CN-controlled 08.348 (2 x 0.66 kW) Multi-profile scraper unit (CN-controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Kjdpfx Aajcr T N Dshjnf Universal milling unit for grooving/rebating and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edge WI (4 x 0.75 kW)

Kondisi: baru, Tahun pembuatan: 2025, de Knodohv U Uvepfx Aahsf

Kondisi: baru, Hydraulic cable winch HAW4000 with electric valve for wheel loaders, excavators, cranes, mini-excavators, tractors, vineyard tractors, and for use in viticulture, horticulture, construction, civil engineering, and many other applications. The hydraulic add-on winch HAW4000 makes a wide range of tasks easier. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm steel cable. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm steel cable. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm steel cable. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard supply: 50 m of 10 mm steel cable. ⦁ For viticulture, agriculture, forestry, and horticulture ⦁ In building construction, civil engineering, and road construction ⦁ For uprooting stumps and trees ⦁ As an add-on winch for forwarding cranes and excavators ⦁ As a winch for tractors, machinery, and grape harvesters A robust steel frame with three-sided mounting options (left, right, rear) using M16 threaded holes. This allows for versatile attachment possibilities. (Threads are cut and painted; for corrosion protection, recutting prior to use is required.) Large, greaseable cable drum ensures long service life for the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil volume up to 200 l/min, max. 240 l/min short-term ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different configurations. Contact us for a consultation tailored to your needs. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope guide: 970 mm Kedpefn Tvkefx Aahonf ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: +50 mm ⦁ Motor width: +300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: AB2024, skylaser marking laser – CO2 laser engraving machine / marking laser is the complete solution for your complex laser engraving, laser marking, and laser inscription applications. Attention: Compare the installed components of the laser systems on offer: Scanlab (R) scanner, IPG Photonics (R) laser, Parker axes (R), Schneider Electric (R) motors, Scanlab (R) controller, German software, cables – all components exclusively manufactured in Germany!!! The laser systems are manufactured 100% according to customer specifications at our plant in Plauen! Competitors often use Chinese components here (it starts with the controller: EZCAD = Chinese origin!!) (* Pricing depends on configuration. This is a brand-new laser machine from our own production.) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology reaches its limits. The adjustable and mobile work table, tailored to your requirements, increases the system's flexibility. You can easily integrate the system into your production line or use it as a stand-alone solution. Our skylaser MARK systems deliver precise and permanent markings (laser inscriptions/engraving) and are suitable for specific laser applications such as metals and organic materials. A wide variety of fonts, application of barcodes, serial numbers, logos, as well as images, are effortlessly possible. Thanks to excellent resolution, virtually all marking requirements can be handled. The software is extremely user-friendly— even complex and demanding marking tasks can be created with ease on the supplied industrial PC. Precise positioning is achieved intuitively thanks to the integrated positioning laser. Because the system has hardly any wear parts and, thanks to IPG Photonics Fiber Laser technology, is nearly maintenance-free, it is especially suitable for industrial applications and continuous operation. - Working area: 110x110 mm or others, e.g., 175x175 mm (dependent on F-Theta lens) optional - Laser source: IPG laser, others available depending on application - Laser power: 20W / optional 30W / 50W - Software-controlled precision axes (X, Y, Z) Kodo Sd Trepfx Aahsnf - Z-axis travel range max. 200 mm - Marking speed: up to 8,000 mm/s - Redundant safety system - Laser classification: Class 1 - Scanlab SCANcube for perfect results - PFEIFER technology industrial PC incl. pre-installed control software - Positioning laser: integrated diode laser for optimal alignment - Options: camera positioning, 3D processing, database connectivity - Nearly maintenance-free

Kondisi: baru, fi-01 Knsdeu Abxfspfx Aahof

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 5.205 h, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 19.572 km, daya: 62 kW (84,30 hp), jenis bahan bakar: diesel, warna: putih, konfigurasi gandar: 4x2, bahan bakar: diesel, tipe perpindahan gigi: hidrostatik, suspensi: baja, volume ruang muat: 2 m³, Perlengkapan: ABS, kebisingan rendah, pendingin udara,