Inverter frekuensi 7,5 kW

Schneider Electric** Altivar 320 ATV320U75N4B

Kondisi: hampir baru (bekas), Rotary vane vacuum pump with oil bath. Available in stock. Pump thoroughly overhauled. With warranty. Nominal flow rate: 300 m³/h Final vacuum: 0.1 mbar abs. For any inquiries, please contact us. Lsdpfeftzzgex Aahoak

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: Lsdpefxyhfjfx Aahsak - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baik (bekas), Schwerlast-Hochdruckreiniger. Zwei Motoren – 90 kW + 1,5 kW. Die Maschine wurde nur wenige Stunden genutzt und anschließend im Lager eingelagert. Lieferung möglich. Lsdpfxoh Rkils Aahsak

Kondisi: bekas, Hydraulic Scissor Lift Table GRUSE Type ELS 0.5-8-1-G-SO Serial No.: 124984 Year of Manufacture: 2017 Load capacity: 300 kg Platform size: 1250 x 800 mm Useful lift height: max. 785 mm Table height - lowered: 345 mm Table height - raised: 1130 mm Motor power: 0.8 kW Power supply: 400 Volt, 50 Hz - Foot switch for lifting and lowering, with emergency stop and key switch for control activation - Single scissor with one lifting cylinder - All-round safety contact strip with limit switches under the upper frame - Adjustable limit switch for upper lift limitation - Table surface with sturdy wooden worktop and airliner rails with lashing eyes - Hydraulic power unit with tank mounted under the table - Feet positioned under the table corners, can be moved with pallet truck Net weight: 250 kg Lsdpfeixq Hnsx Aahoak Very good condition, almost as new

Kondisi: sangat baik (bekas), Feutron Type: 3702/06 Climate Test Chamber, Water-Cooled Laodpfx Aok E Hnqeahsk Technical Specifications: Test Chamber Nominal Volume: 2.0 m³ Dimensions: Outer test chamber, with humidifier console Width: 2970 mm Height: 2370 mm Depth: 1530 mm Rear panel Minimum installation dimensions: Width: 2970 mm Height: 2390 mm Depth: 1550 mm Test chamber internal dimensions: Width: 2000 mm Height: 1000 mm Depth: 1000 mm Doors: Double-leaf, clear opening width 2000 mm, height 1000 mm Heated viewing windows, 2 units, width 500 mm, height 600 mm Feedthrough opening, 1 unit, left side wall, Ø 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature variation, over time ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in air supply without load: Cooling up to 2.0 average K/min Heating up to 2.0 average K/min Humidity range: 10...95 % r.h. Humidity variation, over time ≤ ± 3.0 % r.h. Dew point range, temporarily up to -5...95°C Refrigeration unit: water-cooled, semi-hermetic Bitzer unit Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration unit air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class IP20 Weight: 1300 kg Condition: used Scope of supply: (see pictures) (Alterations and errors in technical data, information subject to change!) We are happy to answer further questions by phone.

Kondisi: baik (bekas), en-GB_Weiss_Type_WK1-1000-70_Climate_Test_Chamber_Water-cooled Lsdpfx Aaorvx Ezohsak

Kondisi: baru, MICROMASTER 440 without filter 3-phase AC 500-600V +10/-10% 47-63Hz Constant torque 55 kW Overload 150% for 60s, 200% for 3s Quadratic torque 75 kW 850 x 350 x 320 (H x W x D) Protection class IP20 Laedpfod R Hgdsx Aahek Ambient temperature -10 to +50°C without AOP/BOP

Tahun pembuatan: 1998, Kondisi: bekas, Central vacuum pump BUSCH RC 0250, electric power: 5 kW, year of manufacture: 1998, price: €2,500, contact person: Mr. Rainer Eckerle Ljdpjw Swiofx Aahoak

Kondisi: sangat baik (bekas), Weiss temperature test chamber We are offering a temperature test chamber. Weiss temperature test chamber, water-cooled Technical specifications: Test chamber designation: WT-600/70 External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Cooling / Heating operation: -70°C to +180°C Temperature change rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Nominal power: 9.1 kW Nominal current: 19 A Required fuse: 32 A slow blow Permissible test specimen weight: Total loading capacity of shelves: 80 kg Test chamber floor: 80 kg, Removable shelf: 40 kg Refrigerants: R 404A / R23 Weight: 675 kg Lsdpfsiqk Abjx Aahsak Type: WT-600/70 Important safety information for buyers: The following points are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Changes and errors in the technical data are subject to confirmation!) We are happy to answer any additional questions you may have by phone.

Kondisi: baik (bekas), Tahun pembuatan: 2021, Inverter frekuensi, konverter frekuensi, konverter penggerak, pengendali, pengatur kecepatan variabel, konverter, inverter - Produsen: Schneider Electric, inverter frekuensi Altivar 630 Laodpsxlzibofx Aahjk - Tipe: ATV630D90N4 - Daya: 90 kW - Input: 380-480V / 50/60Hz / 156 A - Output: 380-480V / 0-500 Hz / 173 A - Jumlah: 2 unit inverter frekuensi tersedia - Harga: per unit - Dimensi: 800/290/325 mm - Berat: 55 kg/unit