Tekan hidrolik

Schoen UTE/B20

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Cgedpsfxyhfefx Aa Tjp Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 1999, Kondisi: bekas, Used Entex Extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Cgodpfx Ajbqt Arsa Tep We can also offer you an Entex PL WE 70!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1967, de-001 Cjdpsl D N Hvefx Aa Tegp

Kondisi: baik (bekas), Tahun pembuatan: 1999, 2846551 Cgedpfstlzdqsx Aa Tep

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Unit baru, stok gudang, siap kirim segera - Kapasitas: 18.000 liter Cgodpfx Aaeu Hma Nj Tjp - Tmax: 450°C - Dimensi dalam (P x L x T): 4100 x 2100 x 2100 mm - Dimensi luar (P dengan rel): 9970 x L 3060 x T (dengan pintu angkat) 6110 mm - Sistem kontrol: Eurotherm Nanodac - Stabilitas suhu (pada suhu nominal tanpa muatan): ±5 °C - Katup udara masuk dan buang otomatis - Pintu angkat elektrik - Gerbong tungku bertenaga listrik - Daya: 247 ± 9% kW - 400 V, 50 Hz - Dokumentasi, deklarasi CE Kami juga menyediakan pemasangan, commissioning, serta pelatihan operator Anda. Silakan hubungi kami! Kami menyediakan tungku industri baru dan bekas. Peninjauan di gudang kami berdasarkan permintaan! Tungku, oven, tungku annealing, tungku pembakaran, tungku hardening, tungku pemanasan, oven curing, tungku pengering, tungku industri.

Kondisi: baru, Cutting range: Round 0°: 270 mm Square 0°: 260 x 260 mm Flat 0°: 320 x 260 mm Round 45° R: 230 mm Square 45° R: 220 x 220 mm Flat 45° R: 230 x 150 mm Round 60° R: 140 mm Square 60° R: 140 x 140 mm Round 45° L: 200 mm Square 45° L: 175 x 175 mm Flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions (LxWxH), approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double miter saw with pivoting saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, as well as solid materials made of stainless steel, iron, etc. in industrial applications - Generously dimensioned cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast and easy workpiece clamping - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and service Scope of delivery: - Bi-metal saw band 2925 x 27 x 0.9 mm - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump Cgedpfx Aeiqt Rlja Tep - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off after completion of cut - Machine base

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Cgedpfx Asva H Amja Top Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Kondisi: sangat baik (bekas), Tahun pembuatan: 1967, Equipment: 1 right-side gripper feed 1 eccentric press 90 kN Cgsdpfx Aaepq H Upe Top 2 narrow, narrow-slide units 3 standard slide units Working Range: Wire thickness range: 0.5 – 3.5 mm Strip width: up to 32 mm Feed length: up to 170 mm Capacity: up to 250 cycles/min.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2020, Press force: 500 t Clear width: 1100 mm Stroke: 600 mm Approx. machine weight: 22.8 t Table size: 1100 x 800 mm Cedeffamvepfx Aa Togp Ram size: 1100 x 800 mm Installation height: 800 mm Hydraulic system: 300 bar Closing speed: 60–200 mm/sec Pressing speed: 0–9.5 mm/sec Opening speed: 28–200 mm/sec Table height above floor: 900 mm Overall height above floor: 5100 mm Max. tool weight: 2000 kg Tool weight upper part: 1000 kg Minimum hall height: 6500 mm Number of press cylinders: 1 pc. Number of traversing cylinders: 2 pcs. Pump capacity: approx. 270 l/min Oil tank: 600 l Main motor: 75 kW Control technology from SIEMENS: S7 Safety control: PILZ Multi

Kondisi: bekas, Drilling capacity in steel (diameter) / mm Throat depth / mm Workpiece height - max. / mm Total power requirement / kW Machine weight approx. / t Space requirement approx. / m Cedpfxsud Ttne Aa Tsgp Table dimensions: 800x800 mm Height: 590 mm