Elektromotor 160 kW 2960 U/min

Schorch KN5315S-AB037-Z

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 532, Lebar tapak: 2,6 Jenis derek: ASX I (dipasang kemudian) Jangkauan: 13,0 m Kapasitas angkat tanpa penjepit: 1.250 kg / 13,0 m Penjepit: termasuk Tata letak derek: di depan kabin Sisi kabin: kanan Gergaji: 1,3 m Alpha Qlu3b Pengukuran: Penghitung Fgsdpsig H Rwofx Aatog

Kondisi: baru, Tahun pembuatan: 2016, 1 piece of overhauled, unused industrial bevel helical gear unit from ASUG. TGL 21815 All gearbox components have been replaced except for the housing! Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 rpm Output speed: n2 = 17.5 rpm Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Fsdegwlrdspfx Aatjgg Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1170 mm !! Gear unit is not equipped with oil cooler !!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 30.000 kg, diameter rotor: 800 mm, panjang rotor: 1.200 mm, daya: 250 kW (339,91 hp), universal-granulator-2025-en Fgedpfew Am Nqjx Aatog

Kondisi: baik (bekas), Waelzkolbengebläse (Roots Blower) Booster Manufacturer: Leybold Model: RUVAC RA 9001 Condition: Completely overhauled, tested and serviced unit available Includes: New paintwork, motor bearings replaced, electrical inspection Warranty: Up to 12 months Fodpod Hh Nvefx Aatogg Delivery time: Available from stock

Kondisi: sangat baik (bekas), SK 50 tool holders (28627) various manufacturers: Bilz Kelch Sandvik Clarkson Fodpfx Aajwl U Tcstjgg approx. 90 pieces

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Einwellenzerkleinerer von Weima Fgsdpoivpttjfx Aatjg Modell - WL6S Hauptantriebsmotor - 22 kW

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: Fgjdpfx Aoyidvdeatog - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: bekas, Anlage aus Spiralfroster. Fedsvvm Afopfx Aatjgg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, berat keseluruhan: 8.200 kg, jenis bahan bakar: listrik, warna: putih, Type HX426 Blade diameter (mm): 650 Number of hammers (pcs.): 30 Feed opening size (mm): 1250 x 250 Screen mesh size (mm): 80 Chip length (mm): 50-80 Throughput (t/h): 8-10 Main motor power (kW): 132 Feeder motor (kW): 7.5 + 5.5 Discharge motor (kW): 5.5 + 5.5 Hydraulic pump motor (kW): 1.5 Conveyor length (mm): 4000 Conveyor length (mm): 10000 Weight (t): 8.2 Note: Throughput depends on the physical properties of the raw material, feeding method, feeding speed and desired output size. Fodpfx Asqmi Irsategg

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Full-automatic finger jointing line: Type Doppel-Pack with automatic infeed with multiple cross-cut saw with stacking unit Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger jointing possible vertical and horizontal Type of glue: PVAC white glue, double-sided glue application Power supply: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely pre-wired up to the control cabinet. Finger length / optional wood cross-section and glue type can still be customized. Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Fgsdpog D Ugkefx Aatog Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (both sides of the part)